Vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm nakup rabljenega (203)

Stanje: dober (rabljeno), Leto izdelave: 1980, LZ stružnica proizvajalca VDF HEIDENREICH&HARBECK, tip: 21 RO, letnik ca. 1980, z dvoosnim digitalnim prikazovalnikom Heidenhain ND 730, hitri pomik v vzdolžni in prečni smeri. Vpenjalna glava 200 mm Forkardt, nosilec orodij Multifix velikost B z dvema držaloma za orodje, 1 fiksna in 1 premična podpora. Višina konic: 240 mm Dolžina med konicami: 1250 mm Vretenova odprtina: 55 mm Obrati vretena: 19 - 2000 obr/min Moč motorja: 5,5 kW Ihodpjw S Itusfx Adksw Prostor potreb: D 3,1m Š 1,2m V 1,3m Teža cca 2000 kg Stroj v dobrem stanju.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, LZ lathe, manufacturer: KERN, type: DS 20 AL, year approx. 1970 Equipped with 3-jaw chuck Forkardt 250 mm, quick-change tool post Multifix size C with holders, and coolant system. Swing over bed: 500 mm Swing over cross slide: 250 mm Distance between centers: 1000 mm Spindle speeds: 12 - 1200 rpm Ihedsgqxcispfx Adksw Machine powered on and can be demonstrated under power. Good guides.

Stanje: dober (rabljeno), Leto izdelave: 1972, LZ-strojni stružnica Izdelovalec: HEIDENREICH & HERBECK Tip: 21RO l. 1972 s hitromenjalnim držalom Parat (10 kosov), dokumentacija za stroj, natančni kazalnik navojev, koničast hrot, 250 mm Forkardt vpenjalno glavo. Ijdpfot Ipi Iex Adkjhw Premer struženja nad posteljo: 430 mm Premer struženja na suportu: 255 mm Dolžina med konicama: 1000 mm Dolžina struženja: 750 mm Hitrosti vretena: 19–2000 min⁻¹, motor 5,5 kW Premer luknje vretena: 56 mm Ostali podatki v tehničnem listu Potrebni prostor: dolžina 2900 mm, širina 1100 mm, višina 1300 mm, teža cca 1750 kg. Strojna dokumentacija priložena. Vgrajena hladilna naprava, zadnja stena za odvajanje odrezkov. Stroj je v dobrem stanju, možen preizkus pod tokom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, LZ lathe, Manufacturer: SASTA STANKO, Type: SA562M, Year of manufacture: 1996 Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 1500 mm Spindle speeds: 16–2000 rpm Spindle bore: 55 mm Chuck diameter: 250 mm (Forkardt), Toolholder: Multifix size C. Machine with rapid traverse on X and Z axis. Machine is in good overall condition. Iodpfx Adsvkuauokohw For further technical details, please refer to the data sheets.

Stanje: novo, Leto izdelave: 2025, 3-jaw chuck 200 mm Max. turning diameter over bed: 410 mm Turning diameter over cross slide: 255 mm Turning diameter in bridge gap: 580 mm Distance between centers: 1000 mm Center height: 205 mm Cross slide travel: 140 mm (precision 0.02 mm) Compound slide travel: 210 mm (precision 0.02 mm) Longitudinal travel: 750 mm (precision 0.2 mm) Bed width: 250 mm Spindle bore: 52 mm Spindle mount: D1-6 CAMLOCK Spindle taper: MT6 Tool post dimensions: 100 × 100 × 32 mm Max. tool size: 20 × 20 mm Spindle speeds: 16 steps, 45 – 1800 rpm Spindle speed ranges: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric threads (42): 0.2 – 14 mm/rev Inch threads (42): 2 – 72 TPI Module threads (18): 0.3 – 3.5 mm Diametral pitch threads (21): 8 – 44 DP Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Tailstock quill diameter: 50 mm Tailstock quill travel: 120 mm (precision 0.02 mm) Tailstock taper: MT4 Main motor power: 2.2 / 3.3 kW Coolant pump power: 90 W Dimensions (L × W × H): 2050 × 900 × 1650 mm Isdpfoxdbxyjx Adkehw Weight: 1600 kg

Stanje: pripravljen za uporabo (rabljen), Strung frontal DP 2000 Diametru mandrinei: 2000 mm Lungime: 3500 mm Ijdpfx Ajv Hx R Nsdkehw Greutate: aprox. 22 t

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Razdalja med konicama: 750 mm Premer struženja nad posteljo: 430 mm Vretenina odprtina: 42 mm 24 hitrosti: 14 - 1400 vrt/min Pogonska moč: 5,5 KM Teža cca: 2 t Oprema: lyneta, Multifix, Forkardt-patrona Stanje: Stroj deluje dobro; vzdolžno vodenje ni več v dobrem stanju. Ihjdpfx Adeycrwfjkow Stroj je ugoden in primeren le za enostavnejša dela.

