Ostala merilna in preizkusna tehnika nakup rabljenega (153)

Stanje: rabljeno, CAN-BUS Digital Data Recorder See also my other offers in the field of automotive measurement technology. 2 units available As shown, without storage medium. The BUSDAQ-VW-ET is also referred to as BUSDAQ-X-ET. CAN nodes: 2-6, 8 on request (expandable with up to 3 MBUS cards; CAN, LIN, ARINC) Baud rate: max. 1 Mbit/s Digital In/Out: 4 (D-sub15) LAN interface: TCP/IP External modem: DSUB9 Storage: Compact Flash Sync plug: BNC Control plug: DSUB9 Kdjdpjwm Ir Uefx Ah Dou Surge protection: 60V Power supply: 10–50 VDC, 200 mW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, We are selling a large, walk-in heat chamber. The chamber was previously used for 24-hour burn-in tests of electronic devices at 60°C. Due to a relocation of production, it is now being sold. The chamber features adjustable temperatures in the range of 40°C to 80°C, with consistency within +/- 1°C. The chamber’s footprint is approximately 13.5 m², with a volume of about 29.2 m³. For detailed dimensions, please refer to the attached dimensional drawing below. Delivery, installation, and technical service for the system were handled exclusively by ThermoTEC. We are offering the chamber EXW (ex works). This means dismantling, loading, and transportation are the responsibility of the buyer. The system includes the following main components: - Insulated chamber constructed from 120 mm thick sandwich panels, providing excellent thermal insulation - Stainless steel floor, 1.5 mm thick, slip-resistant, bonded to 15 mm thick load-distribution plates (rated for rubber wheel loads up to 2500 N) - Door (approx. 200 cm high, 120 cm wide) with access ramp and window - Air recirculation unit with 6 kW heating capacity and approx. 3000 m³/h air circulation - Ceiling lighting, externally switchable (50 W LED) - Parapet ducts on both sides with 6 socket outlets (230 V) - Control cabinet equipped with Siemens S7-1200 controller, 7" color touch panel, data logging and visualization, prepared for external networking, and volt-free switching contacts - Safety features Kodpfxjwk Nahe Ah Dsdu Chamber Dimensions: External (W x D x H): 3200 x 4800 x 2400 mm Door Dimensions (W x H): 1200 x 2000 mm Internal (W x D x H): 2960 x 4560 x 2160 mm

Leto izdelave: 2008, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Laser scanner Scanworks V5 with interface for Hexagon Cimcore / Romer measuring arms. We used it with a Romer V7 measuring arm and no longer need it. Software for point cloud acquisition Scanworks V5.7 64 bit is included. Kodpfx Ahjwfgpco Dedu Complete package with controller, laser, calibration sphere, cables, certificates, and software. Ideal as a replacement for existing systems to ensure reliability and minimize downtime.

Leto izdelave: 2021, Stanje: skoraj kot novo (rabljeno), (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. Kedpfx Aewurq Rjh Dsdu All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Several Vega Swing83G1Z5Ex level switches and Vegaflex 62 level sensors for sale. Quantity of Vega Swing83G1Z5Ex level switches: 32 units (18 units with PN16 DN50 flange / 12 units with 1.5 inch thread / 2 units with 1.0 inch thread) Quantity of Vegaflex 62 level sensors: 11 units (2 units with PN16 DN50 flange / 9 units with 1.5 inch thread) Vega Swing83G1Z5Ex: Length: 500 mm Kodpfou U D Iqox Ah Dodu Type: S83GZO.ZAK050X Vegaflex 62: Type: FX62.CXXGD1HKMXX Price is 190 EUR per sensor. Price negotiable when purchasing multiple units.

