Pribor in rezervni deli za žage (les) nakup rabljenega (61)

Stanje: zelo dobro (rabljeno), Linjalo za Raimann KM 310 Giolhcdwsyaxdaovet

Stanje: rabljeno, Oblikovalci za tračno žago, različni modeli Gislhcdstzga Rewvet

Stanje: dober (rabljeno), Originalni distančni obroči PAUL v različnih širinah za čelilno žago KME 2, BM, zunanji premer 120 mm, premer izvrtine 75 mm, z 2 utoroma za pero. Originalne žagine puše PAUL z uporabno vpenjalno dolžino 55 mm in 110 mm za KME 2, BM. Originalni distančni obroči PAUL v različnih širinah za dorazno žago S 900, zunanji premer 150 mm, premer izvrtine 110 mm, z 2 utoroma za pero. Giolhcjiimz Asdwvst

Stanje: zelo dobro (rabljeno), Original distance rings 145 mm Ø x 86 mm Ø with 1 groove, 16.5 mm, available in various widths; 1 used saw shaft, 60 mm Ø, with 2 keys, 16 mm wide, including 1 sliding bush, 120 mm effective clamping length, with left-hand thread clamping nut suitable for right-side machine, and bearing bush for front flap. Gijlhcdswaiaaewvjt

Stanje: delavnici obnovljeno (rabljeno), 1 par ploščatih motorjev PERSKE po 5,5 kW, primerni za predrezne krožne žage pred žagalnimi linijami z blok trakastimi žagami, en z desnim ter en z levim navojem, za neprekinjeno delovanje 5,5 kW, z novimi krogličnimi ležaji, z 2 jeklenima konzolama (L + D) za montažo. 1 kos krožnožagini ploščati motor KATT 11 kW / 1450 obr/min, prirobnica Ø 200 mm, desni navoj, drugi končni del gredi za pogon hidravlične črpalke z jermensko jermenico Ø 150 mm, preizkušen in na novo ležajen, npr. primeren za prečno žago PAUL 27 AO. Goleuqk Azehcdwvoit

Stanje: novo, Širina: 100 mm Dolžina: ca. 20 m Gelhow Uig Uecdwvjit Zobati jermen v metraži 100 mm, primeren za žage Reinhardt.

Stanje: rabljeno, Izvrtina: 50 mm Zunanji premer: 60 mm Največja hitrost: 9.000 vrt/min Gieloxvchmjhcdwvot Dolžina: 100 mm Material: jeklo

Stanje: rabljeno, Število vrtljajev: 2.700 vrt./min Motor: 0,24 kW Gslhcdsw Uz Rrowvjit Žagalna enota vključno s kablom in stikalom.

Stanje: rabljeno, Luknja: 70 mm Gjlhcewrrdrsdwveit Širina: 6,0 mm Premer: 250 mm Rezila: 20 + 2 Krožno žagin list ali utorna žaga v zelo dobrem rabljenem ali skoraj novem stanju.

Stanje: rabljeno, Izvrtina: 30 mm Širina: 3,5/4,8 mm Gielhcjwcpnpsdwvst Krožni premer (ø): 500 mm Material: Jeklo Rezila: HW WZ Z144

Stanje: rabljeno, Trdi disk: prazen Tehnični podatki: na zahtevo Stanje: delujoče Golhcdwjt N Ag Novjit

Stanje: rabljeno, Premer izvrtine: 30 mm Širina: 3,8 mm Premer kroženja (ø): 500 mm Material: jeklo Gieletddxvohcdwvet Rezilo: HW Z72

Stanje: rabljeno, Izvrtina: 30 mm Širina: 3,7 mm Premer kroga reza (ø): 494 mm Gelhcdjtddxrswvsit Material: jeklo Rezilo: HW WZ Z72

Stanje: rabljeno, Luknja: 30 mm Gijlhcerucqcodwvjt Širina: 5,2/3,2 mm Delovni premer (ø): 500 mm Razmak med luknjami: ca. 60 / 63 mm Material: jeklo Rezilo: HW WZ Z120

Stanje: rabljeno, Izvrtina: 60 mm Širina: 3–5 mm Gelholf I D Eecdwvjit Premer: 370–380 mm Razmak izvrtin: 100 mm - kot nove ali nabrušene, - 8 kosov, - primerno za Holzma OPT HPP 350 ali podobne.

Stanje: novo, nove distančne obroče za PAUL KME 2 in BM, z izvrtino Ø 75 mm, zunanjim Ø 120 mm, v širinah 41, 30, 26, 22, 20 in 10 mm; nove distančne obroče za PAUL K2V, z izvrtino Ø 60 mm, zunanjim Ø 90 mm, v širinah 40, 30, 20, 10, 2, 1 mm; puše za žagne gredi Ø 60 mm, 50 mm, 45 mm in 40 mm; nova CV žagna rezila, trdo kromirana, različnih Ø za KME 2, BM in K2V. Gjlhceh Anyfodwvsit

Stanje: dober (rabljeno), Complete feed mechanism from an Esterer HDN 600 frame saw Recently removed due to conversion to frequency-controlled feed. Immediately available Giolhcdsr Hmhnjwvet Location: Austria, near Wels