Stanje: novo, Leto izdelave: 2026, Universal Lathe CORMAK TORNADO 460x1000 Key Machine Advantages - Versatile applications: turning cylindrical, conical, internal and external surfaces; drilling, broaching, polishing, and extensive threading capabilities. - Powerful 5.5 kW motor provides smooth operation even under heavy load. - Large spindle bore ø82 mm allows machining of long and heavy shafts. - 2-axis digital readout with optical scales enhances operational precision and operator comfort. - Removable gap bridge enables machining of workpieces up to 690 mm in diameter and 240 mm in length. - Robust cast iron construction with a hardened and ground 300 mm wide bed for reduced vibration and increased machine durability. Construction and Technology The core of the CORMAK TORNADO 460x1000 lathe is a massive, precisely machined cast iron bed, ensuring stability under all working conditions. The spindle, with a D1-8 nose and mounted in a reinforced bearing system, guarantees high rigidity and smooth operation at speeds ranging from 25 to 2000 rpm. The use of hardened and ground gears provides the headstock with exceptional durability and quiet operation. Precision and Operating Efficiency An integrated digital readout for the X and Z axes enables precise tool positioning, ensuring high process repeatability. A rapid traverse joystick simplifies carriage operation, reducing setup and finishing times. The thread dial indicator makes engaging the carriage quick and easy, eliminating the need for manual thread counting. Standard Equipment - 3-jaw chuck 250 mm + inside and outside jaws - 4-jaw chuck 320 mm + inside and outside jaws - Fixed and travelling steadies - 2-axis DRO (optical scales) - MT7/MT4 reducing sleeve - Change gears, coolant system, work light - Fixed center MT4, lubrication pump, complete service tool kit - CE-compliant safety guards, user manual in Polish, CE declaration of conformity Optional Equipment - MK4 turret head - MK4/B16 drill arbor - 3-16/B16 drill chuck - HSS-Co5 cobalt drill set / 1–13 mm - ES-12 coolant 1L - Taper turning attachment Technical Specifications: Swing over bed: ø460 mm Swing over cross slide: ø274 mm Swing in gap (diameter x width): 690 mm x 240 mm Centre height: 230 mm Distance between centers: 1000 mm Bed width: 300 mm Max. tool shank size: 25 x 25 mm Cross-slide travel: 290 mm Top-slide travel: 120 mm Spindle bore: ø82 mm Spindle nose: D1-8 Iedpfxovzzffo Adkshw Spindle bore taper: ø90 (1:20) Number of spindle speeds: 12 Spindle speed range: 25–2000 rpm Lead screw diameter and pitch: ø35 mm x 6 mm Imperial threads (TPI): 2–112 TPI (60 settings) Metric threads: 0.1–14 mm (41 settings) DP gears: 4–112 D.P. (50 settings) Module gears: 0.1–7 M.P. (34 settings) Longitudinal feed: 0.054–3.04 mm/rev (42 settings) Cross feed: 0.037–2.048 mm/rev (42 settings) Tailstock quill travel: 120 mm Tailstock quill diameter: ø60 mm Tailstock taper: MT4 Main spindle motor: 5.5 kW Coolant pump motor: 0.09 kW Overall dimensions (LxWxH): 2170 x 1040 x 1340 mm Net/Gross weight: 1750/2000 kg

