1 x 100 m³ aluminijasti silos Ø 3.000 mm

Zeppelin

Stanje: zelo dobro (rabljeno), Here we offer you a Zwick / Roell tensile testing machine (table-top testing machine). Zwick / Roell Materials Testing Machine Model: BDO-FB0.5TH - Load testing in tension/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Width of test area: unlimited - Test area depth: 100 mm Dodpfxod Sr S Ie Aa Hswf - Max working stroke without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection (for PC operation): COM 1 - Power specifications: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see pictures) (Subject to change and error in technical data and specifications!) If you have any further questions, we are happy to answer them by phone.

Leto izdelave: 1979, Stanje: dober (rabljeno), 1 x 90 m³ aluminum silo with long base ring and filter housing, ø 3,000 mm Designed for a specific gravity of 0.6 kg/dm³ (former flour and starch silo) Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Total height: approx. 15,950 mm + 1,200 mm railing Weight: approx. 4,000 kg Specific gravity: 0.6 kg/dm³ Dwsdpfsgig D Dsx Aa Hsf Material: Aluminum AlMg3 Food-grade: yes Insulation: approx. 100 mm mineral wool with bolted cladding sheet (sheet metal partially damaged, but can be repaired by us). Connections and fittings: On the top plate: 1 x circumferential roof railing (ø 1,800 x 1,200 mm) with two access openings 1 x hinged manhole with safety grid DN 600 1 x access ladder to filter housing 2 x lifting eyes In the filter housing: 1 x flange DN 100 for filling line 4 x vent openings DN 600 with filter bag 3 x connections for control/measurement equipment On the shell: 1 x ventilation grid (filter housing) 1 x filling pipe 1 x access door (approx. 1,850 x 800 mm) The silo terminates in a 60° cone NW 1500 with inspection opening. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo is not fitted with burst discs or explosion protection devices. For further details, see technical drawing and photos.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stock No. 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: - 1 volumetric dosing unit - Extruder Plastmachines type PME 100 Single screw Ø 100 mm – 35 L/D ratio Drive 134 kW – DC motor - 1x degassing zone - Melt filter BKG type K-SWE 121 RS – back flushable incl. Dwodpetvfhcjfx Aa Hsf Hydraulics 3 kW - Strand die head with 20 holes x Ø 3.5 mm - Strand cooling trough 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 3000 - ResoTec control / switch cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available & ready for demonstration at our Wuppertal facility

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Djdpfxok Hz Nqe Aa Howf Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2008, Stanje: rabljeno, Bongard Baguette Line Bongard divider with double piston Belt roundmoulder on castors Djdpfx Aoc Utgwea Howf Bongard intermediate proofer Bongard longmoulder with table Excellent condition and ready for operation

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Dwsdpfxohy Tp Do Aa Hof Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 2011, Stanje: dober (rabljeno),

Stanje: novo, številka stroja/vozila: Baureihe GSP, Conventional granulators face significant challenges when shredding long pipes and profiles. In most cases, pits or platforms are required to allow feeding of the long and bulky parts. For this reason, ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be fed comfortably and there is no risk of blockage, as the machine automatically doses the material. If the cutting chamber becomes overloaded, no further material is taken in until the machine can continue operation without motor overload. Djdpoghgftefx Aa Howf ZERMA also offers a wide range of options, such as extraction systems, conveyor belts, metal detectors, fine material separators, and more.

Stanje: zelo dobro (rabljeno), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in research and development. It is an excellent addition to the already existing FTIR series, which covers, among other things, the standard laboratory range. AIM-8800 Specifications Optics: 15x Cassegrain objective 15x Cassegrain condenser mirror with purge inlet Dodsf I Ew Hopfx Aa Hewf MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm⁻¹ Type 2 - 5000 - 650 cm⁻¹ Electrically actuated aperture XY Θ directional drive. The adjustment increments for the XY directions are 1 µm above the sample surface and 1° steps in Θ direction (numeric input possible). Minimum setting value: 3 µm Motorized XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30 mm. Resolution: 1 µm spacing Sample thickness: Reflection mode – ≤ 40 mm Transmission mode – ≤ 10 mm Operation via the main device keyboard Selection of measurement mode / XY stage operation (four-step speed control) / manual focusing / illumination control (Optional) Control via PC Selection of measurement mode / XY stage operation / auto-centering / manual focusing / auto-focusing / illumination control / aperture adjustment / aperture preview / measurement position and recording of aperture settings (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410 mm x D540 mm x H520 mm x 36 kg Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: rabljeno, Reverse osmosis system with Grünbeck GENO fine filter FS 1 1/4, Jansen GmbH AQUATRON, and Grundfos CR5-24 A-FGJ-A-E-HQQE pump. For further details and scope of delivery, please refer to the photo. Technical specifications: see nameplate. Dimensions: approx. 3.40 m (length) / 0.70 m (width) / 1.60 m (height) Item condition: used, untested An inspection in Wettringen is possible! For further questions, you can contact us via email. Sale exclusively to business customers for commercial purposes and under exclusion of any warranty for material and legal defects! By purchasing, you confirm that you are acting as a business or self-employed professional. Otherwise, you are violating our terms and conditions! Dedotzw R Tjpfx Aa Howf Location: Wettringen