Stanje: kot nova (razstavni stroj), 34317387, L40/620/DB-AZ48/90, Radium Xeradex Xenon Excimer Lamp - Like New Kdsdpfx Asq S S Ttjh Dju Model: 34317387 Condition: Like new

Stanje: rabljeno, 2 units available Kdsdpfx Ahowm Inpj Deu See also my other listings in the field of automotive measurement technology

Stanje: pripravljen za uporabo (rabljen), Mettler Toledo ICS425 K-3XS/DR/F/m/65 Precision Scale Industrial Scale 3 units available. For description, see image 2. Description has been adopted. You are welcome to arrange a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description purposes. Kdjdsp E Dk Hopfx Ah Dou Deviations from technical data and errors in item description may occur and are subject to correction.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. The unit was removed from a laboratory and is offered solely as a donor for spare parts or for repair purposes. No functionality test has been performed – therefore, the device is considered defective for the purpose of this sale. Technical Specifications – Oxford Instruments X-Strata 960 (non-binding) Kjdpfx Ashaapfjh Dedu Feature Description Model X-Strata 960 Manufacturer Oxford Instruments Analysis Method X-ray Fluorescence Analysis (XRF) Application Areas Coating thickness measurement, materials analysis, precious metal testing Measurement Geometry Top-down or bottom-up irradiation, depending on configuration Radiation Source X-ray tube (e.g., Rhodium anode), 50–100 W output Detector Proportional counter or Silicon Drift Detector (SDD), depending on version Measurement Range Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size Approx. 15 μm – 1 mm (depending on collimator) Z-Axis Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H) Approx. 580 × 510 × 230 mm Sample Table Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System Optical / Laser focus, partially automatic Operating System Integrated industrial PC with Windows-based evaluation software Power Supply 220–240 V / 50–60 Hz / approx. 500–800 W Device Weight Approx. 150–200 kg (depending on configuration) Condition: Used / Defective / For Spare Parts Scope of Delivery: As shown in the images – no accessories or software included Important Notes: This item is expressly sold as a defective unit with no functional guarantee. The product is offered as a parts donor or for repair projects. No guarantee for functionality, completeness, or technical specifications. Commercial sale excluding any liability for material defects, pursuant to § 447 BGB (shipment purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the photos - No additional parts, accessories, or documentation included unless explicitly listed. Shipping & Collection: - Collection in Borken possible and preferred - Shipping can be arranged upon request. (Changes and errors in the technical data and information reserved!) For further questions, please feel free to contact us by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, (Please state your offer price) Kdsdpfx Ajwurqkoh Deu Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Leto izdelave: 2016, Coordinate measuring machine Cybersan CT-300 LCHR, original price 180,000 EUR Year of manufacture: 2016 Price: €39,000.00 Kjdpfot Sig Ujx Ah Djdu Contact person: Mr. Rainer Eckerle

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, 30 MHz analog/digital oscilloscope HM305-2 Kjdpfxevzbcde Ah Dsdu

Stanje: rabljeno, 2 units available See also my other offers in the field of automotive measurement technology. Ksdpswm Imxofx Ah Dsdu Bandwidth up to 100 kHz Safe voltage measurement in DC high-voltage systems Galvanically isolated high-voltage divider For applications in electric and hybrid vehicles Direct connection to SENS modules Permissible application areas according to CAT I and CAT II

Stanje: dober (rabljeno), Leto izdelave: 2005, Andreas Schmid Climate Test Chamber -40°C to +130°C Kdodeuuibkepfx Ah Dju Manufacturer: Andreas Schmid Model: VKT 3.000 /-40/+130 Temperature range: -40°C to +130°C Program controller: Stange SE - 502 Mains voltage: 400 V Rated current: 32 A Refrigerant: R 404 A / R 23 Year of manufacture: 2005 External dimensions: W 1600 x D 800 x H 2430 mm TK-16 You can find more items – both new and used – in our shop! International shipping costs available on request!

