Tračna žaga

ŻEFAM typ DRNA-63

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height (side panel): 200 mm Weight: 1069 kg Space requirement: approx. 2400 x 1200 mm SIEGMUND Authorized Dealer – all items available! The welding tables are equipped with a scale as standard. Special set – including 28-piece Tool Set 3 Product Description Nodpfxsxabffs Anpolf - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality S355J2+N steel + plasma nitriding - Bore diameter: Ø 28 mm - Bore holes on the surface in diagonal grid pattern - Edges, corners, and holes rounded - Side panel height: 200 mm - Bore holes on the side panel in diagonal grid pattern - Includes surface scaling - Design reinforced by ribs - Grid lines enable precise setups Plasma-nitrided version: - Protection against rust / scratches / adhesion of welding spatter - Corrosion-resistant / increased load capacity Specifications and Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma-nitrided Extreme 8.7 model with scale - Diagonal grid on table surface - Diagonal grid on the side panel - Incl. 4x basic equipment feet - Including 28-piece Tool Set 3: + 10x 280610.N Clamp + 6x 280630.N Clamp + 4x 280648.1.N Prism + 24x 280510 Dowel Pin + 4x 280740 Magnetic Dowel Pin + 8x 280410.N Stop + 8x 280420.N Stop + 6x 280110.N Angle Bracket + 2x 280152.N Angle Bracket + 2x 280162.N Angle Bracket + 1x 280166+67.N Angle Bracket + 1x 283999 Accessory Set

Stanje: novo, Leto izdelave: 2026, Stična vrtalna strojnica CORMAK 32 mm je robustna in vsestranska stična vrtalna strojnica za obdelavo kovin, namenjena intenzivni uporabi v industrijskih obratih, kovinarskih delavnicah in oddelkih za vzdrževanje. Povečana premera vrtanja, stabilna konstrukcija in natančno vodenje vretena jo naredijo idealno za vrtanje, razširjanje in navojkanje široke palete kovinskih materialov. Glavne prednosti stroja Maksimalna premera vrtanja – 32 mm – omogoča obdelavo različnih jeklenih, litoželeznih in aluminijastih delov. Dvo-hitrostni motor 1,5 kW – zagotavlja optimalen navor pri delu pri nizkih in visokih obratih. Širok obseg hitrosti vretena – od 60 do 3480 vrt/min, dosežen s kombinacijo prestav in jermenskega pogona. Vreteno MK4 z gibom 120 mm – omogoča globoko vrtanje ob ohranjanju togosti orodja. Vrtenje v levo/desno – omogoča varno navojkanje in hitro odstranjevanje orodja. Gravitacijski hladilni sistem – izboljša življenjsko dobo orodij in kakovost obdelane površine. Masa 144 kg – zagotavlja veliko stabilnost pri delu in minimalizira vibracije. Konstrukcija in tehnologija – premišljena zasnova za neprekinjeno delo Stična vrtalna strojnica CORMAK 32 mm je zasnovana na podlagi robustnih komponent, ki zagotavljajo dolgo življenjsko dobo in zanesljivost. Osnova in miza sta izdelani iz litoželeza s povečano togostjo, vreteno pa je vodeno v natančnih valjčnih ležajih, ki omogočajo vrtanje z visoko natančnostjo. Pogon se prenaša preko jermenskega pogona, ki v kombinaciji z dvo-hitrostnim motorjem zagotavlja kar 24 hitrosti vretena – to omogoča idealno prilagoditev parametrov za vsako vrsto obdelave. Natančnost in učinkovitost – zanesljivost pri vsakodnevnih opravilih Motor z močjo 1500 W (400 V) omogoča delo pri veliki obremenitvi, velik hod vretena – 120 mm – pa omogoča vrtanje globokih lukenj v enem delovnem ciklu. Velika delovna površina mize (475 × 425 mm) olajša pritrditev delov različnih velikosti. Širok obseg vrtljajev omogoča natančno nastavitev parametrov glede na premer orodja in vrsto materiala. Celotna konstrukcija zagotavlja stabilnost tudi pri delu z elementi, ki zahtevajo veliko silo rezanja. Uporaba – idealna za delavnice in industrijsko proizvodnjo CORMAK 32 mm je stična vrtalna strojnica za obdelavo kovin, ki je primerna za: delavnice za orodja in kovinarske delavnice, oddelke za vzdrževanje v industrijskih obratih, eno- in serijsko proizvodnjo, izobraževalne centre in tehnične laboratorije. Standardna oprema Dvo-hitrostni motor 1500 W Vrtenje v levo/desno Gravitacijski hladilni sistem Navodila za uporabo v poljskem jeziku Izjava o skladnosti CE Tehnični podatki Parameter Vrednost Maksimalna premera vrtanja 32 mm Premer vpenjalne glave 16 mm Nosilec vretena MK4 Razdalja vretena od stebra 254 mm Hod vretena 120 mm Maks. razdalja mize od vretena 595 mm Nlodpfx Anoridpwepof Maks. razdalja osnove od vretena 1075 mm Dimenzije mize 475 × 425 mm Premer stebra 92 mm Motor 1,5 kW / 400 V Hladilni sistem Gravitacijski Celotne dimenzije 1670 × 760 × 475 mm Teža 144 kg Obseg hitrosti vretena 60–3480 vrt/min

