Ostale kovinske stiskalnice nakup rabljenega (137)

Leto izdelave: 2005, Stanje: rabljeno, SCHULER HYDRAP SH 630 - 1.6 x 1.3 (2005) Total weight: 74,000 kg Nominal force: 6,300 kN Max. stroke length: 600 mm Shut height: 900 mm Closing speed: 500 mm/s Max. working speed: 23 mm/s Pjdowf D Shspfx Adyjgg Min. working speed: 51 mm/s Base and tool max. (WxH): 2,280 x 1,200 mm Base and tool min. (WxH): 1,250 x 600 mm Minimum tool height: 300 mm Maximum tool weight: 2,500 kg Maximum total tool weight: 5,000 kg Permissible eccentric load: - Left/right: 490 kNm - Front/back: 250 kNm Installed power: 295 kW Rated current: 565 A Voltage: 400 V Frequency: 50 Hz Hydraulic operating pressure: 278 bar Total oil capacity: 5,185 l Oil type: HLP 68 as per DIN 51524

Leto izdelave: 1975, Stanje: rabljeno, številka stroja/vozila: 741 1078, Stroj (stroj za izdelavo čevljarskih sponk) je brez električne omare. 1. Funkcija podajanja žice. 2. Funkciji podajanja pločevinastega traku. Pgodog Rckpjpfx Adyeg

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Na voljo je Reis usklajevalna stiskalnica za orodjarstvo in izdelavo kalupov. Pritisna sila: 1000kN, vpenjalna površina: 1200mm/1500mm, vgradna višina: 1575mm, največja teža orodja: 10000kg, največja obremenitev vrtljive plošče: 4000kg, hod batnice: 1450mm, povratna sila: 400kN, hidravlični tlak: 190bar, pnevmatski tlak: 5bar. Dimenzije stroja X/Y/Z: pribl. 3200mm/4500mm/4100mm. Dokumentacija na voljo. Možen ogled na lokaciji. Pgodpjxt Rl Iefx Adysg

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), Tlačna sila: 3150kN, dimenzije mize X/Y: 2500mm/1600mm, fiksni hod bata: 280mm, število hodov: 20–80 hodov/min, teža: cca 68.000kg. Vključno s transferno in tračno napravo Dreher. Krmilje je okvarjeno. Dokumentacija na voljo. Ogled na lokaciji možen. Podpjxtff Aefx Adyjgg

Leto izdelave: 2001, Stanje: rabljeno, Pressing force: 148 t Material: Carbide rods Process: Extrusion pressing process T O K A I (Japan) Hydraulic extrusion press for carbide rods Model: TP 150 Year of manufacture: 2001 _____ Extrusion cylinder pressing force: 10 – 148 t Cylinder inner dimensions: 300 x 900 mm Cylinder stroke: 900 mm Stroke speed forward/backward/extrusion: 10/11/8 mm/sec Material cylinder tilt angle up to: 60° (90°) Workpiece tray size: 143 x 800 mm Total worktable size: 800 x 1,800 mm Adjustable workpiece support: 50 x 100 mm Hydraulic oil capacity: approx. 400 liters Podpfot Hw Snsx Adyegg Material cylinder heating: 7.5 kW Hydraulic pump: 11 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight: approx. 6.0 t / Machine height: approx. 3.30 m Accessories / Special features: • Designed for the production of round or profiled carbide rods via extrusion pressing of heated, vacuum-processed carbide powder. • The complete extrusion unit with the working cylinder is swiveling, allowing the extruded workpieces (carbide profile rods) to be placed easily onto storage trays situated on a transport device, which can be adjusted longitudinally and transversely by stepper motor and is also partially height-adjustable. • The entire operation can be pre-set and monitored using a conventional MITSUBISHI controller Type A 1SJHCPU. Mobile switch cabinet with indicator devices for heating temperature, angle setting, vacuum, pressure stages. • Four heating circuits: 1x for nozzle, 3x for material cylinder • Material cutting device • Vacuum pump for creating a vacuum in the material area to avoid cracks and air bubbles. Additional various accessories included. Condition: Good to very good – possibly ready for demonstration under power. Rare machine! Delivery: Ex stock – as inspected. Payment: Net, due upon receipt of invoice.