Stanje: rabljeno, Dolžina valjčnega transporterja 1: 340 cm Golhcdoyarm Uewvsit Dolžina valjčnega transporterja 2: 190 cm Širina valjev: 56 cm Dva valjčna transporterja Paul, primerno za podmizno potezno žago AO ali podobne stroje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, - Stack length: 2500 mm - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) Gjlhew Ec Iuscdwvoit - Max. payload: 4500 kg - Motor drive, roller conveyor: 0.37 kW - Motor drive, stop ruler: 0.37 kW - Motor drive, electrohydraulics: 2.2 kW - Dimensions: 2500 x 1900 x 2600 mm - Weight: 2600 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, GMF Kelengaanpengukur Lengkap 2.500 mm atau 3.000 mm atau 4.000 mm 1.) Panjang dasar: 1.500 mm atau 2.000 mm 2.) Ditambah ekstensi 1.000 mm atau 1.500 mm atau 2.000 mm Termasuk pengisi daya dan penerima. Rel pengukur aluminium yang kokoh ini sangat ideal untuk pengukuran lis kaca. Cara Kerja Untuk penggunaan pada pintu dan daun jendela besar, kelengaanpengukur GMF dapat diperpanjang secara mekanis hingga panjang pengukuran 4.000 mm dengan aman dan cepat. - Deteksi ekstensi otomatis Akurasi ± 0,1 mm Resolusi 0,02 mm Transmisi pengukuran melalui antarmuka radio ke sistem kontrol atau PC Golhcexu Hyqsdwvjit Pengisi daya mikrokontroler untuk baterai dengan tegangan input 100-240 V dan adaptor daya untuk Euro/UK/US/AUS CATATAN: 1.) Perangkat lunak penerima HECHT diperlukan di PC pelanggan – tersedia terpisah atas permintaan. 2.) Dapat dipasang retrofit pada stopper panjang HECHT Exenso Comfort yang diproduksi sejak 2016 – tersedia terpisah atas permintaan. 3.) Dapat dipasang retrofit pada gergaji potong ganda HECHT DS350 yang diproduksi setelah 2018 – tersedia terpisah atas permintaan.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pneumatic Pressure Clamp ensuring precise adherence of the workpiece to the table of the panel saw. This results in enhanced precision and cutting quality, facilitating and accelerating the panel sizing process. The clamp is very simple to install and operate. Application of a woodworking pneumatic pressure clamp for a panel saw: Lack of proper pressure securing the panel to the panel saw table is an issue that brings several potential consequences, significantly affecting the efficiency and quality of the cutting process. These problems include: Uncontrolled chipping: Without a solid pressure clamp, the panel may not be stably fixed on the table. In such cases, cutting can result in uncontrolled chipping, posing hazards to operators and potentially damaging tools and workpieces, thereby increasing production costs. Excessive material waste: Insufficient pressure may cause the panel to shift during cutting, leading to material losses since the misplaced panel can be cut incorrectly, requiring additional trimming or even scrapping the entire piece. Edge fraying: An unstable clamp can cause vibrations and inaccurate cutting. This, in turn, leads to edge fraying, negatively affecting the appearance and functionality of the workpieces, especially for finishing materials. Benefits of using a dual-section, 3200 mm pneumatic pressure clamp for panel saws: The solution to these issues is the use of a pneumatic pressure clamp which ensures the material is firmly pressed against the table throughout the cutting process. The resulting benefits include: Increased cutting precision: The pneumatic clamp allows secure and even fixing of the material to the table, resulting in higher cutting accuracy and eliminating uncontrolled chipping and edge fraying. Improved cut quality: Thanks to stable holding, the cutting quality is significantly enhanced. Panels are cut evenly without damage, increasing their value and aesthetics. Faster and easier panel sizing: With secure clamping, operators can work more efficiently and safely, speeding up the entire sizing process and thus increasing production throughput. Simple installation and operation: The pneumatic clamp is straightforward to install and operate, requiring no complex procedures and providing easy control. 2-zone clamping: The pneumatic clamp features two zones, with each side (2 cylinders per side) of the saw table independently controlled. This offers greater flexibility and allows adaptation of the clamping force to different material types and production requirements. In summary, the pneumatic pressure clamp is a reliable solution that improves the quality, precision, and efficiency of panel cutting, leading to time and material savings while minimizing the risk of damage and accidents. Golhcdsvxtcqswvsit Technical specifications: Clamping length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Stanje: rabljeno, Saw blade, wood saw blade, circular saw blade - 0402-5021202 HW - UFN - fitted - Ø 200 x 4.1/2.8 x 65 Golhcdwsb Uhltevsit - Z36 = T 17.44 - n max. 9000 - Price: per piece - Quantity: 2 available - Weight: 0.7 kg/piece

Stanje: rabljeno, Saw blade, wood saw blade, circular saw blade - Ø 355x4.3/3.2x30 mm Gielhcdeb Uhl Howvjt - 72 teeth = T 15.49 - Max. speed: 5,500 rpm - 0904-1041782x HW - UFN-tipped - Price: per piece - Quantity: 1 available - Weight: 2.6 kg/piece

Stanje: rabljeno, Saw blade, wood saw blade, circular saw blade Gijlhcsb Uhl Tsdwvjt - Ø 350 x 10.0–11.8 x 60 mm - Teeth: 36 (Pitch: 30.53 mm) - Max. speed: 5,500 rpm - Part no.: 0299-995600572 - Price: per piece - Quantity available: 5 pcs - Weight: 6 kg/piece

Stanje: rabljeno, Saw blade, wood saw blade, circular saw blade -0504-5041355x HW -UFN - equipped -Ø 200x4.0-7.0/3.0x70 -Z12 = T 26.16 -n max. 9000 Gielhcsb Uhlyedwvot -Price: per piece -Quantity: 1 available -Weight: 0.7 kg/piece