CNC stružno-rezalni centri nakup rabljenega (625)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 61.440 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06800003891, Oprema: dokumentacija / priročnik, Ponujamo to pripravljeno DMG GILDEMEISTER CTV 250 CNC stružno-rezkalno središče, letnik 2008. Ijdpfx Asyt Dudedkohw Proizvajalec: DMG GILDEMEISTER Model: CTV 250 Letnik: 2008 Stanje: pripravljeno za uporabo Tip stroja: CNC stružno-rezkalno središče Delovne ure: Vklop: pribl. 76.300h / Delovanje vretena: pribl. 61.440h V prodaji so vključene naslednje komponente: - vključno s paletnim obtok sistemom - vključno s transportnimi trakovi za obdelane dele - transportni trak za ostružke Redno vzdrževanje je bilo opravljeno, dokumentacija je na voljo. Za dodatne informacije ali vprašanja nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 630 mm, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 935 mm, največja hitrost vrtenja: 10.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Technical Data Okuma Multus B300-W with Y-axis and Bar Loader Year of Manufacture: 2010 Machine Configuration: - Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) - Tool Spindle: 10,000 rpm with HSK-A63 - Air blast through spindle center - Tool Magazine: 60 positions - Workpiece catcher - Renishaw 3D probe RMP60 incl. preparation for in-process measurement - Chip conveyor: Hinged belt, Interlit - High-pressure pump: Brinkmann TM26/180 - Prepared for oil mist extraction - Short bar loader: SAMSYS Multi-3000LR 1240/65 Main Spindle: - BigBore with spindle nose A8 – Speed: 38–3,800 rpm - Extension kit A8 for through-hole clamping; max. bar diameter 65 mm - SMW collet chuck, axial pull – Hainbuch Spanntop system Sub-Spindle: - Max. speed: 5,000 rpm with spindle nose A6 - Extension kit A6 for through-hole clamping - Workpiece ejector for sub-spindle, diameter 52 mm Working Area: - Swing diameter up to max. 630 mm - Swing diameter over cross slide/bed: 630 mm - X-axis travel: 580 mm – rapid traverse 40 m/min - Z-axis travel: 935 mm – rapid traverse 40 m/min - Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min - W-axis travel: 1,000 mm – rapid traverse 20 m/min - B-axis is incremental at 0.001 degrees Iedeyiayxspfx Adkohw Weight: Approx. 10,300 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 64.297 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2SAY0351, stružna dolžina: 350 mm, premer struženja: 114 mm, potovalna razdalja osi X: 100 mm, pomik po osi Z: 320 mm, model krmilnika: FANUC SERIES 18i-TB, Bez minimalnej ceny – sprzedaż gwarantowana dla najwyższej oferty! Złożenie oferty zobowiązuje do terminowego odbioru w jednym z terminów: między 11.05.2026 a 13.05.2026 lub między 18.05.2026 a 21.05.2026! DANE TECHNICZNE Długość toczenia: 350 mm Średnica toczenia: 114 mm Prędkość obrotowa wrzeciona (max.): 8 000 obr./min Przelot przez wrzeciono: 25,4 mm Odległość między kłami: 445 mm Odległość między osiami wrzeciona: 485 mm Przesuw osi X: 100 mm Przesuw osi Z: 320 mm Prędkość szybkiego przesuwu osi X: 20 m/min Prędkość szybkiego przesuwu osi Y: 10 m/min Prędkość szybkiego przesuwu osi Z: 30 m/min Moment obrotowy: 30 Nm Średnica obrotu nad prowadnicami: 325 mm DANE MASZYNY Sterowanie: FANUC SERIES 18i-TB Wymiary i ciężar Wymiary (dł. x szer. x wys.): 2 500 x 2 000 x 2 100 mm Waga całkowita: 2 500 kg Producent sterowania: FANUC Iodpeyn Nuxsfx Adkjhw Napięcie zasilania: 3 x 400 V Częstotliwość: 50/60 Hz Prąd znamionowy: 26 A Przebieg (wg wyświetlacza): 64 297 h WYPOSAŻENIE Konik Wrzeciono główne Rewolwer narzędziowy (12 pozycji) Narzędzia napędzane (6 szt.) Oś Y

