Centralni stružnica ZERBST - DPS 1800

ZERBST DPS 1800

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.900 mm, skupna višina: 3.000 mm, skupna dolžina: 19.500 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, skupna masa: 13.000 kg, širina mize: 800 mm, Linija je namenjena proizvodnji EURO palet 1200/800. Za učinkovito zbíjanje palet so potrebne tri osebe: ena za polaganje spodnjih delov in dve za polaganje zgornjih delov palete. Zmogljivost stroja je 2500 kosov v 8 urah, odvisna pa je tudi od hitrosti delavcev pri polaganju elementov. Po zbíjanju se paleta prenese do rezkalnika, ki obdela paleto, odreže vogale in izžge oznake. Nato paleta vstopi v stapler, ki paleto odreže na dolžino 1200 mm, obrne in s pomočjo dvigala zloži v sklad. Možno je zlaganje v t.i. sendvič (29 kosov) ali posamično do 20 kosov. Za staplerjem je zaloga za tri stebre palet. Linija je prilagojena za odsesavanje žagovine. Godpfot Tbuyex Ac Eetu

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request. Gtedpjfg E Hpefx Ac Esu

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Gtodpfxouy Ifgs Ac Eju Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.).

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, širina mize: 760 mm, dolžina mize: 2.700 mm, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optional with Decoiler and Straightener. Gtedpfx Aju Dxb Toc Eou

Stanje: novo, Original Siegmund welding table perforated plate Octagonal, 2D or 3D 1200 x 200 mm with 28 mm holes 514 kg, diameter 1300 mm Plasma-nitrided Original price €8,900 Half price when purchased together with positioner Sold only in combination with positioner Gtedpfjt Sk Ndsx Ac Eou Hole mount: 8 holes, 500 x 500 mm, diameter 18 mm (see photo)

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Gtsdpfx Acjfw Ah Rj Esu Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.100 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, največja hitrost vrtenja: 6.000 obr/min, kapaciteta rezervoarja: 1.200 l, SHW Powerspeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (ram): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y, and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head swivel range (mount): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Conveyor length: 10,000 mm Coolant system • Tank capacity: 1,200 liters ATTENTION: Images are sample illustrations for reference only About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls Gsdpsv Dhw Tefx Ac Ejtu - Control modernization _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC milling machines - CNC milling machines - milling machine - large component machining - large part machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Stanje: dober (rabljeno), Leto izdelave: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Gtsdpfjvi Hryox Ac Esu Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further data, see data sheet Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Leto izdelave: 2011, Stanje: dober (rabljeno),

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. Gsdpfstzdyzex Ac Eotu • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!