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Tlačna sila: 800kN, največja vgradna višina orodja: 380mm, največja teža zgornjega dela orodja: 300kg, nastavitev hoda: 8mm-140mm, nastavitev višine batnice: 100mm, št. hodov: 100/min, izrez: 350mm, mere mize X/Y: 850mm/670mm, površina batnice: 550mm/400mm. Dimenzije stroja X/Y/Z: cca 2250mm/1550mm/2750mm, teža: cca 9000kg. Stroj je bil leta 2016 v celoti obnovljen s strani proizvajalca (retrofit). Leta 2024 so bili obnovljeni sklopka, rotacijski podajalnik, varnostni ventil stiskalnice in hladilnik hidravličnega olja. Leta 2021 so bili pogonski motor in jermen za vztrajnik predelani na frekvenčno regulirano hitrost. Dokumentacija je na voljo. Ogled na lokaciji je možen. Pedpfx Ajxq Exwjdyegg

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1961, številka stroja/vozila: 64/61, Müller Weingarten press 1600 kN, 8-division Pjdpfx Adsruahhsyjgg ER 160 Year of manufacture: 1961 Pressing force: 1600 kN Maximum sheet thickness: 14 mm Ram stroke: 20–120 mm Ram adjustment: 100 mm Strokes per minute: 45

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Pesto: 135 mm, največja debelina pločevine: 20 mm, največja dolžina upogibanja: 3050 mm, pritisna sila: 80 t, največji delovni tlak: 2975 psi, največja odprtina matrice: 250 mm, razpon kotov upogiba: 1°-42°, kapaciteta olja: 150 l, največja teža orodja zgoraj/spodaj: 40 kg/115 kg. Dimenzije stroja X/Y/Z: pribl. 4000 mm/2050 mm/2450 mm, teža: pribl. 6000 kg. Dokumentacija priložena. Ogled na lokaciji je možen. Pedpfexl Upnjx Adysgg

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), Na voljo je upogibni stroj Durmazlar, ki ga distribuira podjetje Knuth. Tlačna sila: 35t, dolžina upogibanja: 1350mm, moč motorja: 5,5kW, hod: 100mm, število hodov: 17/min, maks. delovni pritisk: 240bar, kapaciteta olja: 150l. Dimenzije stroja X/Y/Z: cca 1400mm/1400mm/2100mm, teža: cca 1750kg, obratovalne ure: 1258h. Ogled na lokaciji je možen. Pgedpfoxguc Rsx Adyog

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), Na voljo je hidravlična preša NDC. Teža: cca 1750 kg. Možen je ogled na lokaciji. Pedpfjxfbcnjx Adysgg

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), A differential-travel press (toggle press) by Bruderer is available. Pressing force: 3200 kN, daylight min./max.: 420 mm/520 mm, clamping table dimensions X/Y/Z: 1400 mm/1000 mm/150 mm, table height: 1030 mm, ram dimensions X/Y: 1000 mm/800 mm, coil feed width and height: 400 mm/450 mm, machine dimensions X/Y/Z: approx. 2350 mm/1850 mm/4550 mm. Documentation available. On-site inspection possible. Psdpsvdu Nvefx Adysgg

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), A Hymag hydraulic press is available. Pressing force: 15t, pressure: 235 bar, stroke: 250 mm, drive: V30 D045, motor power: 7.5 kW, oil capacity: 200 l, overrun time: 40 ms, safety distance: 80 mm. The machine has a leakage at the piston and the position measuring system is not functioning properly. Documentation is available. An on-site inspection is possible. Podpfx Asv Scrnodyegg

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), A Sahinler workshop press is available. Pressing force: 150 t, max. pressure: 244 bar, working width: 1,520 mm, piston stroke: 300 mm, ram dimensions X/Y: 200 mm/1,520 mm, through-hole: 100 mm, table dimensions X/Y: 600 mm/1,520 mm, max. installation height: 610 mm. Approach speed: 9 mm/s, return speed: 10 mm/s, working speed: 5 mm/s, drive power: 11 kW. Machine dimensions X/Y/Z: approx. 2,500 mm/1,000 mm/2,400 mm, weight: approx. 3,000 kg. Documentation is available. On-site inspection is possible. Podov N I Agepfx Adysgg

Stanje: pripravljen za uporabo (rabljen), Pressing force: 10,000 kN, ram stroke: 350 mm, stroke rate: 28 spm, overrun distance: 102 mm, overrun time: 0.2 s, safety distance: 330 mm. On-site inspection is possible. Psdpfowm Nndox Adysgg

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), A disassembled Mecamaq hydraulic press is available. Pressing force: 100 t, max. pressure: 290 bar, main ram diameter: 200 mm / 120 mm, auxiliary cylinder diameter: 40 mm / 25 mm. Main cylinder stroke: 500 mm, max. installation height: 800 mm, working height: 800 mm, usable dimensions X/Y: 700 mm / 500 mm, table dimensions X/Y: 800 mm / 500 mm, working speed: 6 mm/s, return speed: 150 mm/s. Max. tool dimensions X/Y: 800 mm / 600 mm, max. tool weight: 1000 kg. Machine dimensions X/Y/Z: approx. 1000 mm / 1350 mm / 2750 mm, weight: approx. 4000 kg. Documentation available. On-site inspection possible. Podpfjwkiiisx Adyogg