Stanje: rabljeno, Leto izdelave: 1998, • CNC obdelovalni center Emco, tip VMC 600, letnik 1998 Ihodpfx Adoyucbfjkjw • Vključuje ročni kolesnik in 3 primeže z vpenjalnimi pripomočki

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, CNC obdelovalni center DMG DECKEL MAHO DMF 260-11 s pomičnim stebrom (travelling column), primeren za obdelavo velikih in težkih kosov v energetiki, strojništvu ali avtomobilski industriji. Stroj je opremljen z modernim upravljalnim panelom DMG ERGOline in robustno konstrukcijo za visoko natančnost in stabilnost pri obdelavi. Tehnične specifikacije Pomiki osi X: 2600 mm Y: 1100 mm Z: 900 mm Miza velikost mize: 3200 × 1100 mm maks. obremenitev mize: cca 4000 kg Vreteno maks. obrati: 10.000 vrt/min konus: SK40 / SK50 (odvisno od konfiguracije) Krmilni sistem Siemens / Heidenhain (ERGOLINE panel) Magazin za orodja Ihjdpfoyrrcyox Adkew do 60 pozicij Teža stroja cca 25.800 kg Napajanje 400 V / 50 Hz priključna moč cca 77 kVA (po tablici) Oprema popolnoma zaprta delovna kabina avtomatski zalogovnik orodij hladilni sistem otopni transporter upravljaški panel DMG ERGOline papirna filtracija hladilne tekočine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, CNC stružnica s protivretencem, 2 revolverji s pogonskimi orodji, zgornji revolver Y-osni pomik 50 mm – leto izdelave (možna popravila, generalka): 2005, zamenjava krogličnega navojnega vretena osi X na zgornjem revolverju leta 2011, menjava vpenjalnega valja – vreteno št. 1 – približno 2018, menjava ležajev na obeh vretencih – 2011, sprotna obnova obeh revolverjev. Tehnični podatki: Obodni premer nad posteljo: 700 mm Največji stružni premer: 520 mm Razdalja med čeli obeh vretenc: 1500 mm Pomik protivretenca: 1100 mm CNC stružnica Emco Hyperturn_690MC TCMY plus s protivretencem, 2 revolverja s pogonskimi orodji, zgornji revolver začetek Y-osi 50 mm. Krmilni sistem: Siemens Sinumerik 840D. Oprema: Pogonska orodja – 2 ravni + 2 kotna Nosilci: 2 v izvrtini + 2 na površini Čeljusti: 2x trde osnovne čeljusti. Popolna dokumentacija za stroj Rezervni revolver – po popolni obnovi. Ihodpfxsyrqnuo Adkow

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, CNC stružnica DMG MORI ecoTurn 450 Z upravljanjem Siemens 840 D SLIMline Letnik izdelave: 2016 Maks. struženi premer: 315 mm Medosna razdalja: 685 mm Pomik X: 224 mm Iodpfx Adeyn Np Nokehw Pomik Z: 600 mm Vretenova odprtina: 91 mm Maks. hitrost vretena: 4000 vrt/min Z naslednjo opremo: Drsna zaščita z notranjo osvetlitvijo 12-pozicijski revolver z 12 pogonskimi postajami C-os, Y-os +/- 50 mm 5 kosov pogonjenih orodij VDI 40 60 kosov držal orodij VDI 40 Hidravlična vpenjalna glava HAINBUCH s stopalko Merilna naprava za orodja v delovnem prostoru Prevzemna naprava za obdelovance Konjiček s pinolo 4-barvna signalna luč Transporter za ostružke Izpiralna pištola Sistem za hlajenje z ojačano črpalko 20 bar Navodila za uporabo

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Paquet de machines Emco à vendre ! À vendre : 2 tours en lot, incluant TOUS les porte-outils et systèmes de serrage ! 1 x Emco 665 MC Plus avec contre-broche et 2 tourelles, année 2006, incluant FMB Turbo 8-80 (aléseuse de 4 mètres), année 2006 1 x Emco 332 Big Bore avec contre-broche et 2 tourelles, année 2001, incluant FMB 5-55 Turbo (aléseuse de 3 mètres), année 2016 Les deux machines sont en service chaque jour et peuvent être inspectées sous tension. Les machines étaient utilisées en poste unique. Iodpjyifnhjfx Adkjhw Comme nous nous séparons de ces deux tours dans le cadre d’un changement de système, le lot comprend une grande quantité de porte-outils, de systèmes de serrage (pour toutes les machines) et de systèmes d’avance pour les deux aléseuses, qu’il n’est pas possible d’énumérer individuellement tant ils sont nombreux ! Le démontage et le chargement des machines sur les camions du client peuvent être organisés moyennant un petit supplément !

