Enoslojna stiskalnica - hidravlična

ZEULENRODA PYE 25

Stanje: rabljeno, Technical details: Pressing force: 25 t Column width: 360 mm Stroke: 500 mm Installation height, table/ram top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Gedpsu U D I Refx Afqott Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke modes TÜV inspection valid until 05/2024 As is. *

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.150 mm, skupna masa: 12.000 kg, premer vrtanja: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical data: Gsdpfx Afswcldaoqott Travels: X-axis longitudinal (table): 1800 mm Z-axis cross (column): 1700 mm W-axis cross (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, please refer to the photos.

Stanje: dober (rabljeno), Leto izdelave: 1988, številka stroja/vozila: 053-019/35, Offer 24591 Gjdpfewd Nybox Afqett Technical specifications: - Max. pressing force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 0 – 40 mm/s - Return speed: 0 – 200 mm/min - Installation height: 800 mm - Throat depth to centre of ram: 360 mm - Ram clamping area: 440 x 360 mm - Ram clamping pin: 40 mm - Table size: 630 x 500 mm - Table height above floor: 710 mm - Drawing force: 10 t - Max. drawing depth: 160 mm - Drive: 400 V / 4 kW - Space requirements (approx.): W 800 x H 2720 x D 1150 mm - Weight (approx.): 2500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, skupna višina: 27.500 mm, skupna širina: 10.500 mm, skupna dolžina: 16.500 mm, stiskalna sila: 25 t, širina mize: 630 mm, dolžina mize: 500 mm, obratovalna hitrost: 100 mm/s, skupna masa: 2.200 kg, hitrost vzvratne vožnje: 450 mm/s, širina plošče bata: 450 mm, dolžina plošče bata: 360 mm, hod blazine orodja: 160 mm, razmak između stupova: 800 mm, hod: 500 mm, moč: 8,75 kW (11,90 KM), Hydraulic Press PYE 25 S1M Year of manufacture: 1990 Manufacturer: VEB Wema Zeulenroda (Germany) Specifications: - Maximum pressing force: 25 tons - Working pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Daylight: 800 mm - Cylinder stroke: 500 mm - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec Gjdpfx Afstzwxdoqstt - Power requirement: 8.75 kW - Weight: 2200 kg - Height: 2750 mm, Length: 1650 mm, Width: 1050 mm The machine is in very good technical condition, having undergone a complete overhaul. Viewing and on-site testing under power are possible.

Stanje: rabljeno, Leto izdelave: 2008, premer struženja: 275 mm, izvrtina vretena: 80 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.345 mm, skupna višina: 2.232 mm, skupna dolžina: 4.339 mm, skupna širina: 2.232 mm, skupna masa: 7.600 kg, Oprema: dokumentacija / priročnik, Mori Seiki NL 2500 SY / 1250 CNC stružnica z Y-osjo, gnanimi orodji in drugo glavno vreteno CNC krmilje MSX-850-III (Mitsubishi 720 BM) Premer struženja 275 / 366 mm Premer izvrtine vretena 80 mm Hitrost vrtenja vretena 4000 min⁻¹ Glavni vretenski motor 18,5/15 kW Pomik X-osi 260 mm Gsdpfexnmzhsx Afqett Pomik Y-osi +50 / -50 mm Pomik Z-osi: 1345 mm Pomik W-osi (protiprimež od glavnega vretena) 1275 mm Min. indeksiranje C-osi glavnega vretena 0,001° Število orodij v revolverju 12x Število gnanih orodij 12x Orodni konus BMT Podajalnik palic LNS Quick Load Servo III Vreteno gnana orodja 6000 min⁻¹ Za vsa vprašanja o stroju ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Vabimo vas, da si ogledate tudi naše druge oglase in pridobite celovit pregled nad našo zalogo.

Stanje: rabljeno, Technical Specifications: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Godpfsvc Awxsx Afqstt Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, skupna višina: 27.500 mm, skupna širina: 10.500 mm, skupna dolžina: 16.500 mm, stiskalna sila: 25 t, širina mize: 630 mm, dolžina mize: 500 mm, obratovalna hitrost: 200 mm/s, skupna masa: 2.400 kg, hitrost vzvratne vožnje: 450 mm/s, širina plošče bata: 450 mm, dolžina plošče bata: 360 mm, razdalja med stojali: 800 mm, hod: 500 mm, moč: 12,5 kW (17,00 KM), Hydraulic Press PYE 25 SS. Year of manufacture: 1977. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 25 tons - Operating pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm Gtedpfxjtzxvwo Afqet - Daylight opening: 800 mm - Ram stroke: 500 mm - Descending speed: 200 mm/sec - Ascending speed: 450 mm/sec - Power requirement: 12.5 kW - Weight: 2,400 kg - Height: 2,750 mm, Length: 1,650 mm, Width: 1,050 mm The technical condition of the machine is very good. The machine has undergone a complete overhaul. Inspection and operational testing of the machine are possible on site.

Stanje: novo, The KNWP 50 M is a precision workshop press in the Workshop Presses category and belongs to the group of manual workshop presses. These high-quality hydraulic presses, manufactured in Europe, are ideal for general assembly and straightening work as well as for testing workpieces. They offer safety and professional handling, making them the perfect choice for mechanical workshops, garages, and metalworking shops. The KNWP 50 M is designed for repair and assembly tasks such as pressing in and out bearings and straightening shafts. The machine features a maximum pressing force of 50 t and a total ram stroke of 160 mm. Thanks to its well-engineered design, it enables both manual and foot operation, as well as a height-adjustable worktable system and a multifunction die for straightening flat material. Invest in this robust and powerful workshop press from KNUTH and equip your workshop with professional-grade equipment. Order now! Gtsdpfjuyh Twsx Afqet

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: Spindle diameter: 100 mm X travel: 1500 mm Y travel: 1450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° Control system: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 - 1,600 rpm / stepless Table load capacity: 4.0 t Table size: 1100 x 1400 mm Rotary table: 360° Feed rates (X/Y/W/Z axis): 2 - 2000 mm/min Rapid traverse (X/Y/W/Z axis): 5000 mm/min Total power requirement: 40 kW Switch cabinet dimensions: 2000 x 600 x 2000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC drilling and milling machine with hydraulic power unit Equipment: Gjdpfx Aeu Idqbjfqstt Measuring probe Electronic handwheel Hydraulic counterbalance Y-axis Universal milling head And a range of accessories – please inquire! Subject to prior sale.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Model: EDIMC 1200-500/42-25/22-16 Table Size: 4200 x 2500 x 650 mm The table extends 3000 mm outwards for loading. Suitable for tools up to 4200 x 2500 x 1500 mm Maximum tool weight: 40 t Gtedpfx Asgphaxsfqet Speed at 700 t: 62 mm/second, at 1200 t: 35 mm/second Ram dimensions: 4200 x 1750 mm Maximum open height: 2200 mm Blankholder force: 50 to 500 t Blankholder stroke: 400 mm Blankholder size: 3100 x 1600 mm Blankholder speed: 150 mm/second Ram blankholder with 150 mm stroke Stroke: 1600 mm 475 kW, 890 amps Machine weight: 210 t New motors New control system Operated for 3 years by a German automotive company and then sold to an auto parts manufacturer in Brazil, where it ran until 2020.