Stanje: novo, Leto izdelave: 2026, Viber-Air INV11-500 vijačni kompresor s sušilcem in inverterjem Moč: 11 kW / 7,5 KM Hitrost motorja: 3000 obr/min Rezervoar: 500 litrov Napetost in frekvenca: 400 V / 50 Hz Zaščita pred vodo: IP23 Glasnost: 65 dB Delovni tlak: 10 bar Pretok zraka: 1500 l/min Pogonski sistem: Neposreden pogon Premer izhoda: G 1 Sušilec: TR-20HP Hlajenje: Olje Nledsxdbubspfx Anpef Proizvajalec vijaka: BAOSI Inverter: Vključen v dobavo Zaslon: HTK070 Dimenzije (D / Š / V): 1900 / 750 / 1030 mm Teža: 500 kg Sesalna zmogljivost: 1800 l/min Izhodna zmogljivost: 1500 l/min Na zalogi!

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height (side panel): 200 mm Weight: 949 kg Required space approx. 2400 x 1200 mm SIEGMUND Authorized Dealer – all items available! Article No.: 7D.1 Product Description - Fully hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality steel S355J2+N + plasma nitrided - Bore diameter Ø 28 mm - Surface bores in diagonal grid - Corners, edges, and bores rounded - Side panel height 200 mm - Boreholes in side panel arranged in diagonal grid - Includes surface scaling - Rib-reinforced construction - Grid lines enable precise setups The welding tables are standardly equipped with a scale. Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Equipment: - 28 mm hole grid / dimensions 2400 x 1200 x 200 mm - plasma-nitrided "Extreme" version with scale - Side panel + tabletop with diagonal grid Nledpexaayzofx Anpef - incl. 4x standard feet

Stanje: novo, Leto izdelave: 2025, Viber-Air Moč: 7,5 kW / 7,5 KM Hitrost motorja: 3000 vrt/min Volumen rezervoarja: 500 litrov Napetost in frekvenca: 400 V / 50 Hz Njdpfsxdbvrox Anpolf Vodotesnost: IP23 Raven hrupa: 65 dB Delovni tlak: 10 bar Pretok zraka: 800 l/min Pogonski tip: neposredni pogon Premer izhoda: G 3/4 Sušilnik: TR-10HP Hlajenje: zrak Proizvajalec vijaka: BAOSI Frekvenčni pretvornik: vključen v dobavo Zaslon: HTK070 Dimenzije (D/Š/V): 1900/800/1660 mm Teža: 390 kg Vhodna kapaciteta: 950 l/min Izhodna kapaciteta: 800 l/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Lastnosti Vrsta stroja: Avtomatska tračna žaga CNC Območje reza: 0° (ravni rez) Največji premer okroglega materiala: Ø 300 mm Največja velikost kvadratnega materiala: 250 × 250 mm Največja velikost pravokotnega materiala: 330 × 250 mm Nodpfezkubusx Anpolf Dimenzije žage: 3650 × 27 × 0,9 mm Motor žage: 2,2 kW, trifazni Hitrost žage: Spremenljiva, približno 15–100 m/min, z uporabo inverterja Največja odprtina objemke: 335 mm Napredovanje materiala: Samodejno CNC, z objemko za podajanje Napajanje: 400 V, trifazno (50 Hz) Načini delovanja: Ročni, polavtomatski in programabilni avtomatski