Stanje: novo, Leto izdelave: 2026, This lathe series is suitable for a wide range of operations, including turning internal and external surfaces, taper turning, polishing, threading (metric, imperial, modular, and DP), drilling, and internal broaching. Machine features - The CORMAK 410x1000 series lathe is designed for versatile applications such as internal and external turning, taper work, polishing, threading (metric, inch, modular, and DP), drilling, and broaching. - Standard equipment includes a 3-axis digital readout. - Modern, precision spindle bearings. - Large spindle bore of 52 mm. - Heavy-duty, hardened and ground cast iron bed. - Gearbox gears are hardened and precisely ground for extended durability. - Increased machining capacity via removable gap bed. - Safety covers in compliance with the latest standards. - Machining accuracy: roundness deviation below 0.01 mm, cylindricity deviation not exceeding 0.02 mm over 200 mm measurement; outstanding surface finish. - Equipped with mechanical foot brake for safe operation. - Optional taper turning attachment available. Technical specifications SWING OVER BED: 410 mm SWING OVER CROSS SLIDE: 255 mm SWING IN GAP: 580 mm LENGTH OF GAP: 190 mm DISTANCE BETWEEN CENTERS: 1000 mm (optionally 1500 mm) CENTER HEIGHT: 205 mm BED: Induction hardened BED WIDTH: 250 mm SPINDLE BORE DIAMETER: 52 mm SPINDLE NOSE: D1-6 SPINDLE TAPER: Morse No. 6 SPINDLE SPEED RANGE: (16) 45-1800 rpm MAX TOOL SIZE: 20 mm x 20 mm LONGITUDINAL FEED RANGE: (17) 0.05-1.7 mm/rev CROSS FEED RANGE: (17) 0.025-0.85 mm/rev METRIC THREADS: (42) 0.2-14 mm INCH THREADS: (45) 2-72 TPI MODULAR THREADS: 0.3-3.5 MP (18) DIAMETRICAL PITCH THREADS: 8-44 DP (21) TAILSTOCK SLEEVE DIAMETER: 50 mm TAILSTOCK SLEEVE TRAVEL: 120 mm TAILSTOCK SLEEVE TAPER: MT 4 DIGITAL READOUT: Full 3-axis MAIN MOTOR POWER (S1/S6): 2.2 kW / 3.3 kW COOLANT PUMP POWER: 0.1 kW DIMENSIONS: 1940 mm x 850 mm x 1320 mm GROSS WEIGHT: approx. 1590 kg Standard equipment - 3-jaw chuck, 200 mm - 4-jaw chuck, 250 mm - 3-axis digital readout - Face plate - Fixed steady rest - Travelling steady rest - Spindle reducing sleeve - Fixed center - Change gears - Coolant system - Lighting installation - Thread indicator dial - Lathe equipped with electromechanical foot brake compliant with CE standards - Chip tray - Complete set of service tools - Latest safety guards in compliance with CE standards - Complete operating manual in Polish Ihedpfeiz Tf Sox Adksw - EC/CE Declaration of Conformity - Brand new machine with full manufacturer's warranty For more information, please visit our website.

Stanje: rabljeno, Vodoravni in prečni stružnica TONGIL-SAEILO tip TIPL-4SP Stroj. št. 00570319 Leto izdelave 1985 Razdalja med konicami: 1000 mm Premer struženja nad posteljo: 400 mm Isdpfx Adox Urbvekehw Premer struženja nad suportom: 210 mm Višina konice nad posteljo: 200 mm Višina konice nad suportom: 105 mm Vrtina vretena: 58 mm Število obratov vretena: 55 - 1600 min⁻¹, 16 stopenj Pomik: vzdolžni in prečni Notranji konus konjička: MK 4 Prirobnica za vpenjalno glavo: Camlock, velikost konusa 6 Moč motorja: 4 / 6 kW Priključna napetost: 380 V, 50 Hz - Hitrost vretena preko 2 vrtilnih hitrosti motorja in 8 stopenj menjalnika - 3-čeljustna planska vpenjalna glava RÖHM Ø 200 mm s stopničastimi čeljustmi - Hitroizmenljivi nosilec orodij Multifix vel. B z 2 izmenljivima kasetama - Mehanska zavora vretena preko stopalke - Naprava za hlajenje - Nujna ustavitev - Delovna svetilka Potrebni prostor D x Š x V: 2250 x 1050 x 1220 mm Teža: 1500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 246 mm, izvrtina vretena: 54 mm, premer struženja: 400 mm, premer struženja nad ležiščem sani: 400 mm, premer struženja nad zgornjim sanežem: 267 mm, stružna dolžina: 1.250 mm, hitrost vretena (min.): 2.500 obr/min, Stružnica Colchester Triumph 2500 z izrezom v postelji Model: Triumph 2500 Ihjdpsyt Ngxofx Adksw Obodni premer nad posteljo: 400 mm Obodni premer nad prečnim suportom: 246 mm Obodni premer v izrezu: 585 mm Razdalja med konicami: 1250 mm Premer vretena: 54 mm Stroj je opremljen z: 3-čeljustno vpenjalno glavo Digitalnim merilnikom Zaščitnim pokrovom za vpenjalno glavo Nosilcem orodja za hitro menjavo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 267 mm, izvrtina vretena: 76 mm, premer struženja: 433 mm, premer struženja nad ležiščem sani: 433 mm, premer struženja nad zgornjim sanežem: 267 mm, stružna dolžina: 1.000 mm, največja hitrost vretena: 1.600 obr/min, hitrost vretena (min.): 20 obr/min, Premer struženja v izrezu: 711 mm, Stružnica z odprtino v ležišču Colchester Mascot 1600 Model: Mascot 1600 Premer vrtenja nad ležiščem: 433 mm Premer vrtenja nad zgornjim suportom: 267 mm Premer v odprtini: 711 mm Razdalja med konicami: 1000 mm Hitrosti vretena: 20–1600 vrt/min Premer vretena: 76 mm Stroj opremljen z: 3-čeljustna glava Nastavek za narezovanje navojev Ainjest Fiksna podpora Ijdoyt Nfhspfx Adkshw Hitromenjalna držala za nože Digitalni odčitek Hitrorezno narezovanje navojev