Stanje: rabljeno, Leto izdelave: 2016, Okuma MULTUS B300II Drehmaschine mit Okuma OSP-P300S-H Steuerung, Y-Achsen-Verfahrweg 160 mm, 60-fach Werkzeugmagazin / Vorbereitung für Hochdruckkühlung: 70 bar / externe Kühlmittelpumpe: 0,8 kW, 6 bar, 20 l/min / Elektrische Spindelorientierung / Luftdüse zur Spannfutter-Reinigung, Kollisionsvermeidungssystem (CAS) / Vorbereitung Späneförderer / Großbohrungsspindel ASA 6": 22/15 kW, 3.800 U/min / Hochpräzise C-Achsen-Positionierung / Durchgehende B-Achse / Werkzeugmagazin mit 60 Plätzen / 0,1 Mikron Auflösung Software / API Library 2 für OSP-P300S / Standard Späneförderer rechts / 15-bar Kühlmittelpumpe, 20 l/min / Filtereinheit mit 4 Gewebefilterbeuteln (25 Mikron), Pumpe 15 bar, 20 l/min, SCHUNK ROTA THW+260-81R A8 Spannfutter mit KITAGAWA SS1770 Zylinder für Großbohrung Hauptspindel, SCHUNK ROTA THW+215-66 A6 Spannfutter mit KITAGAWA SS1452 Zylinder für Gegenspindel, Y-Achsen-Bearbeitungspaket: Helikalinterpolation / Y-Achsen-Drehen mit abgesetztem Werkzeughalter / Koordinatenumrechnung / Doppel-Druckspannsystem für Hauptspindelfutter über M-Codes (irreversibel) / Doppel-Druckspannsystem für Gegenspindel über M-Codes (irreversibel), 5-Achsen-Bearbeitungspaket: Super NURBS auf 5 Achsen / Vektorregelung / DNC-DT-Schnittstelle / Werkzeugpositionskontrolle / 3D-Koordinatentransformation / Helikalinterpolation (inkl. Schrägbahnenprofil-Software), Haupt- und Gegenspindel: ASA 8, 15 kW, 5.000 U/min, 651 mm Stangendurchlass / max. Drehdurchmesser: ⌀630 mm / Umlauf und Abstand zwischen Spindelnasen: 1.290 mm / B-Achse: kontinuierlich, Indexierung 0,001°, HSK63, 11 kW, 6.000 U/min / Frässpindel HSK A63: 10.000 U/min, 16/11 kW. Ursprungsland: Japan Iedpfx Adoyrdvlokshw Verladung auf ein geeignetes Fahrzeug ist kostenlos. Maschine steht aus verkaufsbedingten Gründen demontiert in Brescia, Italien.

Stanje: dober (rabljeno), Leto izdelave: 2008, Opis: Iodsyq Il Ispfx Adkjhw Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen preizkus. Prehod vretena 65 mm. 38444 delovnih ur, vreteno približno 1/3 delovnih ur stroja. Da, gre za sistem Sinumerik. Vpenjalna glava SCHUNK ROTA THW plus 215-65.

Stanje: dober (rabljeno), Leto izdelave: 2011, Opis: Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen preizkus. D maks. 65 mm, L maks. 590 mm, ŠTEVILO ORODIJ: 12. 50,44 kVA. Parametri stroja: Dimenzije stroja d x š x v: D maks. 65 mm, L maks. 590 mm. Ihedpfx Asyq Ifzsdkow

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Parametri stroja: Dimenzije stroja d x š x v: D maks. 51 mm, L-maks. 120 mm Opis: Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru možnost preizkusa. 54,7 kVA Število orodij 12 Isdpfxoyq Iaxe Adkjhw