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Horiba Here we offer you a Horiba exhaust gas analysis system Mexa 7100D. Kedpfx Ahegkglxe Dodu Including JAG-10-000-061 gas cylinder trolley approx. 1200 x 1064 x 802 mm and OVN-724A Suitable for: - Stationary exhaust gas measurement before/after exhaust aftertreatment - Assessment of exhaust aftertreatment systems - Modal analysis (dynamic or transient analysis) during non-steady state operations Analyzer for CO/CO2 (HC, NO, N2O, SO2), O2, THC 200 operating hours Weight: 620 kg Year of manufacture: 2016 Model: Mexa 7100D Condition: used Collection from site Scope of delivery: (see picture) (Subject to change and errors in technical data. Information is provided without liability!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 2011, Vacuum Tube Lifter Schmalz Jumbo Sprint Year of manufacture: 2011 Price: €4,900 Contact: Mr. Rainer Eckerle Kodpfx Asu H D Uqjh Djdu

Stanje: zelo dobro (rabljeno), ELEKTRO-AUTOMATIK EA power supply unit Ksdpfx Ahowh Nv Rs Dedu PS8240-170, 3U 19" rack, 3U LCD, 15,000 W 240 V, 170 A, 15 kW

Stanje: zelo dobro (rabljeno), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance Meets Intelligence Upcoming vehicle generations will increasingly be equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever larger volumes of data, making fault analysis during the development phase more time-consuming and challenging. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the benefits of an intelligent and high-performance data logger, like those in the GL5300 series, come into play. Kodpfx Ahot R R Uwj Dedu The GL5300 series covers time-synchronous recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and even Ethernet networks (TCP/UDP/DLT/ADB and Ethernet Raw Logging). This series also allows connection of up to 8 cameras and up to 5 GLX504 modules for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 modules for synchronous logging of up to sixty 100-Base-T1 (30 taps) and up to eighteen 1000-Base-T1 links (9 taps). Residual bus simulation Classification device Gateway CCP/XCP on CAN, XCP over CAN FD, XCP over FlexRay, XCP over Ethernet Transmission of any freely configurable messages Selective logging (with extensive trigger and filter settings) Data transfer via LAN/WLAN, USB, and mobile network Operation via menu control Technical Specifications: GL5300 Configuration GL5350-8H-1R3L CAN interfaces: CAN 2.0: 16 CAN FD: 4 LIN interfaces: 5 RS-232 interfaces: 7 Analog inputs 10 Bit: 4 Operating voltage: +7 V … +50 V Power consumption at 12 V: approx. 10.3 W Current draw at 12 V: Sleep mode: < 2 mA Half-sleep mode: approx. 180 mA Operation: approx. 860 mA Operating temperature range: -40 °C... +70 °C Enclosure: Material side profiles: Al Mg3 Cover: EN AW-6060 (AlMgSi0.5) T66 Trim strip: ABS Dimensions (LxWxH): 212 x 290 x 80 mm Weight: ~3500 g Condition: used Scope of delivery: (See image) (We reserve the right to make changes and correct any errors in the technical data and information provided!) For further questions, feel free to contact us by phone.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, SPITZENBERGER & SPIES On-board Network Simulation Supply Simulation System PAS 15000/GN/KFZ/OPD The device is from VW Update: Device has been completely overhauled by the manufacturer As pictured. According to the manufacturer, the following tests can be performed: Audi BDM LAH XXX.915.181.XX ISO 7637-2 ISO 16750-2 ISO 21848 LV 124 SAE J 1113-11 VW TL 80101 VW TL 82066 VW TL 82366 Among others, the following components are installed: Power Supply NT 15000/GN/Kfz SyCore 2-Quadrant Amplifier PAS 15000/GN/Kfz Overvoltage Protection Device OPD 15000/GN/Kfz The operating manual can be sent in advance by email upon request. Inspection is welcome. Kdodpfx Ajwg Rzfsh Dsu See also my other measurement and testing equipment offers.

Stanje: zelo dobro (rabljeno), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular unit for determining melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 to +400°C (extendable up to 500°C). Device features: - Microprocessor for automatic testing, storage of test conditions (25 methods), storage and saving of results from 40 tests; Kdodpfevx Sxdex Ah Deu Automatic calculation and display of temperature values and rheological baseline data RS 232 and USB ports Diagnostics Automatic rotary cutter for extrudate cutting Nozzle locking Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions can be controlled via the computer. The Visual MELT software is used. Standards: ASTM-ISO-DIN-BS-NF-UNI-GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the weight + automatic cutter for extrudate cutting, Code 7026.000 Max force: 1200 N Stroke (mm): 220 Voltage: AC 230 V/50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Max speed: 10 mm/sec Condition: used Scope of delivery: (see picture) (Technical specifications are subject to change and errors excepted!) For further questions, please feel free to call us.

