1.500 kosov plastičnih zabojčkov LENOX LB 6040

1.500 St. LENOX Kunststoffkisten LB 6040 LB 604022 Volumen 43,7l, L 60cm B 40cm

Stanje: dober (rabljeno), Agnelli avtomatski valjar za testo Iz nerjavečega jekla, avtomatski valjar in gnetilec, proizvaja testeninske liste, zmogljivost do 250 kg na uro, agitirani zalogovnik iz nerjavečega jekla s prostornino 200 kg, širina listov 250 mm, nastavljiva hitrost, priložen rezervni trak, trifazni priklop. Gusdpfxjtu N A Te Afwsa

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: Guedjfv Awaspfx Afwoa • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min–max): 70–220 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight approx.: 60 kg Dimensions (L x W x H): 310 x 190 mm Guodpfx Aofv Avvsfwsa Toggle-lever pneumatic presses Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L23001388, skupna masa: 208 kg, kapaciteta rezervoarja: 14 l, vrsta hlajenja: voda, vhodna napetost: 380 V, Semi-industrial machine designed for kneading dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to the production of short-cut pasta, long pasta, and pasta sheets from dough. Suitable for medium-scale pasta production as well as for supplying dough sheets to cutting machines or nest formers. Gjdpfow Av Snjx Afweua All parts in contact with the dough and the entire frame are made of stainless steel. The mixing paddles and auger are easily removable for cleaning. The machine is equipped with an automatic cutter complete with a set of blades. Additionally, I have a brand new penne pasta production kit for sale (2,200 euros).

Stanje: zelo dobro (rabljeno), Ročno upravljene, vodno hlajene točkovne varilne klešče DALEX tip A 3119 s mehanizmom dvojnega hoda in kratkostopnim omejevalnikom. Kratek hod 25 mm – dolg hod 57 mm. Z elektrodno silačnim stikalom in sekundarnim pretvornikom za nadzor toka. Nazivna moč pri 50% ED: 8 kVA. Sekundarni kratkostični tok: 9,5 kA. Sila elektrod: 180 daN. Razmak med kraki: 120 mm. Doseg krakov: 250 mm. S sinhrono varilno regulacijo RS 11-2, glavnim stikalom, priključnim kablom in 16 A CEE vtičem. Na zalogi obsežen izbor vodno hlajenih elektrodnih krakov. Gjdpfsg Ew H Nox Afweua

Stanje: zelo dobro (rabljeno),

Stanje: novo, Pressure: 2.5 kN Stroke: 45 mm Throat depth: 90 mm Working height (min.–max.): 80–220 mm Table size: 120 x 60 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 390 mm Gsdpfx Aofv Av Iefwjua Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion system. It is used wherever constant pressure is required throughout the working process. Precisely manufactured; spindle hardened and ground; unlimited service life. Long spindle guide, optimal pressing force. T-slot according to DIN 650, milled centrally, T-slot nuts fit precisely.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, številka stroja/vozila: NEBR-4397, stiskalna sila: 15 t, Hidralmac C-Frame Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic single-column combination press from Hidralmac with 15 t pressing force. This machine is a custom manual solution, ideally suited for versatile assembly, straightening, and press-fitting tasks in workshop and service areas. ===== Technical Data & Information: Hydraulic Single-Column Press – 15 t – Manual Gedpsfhcc Isfx Afweua === General Information - Manufacturer: Hidralmac - Model: Single-Column Press / Assembly Press - Design: C-frame press / manual combination press - Pressing force: 15 t - Machine weight: approx. 330 kg - Stroke: 160 mm === Hydraulics - Drive: hydraulic hand pump - Oil tank capacity: 10 l (AW 46) - Return: spring-assisted === Construction - Robust machine body in accordance with DIN 8651 - Material: structural steel ASTM A36 - Cylinder: induction hardened and chrome plated - 4 support feet with M30 holes for floor mounting === Working Area & Geometry - Throat depth (rear wall to tool center): 280 mm - Height clearance: - Swivel table: 450 mm - Auxiliary table: 650–800 mm === Table & Tool Mount - Swiveling assembly table: 180° to the right - Central table bore: 60 mm - T-slots: M12 - Auxiliary table: 270 × 200 mm, with 60 mm central bore - Tool mount: M30 in cylinder head - Pressure plate: hardened, diameter 10 mm larger than cylinder === Additional Features - Rotary punch attachment: 1.5 t, mechanical, with brake - Rotary punch stroke: 220 mm - Integrated storage compartments in base for auxiliary tables === Operation - Manual hand pump operation (lever action) - Low-maintenance and reliable due to simple technology === Paintwork - Machine body: RAL 5012 (blue, textured finish) - Attachments: RAL 7021 (anthracite) ===== Assembly work, straightening, press-fitting tasks, workshop applications, service jobs, small batch production Hydraulic press, single-column press, C-frame press, workshop press, manual press, assembly press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery regulations as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass Canadian and European safety requirements as they comply fully with the Brazilian national safety guideline NR 12, which is based on these standards. Our core strengths lie in custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. The hydraulic systems feature components from leading European manufacturers.

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Gujdefk E Dzspfx Afwja Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: rabljeno, Pressure 10 t Stroke 400 mm Downward speed from 200 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 8.5 kW Machine weight approx. 1.3 t Space requirement approx. ... m - without clamping plate - only approved for operations with closed tooling Gsded R Szuepfx Afweua