Stanje: rabljeno, Leto izdelave: 2004, Stroj Leto izdelave Podajalnik Dodatne informacije Ure Twin 42 2004 Irco Breuning SIMAG Hidravlična cev poškodovana na revolverju 1 ali 2 79593 25020 Twin 42 2004 Irco Breuning SIMAG Dina modul odstranjen, tlačni vpenjalec (javi, da vpenjalna čeljust ni zaprta) 69573 9625 Twin 42 2004 Irco Breuning SIMAG Stroj deluje in je v proizvodnji 72402 8375 Twin 42 2004 Irco Breuning SIMAG Glavno vreteno okvarjeno z okvaro ležaja, spenjač HS okvarjen, LT modul manjka, Dina modul manjka Twin 42 2008 Irco Breuning SIMAG Stroj deluje in je v proizvodnji 5104 83790 Ihjdpfxeytnywe Adkjw Twin 42 2008 Irco Breuning ECO Profi večkanalni menjalnik Stroj deluje in je v proizvodnji 99825 76595

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, proizvajalec krmilnikov: SIEMENS, This 6-axis DMG MORI Beta 1250 TC was manufactured in 2014. It features a maximum workpiece length of 1,200 mm and a bar capacity of 102 mm. The machine offers a B-axis swivel range of ±110° for increased flexibility and comes equipped with a tool magazine that can hold up to 24 tools. If you are looking for high-quality turning and milling capabilities, consider the DMG MORI Beta 1250 TC turn-mill center we have for sale. Contact us for further details. Ihedpfx Aoyniu Eodkew • Max. workpiece length: 1,200 mm • Max. bar diameter: 102 mm • Y-axis travel for external machining: ±120 mm • B-axis swivel range: ±110° for maximum flexibility • Tool magazine available as disc or chain type for reduced setup and downtime • Standard disc magazine for 24 tools • Optional chain magazine with 48 or 80 stations • Tools up to 400 mm in length and 120 mm diameter • Six-sided complete machining via main spindle with up to 700 Nm and optional sub-spindle • Integrated spindle drives with up to 700 Nm for maximum cutting performance • Optional sub-spindles up to 360 Nm and 65 mm bar capacity • Micron-range precision • Positioning accuracy up to

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm Ijdpfx Aeym T Itsdkshw • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 92.000 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret with 12 stations and live tooling on both turret 1 and 2. If you are looking for high-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we are offering for sale. Please contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Coolant flushing of the sub-spindle (electrically actuated shut-off valve) • Foot switch • Turret (12 stations), top and bottom • Live tooling on turret 1 and 2 • "Synchronous tailstock" control function for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection for slides 1 and 2 with solenoid valve • Coolant spray gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional Equipment Iedpfxoylw Dcj Adkjhw • Gantry unloading device with actuated gripper, NC controlled • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • KNOLL vacuum rotary filter (emulsion version) • High-pressure pump 80 bar • Workpiece holding: • Collet chuck for draw tube, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large assortment of driven tool holders and spare parts inventory

