Stroj za ščetkanje, stroj za strukturiranje, žaga, optika

- Italy Advance 400.2

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Dodpfx Afsh Ayyqsnocd Complete line: 11.5 m Technical information subject to correction.

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Dsdpfx Aopfatpsfnecd Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Stanje: rabljeno, Leto izdelave: 2019, Oprema: zavorni sistem na stisnjen zrak, Heated front and rear windscreen, additional equipment mounting / Dcsdor Ilxvopfx Afnod

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Press force: 220 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height: 600 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2555 mm Machine length: 3730 mm Machine width: 2290 mm Overall height: 3055 mm Table height: 820 mm Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 11,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Ram double-guided, stable and precise - Robust backgauge, double-guided - Manually adjustable backgauge fingers, double-guided on linear rail - Movable front support arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Manual crowning - Foot pedal with emergency stop - 380 V, 50–60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T control - Fiessler AKAS 2M laser finger guard - FPSC Safety PLC (manual) - X-R axis with servomotors - CNC crowning for high bending accuracy - 2 additional backgauge fingers Other working lengths and capacities available with the appropriate accessories! Dodpfx Asq D Dzlofnjcd

Stanje: dober (rabljeno), Facom Jet voziček za orodje z 8 predali Odlično stanje, orodja Facom. Proizvedeno v Franciji. Pribor po slikah. Cena je za celotno enoto. Dcjdsyg Ea Ujpfx Afnod

Stanje: dober (rabljeno), Leto izdelave: 1996, Weinig Unimat 23 Four-Sided Planer – Manufactured in Germany – Ribbed table – Year of manufacture: 1996 – Feed rollers embedded in the table TECHNICAL SPECIFICATIONS: planing width: 230 mm Dodsh Dwl Depfx Afnocd planing height: 160 mm ribbed table spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW infinitely adjustable feed speed: 6–36 m/min feed motor power: 5.5 kW six driven top steel rollers two driven top rubber rollers three feed rollers in the table pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of infeed table: 1970 mm electric height adjustment central lubrication (divided) diameter of dust extraction outlets: 140 mm machine dimensions (L/W/H): 410 / 200 / 180 cm weight: approx. 3000 kg

Leto izdelave: 2023, stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Dedpfx Afencd Azjnjcd Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Dsdpfx Afog U Uv Rsnocd Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Working width: 300 mm Working length: 1100 mm Brush diameter: 190 mm Brush speed: 1500 rpm Spindle diameter: 40 mm Number of brushes: 2 pcs. (metal + plastic) Maximum feed belt speed + stepless adjustment: 0–10 m/min Dedpfxsgykaus Afnocd Working height: 940 mm + 50 mm Maximum material height: 300 mm Suction port diameter: 2 x 120 mm Overall dimensions Length: 1240 mm Height min/max: 1350/1650 mm Width: 950 mm Weight: 435 kg Total power: 4.65 kW Voltage: 400 V Robust housing for high stability Working height of 940 mm + 50 mm and max. material height of 300 mm give you the freedom to process large workpieces Two independent brushes (steel, plastic) with powerful motors and precise manual adjustment enable high product quality Two independent extraction units ensure effective removal of sawdust and debris The machine is built from high-quality materials, guaranteeing reliability and top-quality workpieces Stepless feed belt speed adjustment allows you to achieve smooth operation and the desired productivity Many years of manufacturing experience at Optimat enable us to meet even the highest demands – a machine tool for any budget.

Stanje: rabljeno, Grindermak 150-06 Novi stroj za brušenje alata za probijače, temeljen na CNC brusilici Amada Togu Grindermak 150-06 / Na prodaju Hod stola/pomicanje: 180 mm Maksimalna udaljenost između stola i brusnog kotača: 230 mm Z-pomak: 0,0001–20 mm Maksimalni promjer brusnog kotača: 150 mm Brzina vrtnje brusnog kotača: 3.400 o/min Snaga brusnog kotača: 1,1 kW – 3.000 o/min Dcsdsfuakcspfx Afnod Snaga motora za pomak u osi Z: 400 W Kompletno s touch screen zaslonom. Na lageru. Brusilica tipa Amada Togu / Trumpf quick sharp / Quick grind / Quick set / Quick load