Stanje: rabljeno, Leto izdelave: 2005, Stromversorgung Delta Elektronika SM 300-10D 300V 10A Serie SM3000 3000W Kodpfxetn Nnxj Ah Dsdu

Stanje: zelo dobro (rabljeno), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with chiller and S10 autosampler The optical system of the Optima 7300 V enables simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured in seconds for exceptional sample throughput, and all raw spectral data is stored with complete reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, reducing the need for repeat sampling, saving both time and money. The Optima 7300 V has been specifically designed to meet the unique challenges of oil sample analysis and the analysis of specific metals in laboratories, offering the following features: - Traditional vertical burner configuration with radial view - Reliable sample introduction system - Proven high-performance optical system - Robust solid-state generator - Two available models: Oil version for oil analysis and HF version for geochemical and high-solid content analysis Technical Data: - Wavelength range: Ultraviolet from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm - Spectral background measurement possible simultaneously with the analyte line - Solid state 40 MHz signal generator - Dimensions: 150 x 76 x 89 cm (W x H x D) - Power supply: 200-240 V, 20 A line, single-phase, 50/60 Hz - Maximum power: 2800 VA - Rated current: 15 A - Recirculating chiller: PolyScience Recirculator N0772025 - Power supply: 200-240 V 50Hz - Weight: 200 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and descriptions are reserved!) If you have any further questions, we are happy to assist you by phone. Kdodpfx Ahov Hzpus Dju

Stanje: rabljeno, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters PAL System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary Solvent Manager Kdjdpsvcnpaofx Ah Deu Flow rates from 0.10 to 5.00 µl/min Flow Control Module Flow from 0.20 to 5.00 µl/min Sample Manager The sample manager injects samples drawn from microtiter plates or vials into the chromatographic flow path. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or in less than 60 seconds, including a double standard wash. The sample manager accepts plates with a standard footprint, 5.03 $0.02 in x 3.365 $0.02 in, compliant with SBS/ANSI plates (maximum height of 2.2 in, including lids). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or lower. Heater and Capture Module Inner diameter up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient up to 65 °C (149 °F). The column base can be pivoted outwards to any position between 0° and 180°. In the 0° position “Home”, the column base is directly above the sample manager and can be connected to an optional optical detector. In the 180° position “away”, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used solely for peptide identification (LC-MSE data-independent acquisition), as well as for denaturing and native MS analysis. Documents & Downloads Data sheet: Operating Manual Condition: used Scope of supply: (see image) (Changes and errors in the technical data, information subject to change!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vision Engineering Specifications of the Vision Engineering Microscope: Eyepiece-free Kdedpfx Ajtqnklsh Dou Three-dimensional observation 3.5x - 120x stereo-zoom magnification Features: Optical type: Application: Laboratory, inspection, research, forensics, dental laboratory, welding Observation technique: 3D Configuration: benchtop device Options and accessories: USB camera, zoom Magnification Min: 3x / Max: 240x Description: Lynx EVO was designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge – inspection, reworking, or review – you will work more comfortably and with greater focus thanks to high-resolution, high-contrast 3D stereo images. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Increased efficiency: Lynx EVO provides improved hand-eye coordination, more working space for tools, and better peripheral vision for easy interaction with the broader work environment, changing the way you work. No adjustment of eyepieces is necessary, making it easy to share the device between multiple users for maximum return on your investment. Condition: used Scope of delivery: (See image) (Specifications and details are subject to change or error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), KSE Leak Test Stand We are offering a KSE Leak Test Stand. Test stand for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Kedpfxoiu H Hcj Ah Dodu Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors in the data provided!) Further questions can gladly be answered for you by phone.