Leto izdelave: 1973, Stanje: pripravljen za uporabo (rabljen), Press force: 1,250 kN, ram stroke: 20 mm – 120 mm, strokes per minute: 50, overrun distance: 54 mm, overrun time: 0.2 s, safety distance: 320 mm. On-site inspection is possible. Pgedpewm Nnkjfx Adyeg

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), Pogonska moč: 23kW, tlačna sila: 800kN, povratna pot: 25mm, čas povratka: 93ms, varnostna razdalja: 148mm, kapaciteta olja: 650l, teža: ca. 7000kg. Vključno z varnostno svetlobno zaveso Sick. Ogled na lokaciji je možen. Pjdpfx Adsw Na E Reysgg

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), Pressing force: 2000 kN, maximum installation height: 550 mm, total power requirement: 72 kW, operating pressure: 210 bar. Includes feed unit. An on-site inspection is possible. Pgsdpfx Adov Tnyteyeg

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Pressing force: 2000 kN, max. stroke: 400 mm, throat depth: 300 mm, distance between ram and table: 965 mm, ram speed (advance/return): 100 mm/s, working speed: 10 mm/s, table width: 1700 mm, working length: 2600 mm, working height: 1080 mm, distance between uprights: 2300 mm. Machine dimensions (L/W/H): approx. 3750 mm/2600 mm/3600 mm, weight: approx. 17,500 kg. An on-site inspection is possible. Pgjdpfjwftdaex Adysg

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Delovna širina: 2500 mm, največja debelina pločevine aluminij/jeklo/nerjavno jeklo: 3 mm/2 mm/1,25 mm, razpon dolžin za polnjenje: 575 mm-2500 mm, razpon širin za polnjenje: 210 mm-1500 mm, največja višina upogiba: 200 mm, največja negativna ukrivitev: 35 mm, največja diagonalna zvitost: 3300 mm, položaj vrtljive mize: 0°/90°/180°/270°, delovna višina: 1150 mm. Hod pritiskalca: 210 mm, pritiskalna sila: 240 kN, hitrost spuščanja in vračanja pritiskalca: 50 mm/s, območje nihanja zgornje letve: 135°, hitrost nihanja zgornje letve: 90°/s, območje nihanja spodnje letve: 135°, hitrost nihanja spodnje letve: 90°/s. Dimenzije stroja X/Y/Z: pribl. 4050 mm/1600 mm/2400 mm, teža: pribl. 13.000 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Pedpfx Aow N Shkodyjgg

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Pressing force: 1600 kN, installation height: 750 mm, max. ram stroke: 500 mm, clamping area X/Y: 700 mm/600 mm, upright passage: 800 mm, lateral frame opening: approx. 450 mm. Distance from clamping plate to floor: 680 mm, ram bore diameter H7: 60 mm, rapid traverse down/up: 500/400 mm/s, max. working speed: 35 mm/s. Dimensions X/Y/Z: 2000 mm/1500 mm/3600 mm, weight: approx. 16,000 kg, control: Panelware. Documentation available. An on-site inspection is possible. Psdpfxsttbd To Adysgg

Stanje: pripravljen za uporabo (rabljen), Press force: 10 t, oil capacity: 300 l, max. pressure: 20 bar, press type: C-frame press, machine dimensions (X/Y/Z): approx. 1250 mm / 1200 mm / 3000 mm. On-site inspection is possible. Pgsdpfxst Uhz No Adyjg

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Max. pressing force: 1000 kN, max. return force: 110 kN, max. stroke: 360 mm, max. operating pressure: 251 bar, installation height: 560 mm, control panel: Siemens SIMATIC OP27, weight: 7.5 t. An on-site inspection is possible. Psdpoum U Sxsfx Adyegg

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), A Köppern Maco roller press (briquetting press) is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting dies: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: helical gear unit, machine dimensions (L/W): approx. 5000mm/5000mm, weight: approx. 15,000kg, control system: Siemens S7-300 Simatic. Includes two new sets of segments and one installed segment set. Documentation available. On-site inspection possible. Pedpeu Dal Hjfx Adysgg

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, power: 3 kW. 2) Single-column press Neff, operating hours: 9,097 h. 3) Single-column press Neff EP 10, year of manufacture: approx. 1950. 4) Single-column press Neff. An on-site inspection is possible. Pgodpevyirkjfx Adysg