Stanje: novo, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the installation: Number of rack rows: 01 pc. Length per rack row: approx. 5,025 mm Number of bays per rack row: 02 pcs. at 2,400 mm each Number of levels incl. ground level: 04 pcs. Scope of delivery includes: Nlsdpskti Sxofx Anpsf 03x pallet racking frames, new Frame colour: Sendzimir galvanized Footplate colour: RAL 5010 gentian blue Frame type: P73 Frame profile: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, footplates The frames are delivered unassembled (bolted lattice design) 2,350 mm high 800 mm deep Note: The upright frames are delivered unassembled. If desired, we can pre-assemble the frames for you for an additional fee of €17.50 plus 19% VAT. 16x pallet racking beams, new Beam colour: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: stepped beam Connector: 5 HK (hooks) Clear span: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 08x chipboards, 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly two-piece) 32x locking pins, new Design: completely galvanized For securing the beams against accidental lifting 12x wedge anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 06x shims, new Design: completely galvanized For leveling the upright frames when installed on uneven floors 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transportation or shipping of this item is required, additional costs will apply. Please contact us for a quote, specifying the delivery destination and scope.

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 250 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Machine weight: approx. 640 kg Nlodoxaaqtjpfx Anpef Equipment: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Large, mounted rotary table * For miter cuts from 45° right to 60° left - Automatic saw frame lowering * Infinitely variable feed rate * Automatic cut-off at end of cut - Manual cutting mode selectable - 2 saw band speeds - Saw blade guide made from carbide plates - 1x saw blade - 1x angle stop - Swarf removal brush (rotating with blade) - Control panel - front right - Hydraulic tensioner for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Coolant system - Operating manual in German

Stanje: dober (rabljeno), Naprodaj je rabljena tračna žaga AS s širino reza 435 mm. Žaga je v dobrem stanju, obnovljena in pregledana s strani našega strokovnega osebja. Tehnični podatki: - Širina reza: 345 mm - Višina reza: 165 mm Nedpfx Ajzar Ulsnpjlf - Velikost mize: 445 x 350 mm - Možnost odsesovanja: Ø 100 mm - Moč motorja: 0,7 kW / 1 KM - Leto izdelave: 2016 Stroj se nahaja v A-5431 Kuchl in je možen ogled kadarkoli v času obratovanja. Pridržujemo si pravico do predhodne prodaje! Info tel. 06244-20299. Sorodne besede: tračna žaga, žage, žaga, trak Referenca: R-P03CW

Stanje: novo, Table diameter: 340 mm Table load capacity: 160 kg horizontal Table load capacity: 100 kg vertical Swivel range: 0 - 90.0 degrees Rotational speed: 0.6 - 6.0 rpm Bore: 60.0 mm Motor: 230 Volt Machine weight: approx. 56.0 kg Dimensions (L x W x H): 385 x 340 x 375 mm Equipment/features: - Table can be tilted and locked between 0 and 90 degrees - Start/stop function via remote foot switch - Rotational direction selectable (left/right) - Adjustable rotation time - Turntable is equipped with a 60 mm through-hole - Turntable diameter: 340 mm - Surface is chrome-plated for protection against welding spatter - Table speed adjustable from 0.6 to 6 rpm - Welding machine can be controlled via the turntable control - Ground contact supports 300 A (100%) - Turntable and control unit are separated - HF-protected - COM 1802 controller with overlap welding function - User manual in German Functions of the COM 1802 controller: - Left/right rotation - Stepless speed control - Welding torch on/off - Adjustable overlap welding - Timer for rotation time (2-stroke / 4-stroke) - Speed display Attention: The control unit operates on 230 V and must not be placed on the welding table. Nledpoxabm Nofx Anpsf THE HOUSING OF THE TURNTABLE MUST BE DIRECTLY CONNECTED TO BUILDING EARTH.