Stanje: zelo dobro (rabljeno), Prodajam na slikah viden stružnico za obdelavo kovin angleškega podjetja Harrison, model M300. Stroj je v zelo dobrem stanju. Ima novo 160 mm vpenjalno glavo znamke Fuerda. Nameščene so optične letve znamke Sino. Pri preizkusih struženja na 20 cm je bila razlika v premeru 0,04 mm. Cena ni predmet pogajanj. Iodpfx Adox Ur Amjkohw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6V0148, SPECIFIKACIJA STROJA Višina osi: 170 mm Obhod nad ležiščem: 350 mm Obhod nad prečnim suportom: 196 mm Obhod v izrezu: 535 mm Širina pred čelno ploščo: 165 mm Dolžina ležišča med konicami: 650 mm Hitrosti vretena (brezstopenjsko nastavljive): 15–3250 obr./min Pritrditev vretena: (Camlock) D1-4 Premer izvrtine vretena: 42 mm Moč motorja vretena: 7,5 kW Širina čez vodila ležišča: 318 mm Pomik prečnega suport: 250 mm Pomik zgornjega suport: 100 mm Pomik konjička: 145 mm Konus v konjičku: No. 4 MT Stroj v metrični izvedbi Ihedpfx Aewmm H Rjdkjw STROJ OPREMLJEN Z Acu-Rite 2-osni digitalni odčitni sistem (DRO) Tričeljustna vpenjalna glava Hitro izmenljiv nosilec orodja z dvema držaloma Zaščita vpenjalne glave Ščitnik za ostružke na sani Hladilni sistem Razsvetljava Zadnji ščitnik proti brizganju Opomba: Stroj prihaja iz šolskega centra Dyson in je v izjemno dobrem stanju

Stanje: novo, TC 205 x 1000 Centre height: 205 mm Swing diameter over bed: 410 mm Distance between centres: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Cross feeds X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral pitch threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock quill diameter: 52 mm Tailstock taper: MT 4 Tailstock quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control (2 mechanical speed ranges) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast-iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gearbox with a wide feed range running in an enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four tool holders - High splash guard with integrated LED trough light - Pull-out chip tray at the front - Overload clutch Ihjdpjir If Djfx Adksw - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine pads (1 set of 6 pieces) - Two emergency stop buttons - Foot pedal with dual brake system (mechanical and electrical) - Chuck guard, tool post guard and leadscrew cover with limit switch protection in accordance with European CE safety standards - Coolant system - 2 fixed centres - Reducing sleeve for main spindle - Operating tools - Operating tools in toolbox - Operating manual with spare parts list

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 430 mm, višina središča: 215 mm, stružna dolžina: 760 mm, poteza s peresom: 127 mm, premer tulec: 58 mm, skupna dolžina: 1.885 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.680 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 215 mm Ihsdsu T E Ehepfx Adkjw Centre distance: 760 mm Spindle bore: 58 mm Spindle nose: DIN 55029 Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 rpm Weight approx. 1680 kg Equipment includes: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on the sliding surfaces) of the tool and cross-slide - Manual central lubrication with one pump for longitudinal and cross-slide - Complete coolant system with rear splash guard and splash guard on the slide - Chuck guard - Control rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine mounting plates

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose per DIN 55029: Camlock D6 Motor power: 7.5 kW Ihedou T Hiuopfx Adksw Spindle speed range: 20-2000 rpm Features include: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coating (on counter surfaces) for tool and cross slides - Manual central lubrication with one pump for longitudinal and cross slides - Complete coolant system with rear splash guard and splash guard on the slide - Chuck guard - Control rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine mounting pads