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, moč vretenovega motorja: 26.000 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 630 mm, pomik po osi Z: 1.585 mm, skupna višina: 3.025 mm, skupna širina: 2.360 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-F with 15" display, največja dolžina izdelka: 5.125 mm, število osi: 7, This 7-axis DN SOLUTIONS PUMA MX2600ST was manufactured in 2023. As-new condition, showroom model. It features a maximum spindle speed of 4,000 rpm and a bar capacity of 76 mm. The machine is equipped with a multi-tasking configuration, comprising three spindles and a lower turret with 12 stations. If you are looking for a high-quality mill-turn center, consider the DN SOLUTIONS PUMA MX2600ST mill-turn center we have for sale. Contact us for further details. • As-new, showroom model • Configuration: Multi-tasking with 3 spindles and lower turret • Chuck size: 10" (255 mm) • Bar capacity: 76 mm • Travel ranges: Iedpsyrtc Ujfx Adkehw • X1 / X2: 630 / 230 mm • Z: 1,585 mm • Number of axes: 7 (fully controlled) • X1 / Z1 / Y1: milling spindle axes • B axis: milling spindle swiveling/tilting (approx. 240° range) • X2 / Z2: lower turret axes • C axis: spindle indexing/rotation • Spindle motor power: 26 / 22 kW • Spindle architecture: 3 spindles, including top-mounted milling spindle • Lower turret: 12 stations, BMT 65 interface • Tool interface: CAPTO C6 (milling head) • Guideway type: linear guideways • Precision: 0.001° indexing accuracy on B and C axes • Thermal control: intelligent thermal compensation and optimized cooling to minimize thermal displacement • Cooling system: coolant flush for right/left spindle; high-pressure coolant through lower turret and milling spindle • Filtration/monitoring: level monitoring; flow monitor • Data/software: AICC machining; data server 1 GB Additional equipment • Renishaw RMP60 probe • Tool presetter • Automatic door (automation) • Oil skimmer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, moč vretenovega motorja: 3.700 W, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 142 mm, pomik po osi Z: 250 mm, skupna višina: 1.720 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 18iT, This 4-axis lathe MIYANO BNJ 42S was manufactured in 2004 and is equipped with two turrets and a Fanuc 18iT control for precision turning operations. It features a bar capacity of 42 mm and spindle speeds up to 5,000 rpm. Fitted with an LNS Hydrobar MiniSprint bar feeder and standard fixed as well as powered tool holders, this machine optimizes productivity. Consider the MIYANO BNJ 42S machine we are offering for sale. For further information about this lathe, please contact us. Additional equipment - Bar feeder: LNS Hydrobar MiniSprint - Tool holders: Standard fixed and 2 powered tool holders Machine benefits Qualitative machine advantages Ihjdpfxjx D Eh Ss Adkow - High spindle speed range, reliable Fanuc control Technical machine advantages - Fixed headstock lathe with 2 turrets, powered tool turret Additional information Machine still under power Dimensions Machine depth: 1,450 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, moč vretenovega motorja: 15.000 W, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 135 mm, pomik osi Y: 30 mm, pomik po osi Z: 230 mm, skupna višina: 2.070 mm, skupna širina: 2.300 mm, proizvajalec krmilnikov: FANUC, največja dolžina izdelka: 3.510 mm, število osi: 8, This 8-axis DN SOLUTIONS PUMA TT1300SYYB turning and milling center was manufactured in 2019. It is a showroom model in mint condition. The machine features a twin-spindle, twin-turret configuration, enabling independent simultaneous operations. With a maximum spindle speed of 6,000 rpm and integrated high-speed C-axis and Y-axis, it offers advanced capabilities for complex machining tasks. If you are looking for high-quality turning solutions, consider the DN SOLUTIONS PUMA TT1300SYYB machine we offer for sale. Please contact us for further details. • Configuration: Twin spindle / twin turret (independent operation) • Chuck size: 6" (170 mm) • Bar capacity: 51 mm • Axis travel: X1/X2 135/80 mm; Z1/Z2 530/530 mm; Y-axis 30/40 mm • Spindle motor power: 15 / 11 / 7.5 kW Ihjdjyrr Suspfx Adkow • Turret stations: 12 / 12 (BMT 45) • Guideways: Roller guideways • Features: Integrated high-speed C-axis and Y-axis for complex machining Additional equipment • High-pressure coolant through the turret • Oil skimmer • Coolant supply through the right/sub-spindle • Parts ejector (sub spindle) • Parts catcher at main spindle with collection bin • Parts removal conveyor for sub spindle • Automatic electric tool presetter • Automatic shut-down • Interface for bar feeder (bar feeder not included) • 3-color status signal tower Additional information Showroom model in mint condition Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: 640M Nexus, število osi: 4, Ta 4-osni Mazak NEXUS HCN 6000 je bila izdelana leta 2006. Opremljena je z Mazatrol 640M Nexus krmiljem, 800 mm pomika v oseh X, Y in Z ter rotacijo B-osi za 360°. Hitrost vretena dosega do 10.000 vrt/min, orodjarna pa ima 120 mest. Miza prenese obremenitev do 1.000 kg. Preverite možnost nakupa tega Mazak NEXUS HCN 6000 stružno-rezkalnega centra. Za več informacij nas kontaktirajte. • Rotacija B-osi: 360° • Velikost mize: 500 x 500 mm • Dovoljena obremenitev: 1.000 kg • Orodjarnik: 120 pozicij • Visokotlačno hlajenje: 70 barov Dodatna oprema Ihjdpfx Adeygl Nceksw • Odsesavanje ostružkov (transportni trak za ostružke) Tehnične specifikacije Konus ISO 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 12.125 h, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840D, število osi: 6, This 6-axis EMCO Hyperturn 665MC Plus turning-milling center was manufactured in 2008. It features a multi-axis CNC system with a Y-axis and B-axis, enabling complete machining of turning and milling components. Equipped with integrated spindle motors on both the main and counter spindles, it offers a spindle speed of up to 5,000 rpm for the main spindle and 7,000 rpm for the counter spindle. The machine includes a 24-position tool magazine and is controlled via a SINUMERIK 840D system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 665MC Plus, which we offer for sale. Please contact us for further information about this machine. Additional Equipment • Tool turret: 12-position radial VDI 30 tool turret with directional logic for up to 12 driven tool stations • B-PowerMill: Motorized milling spindle with a 24-pocket tool magazine, 210° swivel range • Optional tool package: Includes static and driven tool holders, collet holders, reduction sleeves, and actuating clamps • Hollow clamping cylinder with draw tube / part ejector and coolant flushing through the counter spindle / finished part catcher • Finished part collection device / coolant system integrated in the chip conveyor / high-pressure pump (14 bar) and fine filter Ihsdpfx Ajx D Hwnjdkow • Flush pumps (3.7 bar) / electrical cabinet air conditioning / electrostatic oil mist separator • Hydraulic unit / machine lamp / foot switch interface / signal lamp • Documentation with electronic handwheel, PC keyboard, network readiness, tool monitoring, process window, cleaning pistol • Main spindle clamping system: Hainbuch BZI 80 pull-to-center Machine Advantages Technical Machine Benefits • Counter spindle: 22 kW / Counter spindle: 0–7,000 rpm • Main spindle: kk 6 (bar capacity 65 mm) / Counter spindle: kk 6 • Y-axis travel: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck, 210 mm • Approx. 40 Capto C4 tool holders for milling spindle • Loader lm 1200 • The machine does not have ShopTurn programming. It must be programmed with ISO code, with simple cycles available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 48.973 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 D, število osi: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It is equipped with a Siemens 840 D control system, a sub-spindle, and a bar feeder package for enhanced versatility. The machine features a 980-liter coolant system and a hinged belt conveyor for efficient operation. If you are seeking high-quality turning and milling machines, you should consider the DMG MORI CTX Beta 800 4a that we are offering for sale. Please contact us for additional details regarding this machine. Ijdpfx Adjx D Nd Dokohw • 2 x 16-position Sauter star VID 30 turrets • Siemens 840 D • Eccentric turning and milling operations • TC variable spindle speed • Sub-spindle • Glass scales for Y1, Z1, Z2, Z3, X1, X2, X3 axes Additional Equipment: • 980-liter coolant tank with 8 bar/20 L and 20 bar/40 L, programmed via M-function • Paper band filter • Chuck flushing system for main spindle external • Chuck flushing system for sub-spindle external • Coolant spray gun • Hinged belt conveyor • Bar feeder package • Window cleaning with compressed air • SK package for aluminum machining • Artis CTM tool breakage monitoring

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm Ihedpfxjx D Iuzs Adkew • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 18.504 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 550 mm, pomik osi Y: 110 mm, skupna masa: 20.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D Powerline, število osi: 7, This 7-axis DMG Gildemeister GMX 400 Linear was manufactured in 2004 and features a maximum turning diameter of 640 mm with a turning length of 1,585 mm. The machine is equipped with a Sinumerik 840D Powerline control system, a milling spindle with a maximum speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking for a high-quality turn-mill center, you should consider the DMG Gildemeister GMX 400 Linear machine we are offering for sale. Contact us for further information. Additional Equipment • Oil mist extraction system • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Machine Advantages Technical Machine Advantages Ihodox D S Dgjpfx Adkew • Main spindle drive power: max. torque 600 Nm • B-axis: +/- 120° • C-axis resolution: 0.001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1,585 mm • Standard turning diameter: 400 mm • Distance between centers (main spindle): max. bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm DIN 69880 Additional Information Machine still under power

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 80 mm, pomik po osi Z: 935 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P200L, število osi: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and a tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality turning machine, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions Iodpfx Aox D Rvhjdkohw • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Bar loader IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets