Avtomatski vzdolžni stružni stroji nakup rabljenega (235)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Iodpfx Ajwg Takodksap Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Ijdpfx Adswi Ty Aokeap Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Electrical Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery No guarantee is given regarding the accuracy, completeness, or currency of the information provided.

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), STAR ECAS 32 T CNC Automatic Lathe - Very good condition - Extensive range of accessories included Iedpfx Ajl R Ix Sodksap - Detailed photo series available in the PDF catalogue TECHNICAL DATA Max. machining diameter: 32 mm Max. headstock stroke: 350 mm Tool post: First turret: 10 stations Second turret: 10 stations Number of turning tools: Max. 2 tools per station Tool shank: 16 mm Sleeve holder: Number of tools: Max. 3 tools per station Max. drilling capacity: 23 mm Max. tapping capacity: M12 x P1.75 Max. die cutting capacity: M12 x P1.75 Driven tool attachment: Number of tools: Max. 2 tools per 1 station Max. drilling capacity: 10 mm Max. tapping capacity: M8 x P1.25 Max. milling capacity: 12 mm Max. slotting capacity: 2 mm x 10 mm Main spindle min. indexing degree: 0.01° Main spindle speed: 7,000 rpm Driven tool spindle speed: 5,700 rpm Coolant tank capacity: 230 l Dimensions: 3,175 x 1,745 x 1,860 mm Centre height: 1,084 mm Weight: 5,700 kg Power consumption: 8.0 kVA No guarantee is given for the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm Iaedet E Dbyspfx Adkjp SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, STAR SH-12 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - STAR SH-12 CNC automatic lathe - Bar feeder - Coolant pump - Transformer Iaedpovllmhefx Adkop For the exact scope of supply, please refer to the photos. We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2005, CITIZEN K12 CNC Lathe Automatic TECHNICAL SPECIFICATIONS Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extraction length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15,000 rpm Max. machining diameter of sub spindle: 12 mm Max. machining length of sub spindle: 40 mm Max. drilling diameter for back machining: 6 mm Max. thread diameter for back machining: M5 Sub spindle speed: 10,000 rpm Tool turret, number of tools: 8 Speed of driven tools: 6,000 rpm X1-axis: 122 mm Z1-axis: 200 mm Z2-axis: 150 mm Weight: 1,950 kg SCOPE OF DELIVERY Includes (list not exhaustive): Citizen K12 CNC automatic lathe Chip tray Transformer Complete operating documentation Exact scope of delivery as per photo documentation Iedpfxovrz H Rj Adksap We do not accept any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), STAR SV-32 CNC Sliding Headstock Lathe TECHNICAL DATA Main Spindle, Bar Capacity: 32 mm Travel: 310 mm Spindle Speed: 7,000 rpm Spindle Drive Power: 7.5 kW Minimum Increment, C-Axis: 0.01° Sub Spindle, Bar Capacity: 32 mm Spindle Speed: 7,000 rpm Spindle Drive Power: 7.5 kW C-Axis Resolution: 0.01° Turret: Number of Tool Stations: 10 of which driven: 10 Speed of Driven Tools: 5,700 rpm Driven Tools, Power: 2.8 kW Tool Holder: Number of Tools: 4 of which driven: 3 Speed of Driven Tools: 6,000 rpm Weight and Dimensions: Weight: 3,800 kg Dimensions: 2,700 x 1,400 x 2,400 mm SCOPE OF SUPPLY Includes (not limited to): CNC Control: Fanuc Fire Suppression System: Siemens Isdpfxou Uicyj Adkoap Oil Mist Separator: Donaldson Transformer High-Pressure Pump Parts Conveyor Chip Conveyor Precise scope of delivery as per photo documentation. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: dober (rabljeno), TECHNICAL DATA AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 Iaedpsu Uic Tjfx Adksp MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for forward ejection: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF DELIVERY Includes (not exhaustive): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of delivery as per photos We do not guarantee the correctness, completeness or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Axis Data Rapid Traverse: X, Y, Z, ZB, XB: 35,000 mm/min C: 198,000 °/min (550 rpm) Maximum Feed Rate: X, Y, Z, ZB, XB: 10,000 mm/min C: 10,000 °/min (27.8 rpm) Smallest Input Unit: X, Y, XB: 0.001 mm / 0.0001 in (diameter) Z, ZB: 0.001 mm / 0.0001 in C: 0.001° Machining Capacity Maximum Machining Diameter: Ø16 mm (5/8 in) Maximum Headstock Stroke: Fixed Guide Bushing: 205 mm (8 in) Rotary Guide Bushing: 155 mm (6–3/32 in) Rotary Magic Guide Bushing: 155 mm (6–3/32 in) Maximum Drilling Capacity: Driven Tool: Ø6 mm (15/64 in), Ø4 mm (5/32 in) Maximum Tapping Capacity: Driven Tool: M5×P0.8, M3×P0.5 Maximum Milling Capacity: Ø10 mm (25/64 in), Ø7 mm (9/32 in) Maximum Thread Cutting: M8×P1.25 Machine Configuration Mode of Operation: Machining station right Configuration: Integrated mechanical/electrical construction Dimensions (L×W×H): 1861 × 1060 × 1750 mm Spindle Height: 1060 mm Weight: approx. 1700 kg Main Spindle Spindle Speed: max. 10,000 rpm Speed Control: S-command + direct 5-digit command Main Spindle Drive: 2.2 kW (continuous duty) 3.7 kW (15 min/60% DC) Indexing: 15°, 1° Tool Combinations Various combinations with 1–3 spindles for tools Ø12 mm, Ø10 mm or Ø6 mm Tool holders for ER11 or ER16 Drill Holder Number of Tools: 4 Max. Speed: 5,000 rpm (ER16), 7,500 rpm (ER11) Drive Motor: 0.4 kW Tool Selection: Servo motor Backworking Max. Chuck Diameter: Ø16 mm (5/8 in) Max. Part Length: 80 mm Max. Rear Spindle Travel: 30 mm Max. Parts Ejection Length: 50 mm Spindle Speed: max. 8,000 rpm Spindle Drive: 100 W AC servo motor Tools: 4-spindle unit Max. Drilling Capacity: Ø8 mm (5/16 in) Max. Tapping Capacity: M6 × P1.0 SCOPE OF SUPPLY Includes (not an exhaustive list): - STAR SB-16D CNC Swiss-Type Automatic Lathe - Fire extinguishing system - Coolant tray - LNS Tryton-112 bar feeder - High-pressure pump Iaedpfx Adswvap Rjksp - Machine accessories - Bar feeder accessories Complete operating documentation Exact scope of delivery according to photo documentation

Stanje: dober (rabljeno), STAR SV-20 CNC Automatic Lathe TECHNICAL DATA OF CONTROL AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for front ejection: 150 mm Max. part release length: 75 mm Sub spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Ijdjiq Dp Nepfx Adksap Dimensions: 2,670 x 1,375 x 1,650 mm Weight: 3,400 kg No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, STAR ECAS-32T CNC Lathe TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Travel: 350 mm Tool Post: Isdpfou Hkg Tjx Adkeap First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools per station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools per station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 x P1.75 Max. Die Cutting Capacity: M12 x P1.75 Power Driven Attachment: Number of Tools: Max. 2 tools per single station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 x P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm x 10 mm Main Spindle Min. Indexing Angle: 0.01° Main Spindle Speed: 7,000 rpm Power Driven Attachment Spindle Speed: 5,700 rpm Coolant Tank Capacity: 230 l Dimensions (L x W x H): 3,175 x 1,745 x 1,860 mm Center Height: 1,084 mm Weight: 5,700 kg Power Consumption: 8.0 KVA SCOPE OF SUPPLY Includes (not an exhaustive list): - STAR ECAS 32 CNC automatic lathe - Barloader - Siemens fire suppression system - Toolholder set - Chip tray and coolant pump - High-pressure pump - Transformer Exact scope of supply according to photo documentation. We do not assume any liability for the correctness, completeness, or up-to-dateness of the information provided.

Stanje: zelo dobro (rabljeno), STAR SR-20R Swiss-Type Automatic Lathe TECHNICAL DATA Spindle bore: 20 mm Turning length: 205 mm Spindle speed range: 500 – 12,000 rpm Spindle motor power: 2.2 / 3.7 kW X-axis travel: 265 mm Counter spindle speed range: 500 – 8,000 rpm Counter spindle motor power: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: linear tool holders, front tool post, backwork machining SCOPE OF SUPPLY Ijdpfju Hkh Rjx Adksap Includes (but is not limited to): - STAR SR-20R Swiss-type automatic lathe - LNS bar feeder - Transformer - Coolant pan - Exact scope of delivery as per photo documentation We do not assume liability for the accuracy, completeness, or timeliness of the information provided.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Dimensions: Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor loading: Approx. 8 daN/cm² Axes Iajdpfx Aemdn Imjdkep 1 movable headstock: Z1, S1 2 independent linear tool systems on vertical slides: X1 / Y1 (S6) – X2 / Y2, S2 1 front tooling unit, 4 spindles: X3 / Z3 1 independent pickup spindle: Y4 / Z4, S4 1 independent tool system for rear machining: X4 (S5) General Data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Maximum workpiece length: With rotating guide bushing: 180 mm Operation in collet: 30 mm Main spindle speed: 12,000 rpm Spindle rotation direction: Preferably: right-hand Main spindle motorization: Continuous duty: 2.2 kW Intermittent duty: 3.7 kW Pickup spindle motorization: Continuous duty: 1.5 kW / Intermittent: 2.2 kW Headstock collet type: F20 Guide bushings: Rotating, fixed Guide bushing collet type: Meister: 605 Number of tools for main operation: Fixed: 2 x 5 / Driven: 3 + 3 Number of front tools: Fixed: 4 / Driven: 3 Tool cross-section: 12 x 12 mm Tool collets: Rotating standard: ESX 20 Number of tools in rear machining: Fixed: 3 + 3 / Driven possible: 3 + 3 Bar loader: Yes Parts removal: Basic version Machine type: Sliding headstock Machine axis height: 1100 mm Headstock travel: 255 mm Barloader position: Right of operator Bar capacity: 1–16 mm Telescopic tube bore: 6–17 mm Spindle speed: Left / right: -12,000 to 12,000 rpm Headstock feed rate: Max. 20 m/min No liability is accepted for the correctness, completeness, or up-to-dateness of this information.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, prehod palice: 32 mm, model krmilnika: Traub TX8i-S, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer prehoda palice: 26 / 32 mm Maks. hitrost glavnega vretena: 8.000 obr/min Osi: X1 / Y1 / Z1, C-os integrirana v glavno vreteno Revolver: 1 Število orodij: 12 Pogonska moč: 6,7 kW (100 % ED) / 10,7 kW (40 % ED) Navor: 21 Nm (100 % ED) / 32 Nm (40 % ED) Iedpfx Adexlfk Nskjap PODROBNOSTI O STROJU Čas vklopa: 116.721 h Obratovalne ure: cca 48.000 h Krmiljenje: Traub TX8i-S Dimenzije & teža Dimenzije (D × Š × V): cca 4,4 × 1,4 × 1,7 m Teža stroja: cca 4.000 - 4.200 kg OPREMA Transporter za ostružke: lamelni trak, višina izmeta cca 950 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 135 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 16 mm, največja hitrost protivretena: 6.000 obr/min, število mest v zalogovniku orodij: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread cutting diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread cutting diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing main spindle: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Iasdpfx Aoxlffysdkop Control Controller type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejector and parts removal unit Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant unit with movable jet arms Power chuck system for both main and sub spindle

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Citizen C16-VII CNC Swiss Type Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max. machining diameter: 16 mm C-axis: main and sub spindle 5 controlled servo axes: X1/Z1/Y1/X2/Z3 4 driven tools on the vertical holder C-axis: main and sub spindle Including accessories: LNS Express 220 bar feeder, conversion kit for 16 mm and 10 mm Donaldson Torit extraction system Iaedpfx Adjv Rhd Hjkop Chip conveyor - Immediately available -

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 320 mm, premer struženja: 32 mm, skupna masa: 2.850 kg, Citizen C32-VIII Year: 2007 LNS Express 332 bar loader Chip conveyor Parts conveyor belt Ijdpfx Adswanb Neksap - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, DMG Mori MSL 60/7 CNC stružnica Krmilnik: Fanuc 31i Leto izdelave: 2013 Glavno vreteno: Hitrost vretena: 5.000 obr/min Premer odprtine vretena: 65 mm Prehod palice: 60 mm Proti vreteno: Hitrost proti vretena: 5.000 obr/min Premer vrtenja: 42 mm Pomiki: Pomik X1 / X2 / X3: 60 mm Pomik X4: 130 mm Pomik Z2: 80 mm Pomik Z3: 80 mm Pomik Z4: 340 mm Iaedpfxoxptyae Adkop Skupna teža: 3.500 kg Transporter za odrezke Podajalnik palic IEMCA Radialno gnana oprema Gnani vrtalni in rezkalni modul 4-pozicijski osnovni nosilec sani 3 Vrtalna in rezkalna naprava Aksialno gnana enota

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 18.000 h, Funkcionalnost: popolnoma funkcionalen, premer vretena: 32 mm, Oprema: podajalnik palic, transportni trak za ostružke, Tour numérique CNC à poupée mobile avec équipement complet ! Diamètre de passage broche principale : 32 mm DÉTAILS DE LA MACHINE Heures de fonctionnement : 18 000 ÉQUIPEMENT Douille de guidage entraînée de façon synchrone Axe C sur broche principale et contre-broche Convoyeur à pièces Douille à pince broche principale : F37 (673-53) Douille à pince contre-broche : F37 (673-73) Unité de perçage transversal à 3 broches Porte-outils 4 positions 16x16 mm Iasdpfxsxc I Apo Adkep Contre-broche (capacité de reprise 32 mm) Soufflage des pièces vers l’avant Éjecteur de pièces Sécurisation de l’éjection des pièces Détection de casse outil de tronçonnage Réservoir de liquide de refroidissement séparé avec contrôle de niveau et de débit Unité de lubrification centralisée automatique avec contrôle du niveau d’huile Goujons et plaques de mise à niveau Coffret à outils Chargeur de barres FMB Turbo 3-26 année Interface RS232C pour chargeur de barres Système d’extinction Kraft & Bauer / GUT Feuerschutz Convoyeur de copeaux Mayfran

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 17.300 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 200 mm, največja hitrost vretena: 10.000 obr/min, premer struženja: 20 mm, izvrtina vretena: 26 mm, TECHNICAL DETAILS Control: Mitsubishi Main and sub spindle diameter: 20 mm Spindle bore: 26 mm Maximum turning length (sliding headstock): 200 mm Maximum turning length (fixed headstock): 50 mm Main spindle speed: 10,000 rpm Sub spindle speed: 8,000 rpm Backworking Backworking block: with Y-axis Stations for backworking: 8 positions Deep hole drilling stations at sub spindle: 6 positions MACHINE DETAILS Operating hours: approx. 17,300 h Bar feeder: FMB Turbo 2-20 EQUIPMENT Ijdpfx Aswhmrcjdksap - D20 conversion kit - Müller CL3 high-pressure system with 8 individually controllable valves, 130 bar, and automatic back-flush filter - Kraft + Bauer automatic fire extinguishing system including fire protection flap - Angular adjustable driven tool holder, 3-position

Stanje: novo, Leto izdelave: 2024, - 10 linearnih osi - Zelo močno vpenjanje - Končna obdelovalna vretena in pripadajoči voziček z 9 pozicijami (X4) omogočata izvedbo kompleksnih postopkov v skritem času. - Kapaciteta vretena: 8000 obr/min Iasdpsu Ik Tisfx Adkop - Elektrovreteno s hlajenjem z oljem - Najnovejša generacija numeričnega krmiljenja FANUC 31i - Kompaktna konstrukcija iz sive litine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211S, največja hitrost vrtenja: 3.000 obr/min, Premer palice (maks.): 65 mm, vrtina vpenjalnega tuleca: 150 mm, TECHNICAL DETAILS Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet clamping system up to Ø: 65 mm Maximum spindle speed: 3,000 rpm Main spindle motor power: 11/15 kW Main Spindle Number of tools: 8 VDI-30 Maximum Z stroke: 50 mm Rapid traverse rate: 15 m/min Feed force: 6,790 N Cross Slide Number of horizontal slides: 2 Maximum working stroke X1/X2: 70 mm Feed force X1/X2: 8,000 at 50 bar Maximum working stroke Z1: 230 mm Turret Number of tools: 8 VDI-20 Iasdpfx Aowtq U Eodksp Vertical Slide Number of vertical slides: 2 Maximum working stroke X3/X4: 70 mm Manual length adjustment: 50 mm Rapid traverse rate: 15 m/min Feed force at X1/X2: 8,000 at 50 bar MACHINE DETAILS Machine height: 1,700 mm Machine footprint: 2,900 x 1,700 mm Machine weight: 4,100 kg Voltage: 380 V Frequency: 50 Hz Power: 22 kVA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 010947, skupna masa: 1.800 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 16-T, vhodna frekvenca: 50 Hz, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Type: 530 G Control: FANUC Series 16-T Connected load: 5 kVA Ijdpowx Ngkofx Adkeap EQUIPMENT Chip conveyor included Bar loader FMB Turbo 3-26 included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, premer struženja: 16 mm, največja hitrost vrtenja: 12.000 obr/min, prehod palice: 12 mm,

Stanje: novo, Leto izdelave: 2025, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 8.000 obr/min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Wiederaufbau - neuer Schaltschrank SIEMENS oder FANUC, wählbar Iaodpeugl S Iofx Adkop – Abholtisch mit Bremse – verstellbarer Anschlag mit Gegenbetrieb – 3 unabhängige Vorschubsysteme – mehrere Werkzeughalter und Bohrvorrichtungen – Trommelstangenführung mit Unterstützung – Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten, etc. Kontaktieren Sie uns.