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 430 mm, višina središča: 215 mm, stružna dolžina: 760 mm, poteza s peresom: 127 mm, premer tulec: 58 mm, skupna dolžina: 1.885 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.680 kg, nosilec puše: MK 4, Centre height: 215 mm Centre distance: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on counterface) of the cross and top slides Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and slide splash protection Chuck guard Control bar with 3 adjustable cams Machine lamp Fixed centre Iedpfxjcir Ano Adkjhw Set of machine mounting plates

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Chuck guard Ijdpfscirniox Adkehw Control rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: rabljeno, Leto izdelave: 2020, Condition: used Year of manufacture: 2020 Stock number: 1658 Delivery time: immediate, subject to prior sale Country of origin: Bulgaria Price: €26,500 In stock: 1 unit Special price: €22,600 Swing over bed: 400 mm Centre distance: 1,000 mm Centre height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN55027: Size 6 Spindle taper: 6 Morse Number of spindle speeds: 12 Spindle speed range: 50-2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015 – 0.6 mm/rev Cross feed: 0.0075 – 0.3 mm/rev Number of threads: 40 Metric thread range: 0.25 – 7.5 mm Inch thread range: 120 – 4 TPI Module thread range: 0.0625 – 1.875 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: 4 Morse Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2,750 mm Width: 1,100 mm Height: 1,600 mm Weight: 1,540 kg This machine is currently in use in our workshop for repair work and has therefore seen very little use so far (original price €36,070.00). Drive via geared transmission 3-axis digital readout Fagor 40i Multifix quick-change tool post type B with 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 DIN 55027 Rapid traverses (4) Fixed centre Coolant system 1 piece flange plate for lathe chuck Ø 200 mm 1 adapter sleeve Rear chip splash guard over full length Leadscrew and feed shaft cover Chuck guard Ihedpfswirdtox Adkow Tool holder guard Levelling bolts and pads Tailstock with quick clamp Low-voltage machine lamp Operating instructions and machine labels in GERMAN CE conform equipment

Leto izdelave: 1961, stanje: rabljeno, Centre height 235 mm Turning diameter 470 mm Spindle speed 2700 rpm Turning length 1500 mm Iedpfx Adol Ab Htskshw Incl. accessories

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 80 mm, premer struženja: 400 mm, višina središča: 220 mm, stružna dolžina: 1.500 mm, poteza s peresom: 230 mm, premer tulec: 90 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 25 obr/min, premer nihanja nad prečnim premičnikom: 240 mm, širina postelje: 400 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe designed for precise and efficient machining operations. With its robust construction, high drive power, and comprehensive standard equipment, the machine is ideally suited for continuous industrial use. Technical Data • Centre height: 220 mm • Swing over bed: 400 mm • Swing over cross slide: 240 mm • Distance between centres: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centres: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting Ihedoyhzgqspfx Adksw • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal/cross: 3,800 / 1,900 mm/min • Metric, inch, module, and DP threads without gear change Slide • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) • Frequency-controlled main drive • Quick-change tool post Multifix size C • Centralized lubrication for slide, headstock, and feed gearbox • Coolant system • Interlocked chuck guard • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color RAL 7035 / RAL 7011 Options • Digital position indicator FAGOR INNOVA 30iT

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 560 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Razdalja med konicami: 1600 mm Izvrtina glavnega vretena: 65 mm Območje vrtljajev: 9...1800 / 24 stopenj min⁻¹ Vzdolžni pomik: 0,025-0,09 mm/obrat Prečni pomik: 0,012-0,045 mm/obrat Pomik pinole konjička: 225 mm Ihedpfxewa I Shj Adkjw Priključek konjička: MK5 Skupna priključna moč: 18 kW Teža stroja pribl.: 3,8 t Mere stroja (DxŠxV): 3,7 x 1,6 x 2,05 m Trivpenjalni vpenjalni tulec D=320 mm Zgornji suport vrtljiv ±45°

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Iodeu Ix D Aepfx Adkehw Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: rabljeno, Leto izdelave: 1951, Technical Details: Swing over bed: 400 mm Swing over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions (LxWxH): 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been rewired and fitted with a new control cabinet. Emergency stop switch and chuck guard 3-jaw chuck, Ø 250 mm Isdpfx Adju Ix Hdjkehw Live centre Toolpost: four-way toolholder Compound slide swivels approx. 30° to the right/left Taper turning attachment (taper 15° right/left) 4 change gears included