Popolna žaga (mobilna)

Zenz BN110

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveyor technology year: 2022 Serial number: 141-8300 Features: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holding devices) • Log lifting preparation with frame • 4 height adjustment claws (+2 holding devices) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Operator seat mounted on armrests • PLC controls on the left - joystick on the right • 1 Zenz sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication with 20l tank and nozzle o Mounted on blade guide • Log lifting device o With 3 lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Hydraulic ejector for frame 820mm • Horizontal green laser indicator Mechanization consisting of: • Hydraulic folding frame for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors Lrsdpowlfdxsfx Aamsp o Both roller conveyors run simultaneously • 4m long roller table – slightly inclined with end stop o All electrical and hydraulic elements are operated from the operator’s station The block bandsaw including conveyor technology is fully operational.

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Ledsv Si Szopfx Aamorp Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 141-8300, dolžina rezanja (maks.): 7.000 mm, širina rezila žage: 100 mm, leto zadnje generalne obnove: 2022, Zenz BN 110 S Saw incl. mechanization 22 kW drive motor Ljdpfewhcwhex Aamerp 7 m cutting length 5 vertical supports 2 log turners (+ 2 mounts) Log lifter 4 level compensators with claws 1 log roller 1 pre-cutter Water lubrication, 20 l tank PLC control Seat mounted on armrests Left: PLC – Right: Joystick Mechanization, year of manufacture 2022, consisting of: Hydraulic flap frame for removal at the saw with electrically driven roller conveyor Roller conveyor with hydraulic ejectors Small roller track, 4 m All electrical and hydraulic elements can be operated from the operator’s station. Zenz sharpening machine, type AHB No. S - 1012

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Right Discharge 5 Sorting Bins Total Length 26 Meters Ljdsgw Scqopfx Aamsrp 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank Ledpfx Aajlb I Daomjrp - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, številka stroja/vozila: SN1744271, Mostovno dvigalo ± 11.550 mm x 5.000 kg Lrsdsv Ipvxjpfx Aamep

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Lredpfoh E Sghjx Aamep Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: novo, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Reach: 260 mm Speeds: (12) 55 - 2520 rpm Ledpewhd Afofx Aamjrp Quill stroke: 130 mm Table size: 585 x 190 mm Travel X: 380 mm Travel Y: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread draw spindle - Tapping device - Rotatable table - Height-adjustable safety cover - Spindle guard protected by limit switch

Stanje: novo, Leto izdelave: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are paramount. This model features a swivel arm from 0 to 60°, with carbide guides for the saw blade. The frame design ensures precise and quiet operation. Machine Characteristics The horizontal band saw for metal with a pivoting arm allows for perpendicular cutting to the axis of the material or at any angle within a 0–60° range. The material can be fed manually or by any mechanical device, while tool feed is automatic. The blade guides are fitted with special carbide and bearing inserts, which greatly influence blade guidance, its service life, straightness, accuracy, and cutting quality. Carbide guiding significantly reduces wear on the machine and blade. The machine is equipped with a powerful coolant pump in a closed-loop system. The arms of the saw are made of one-piece cast iron and, combined with a 27 mm wide cutting blade, enable high-volume series cutting for both profiles and solid materials. The vise is mounted on an adjustable bed and is equipped with a quick-release clamp. The blade guides use hard metal (carbide) plates and a bearing system, ensuring high accuracy and straightness of cuts thanks to carbide guides. The base features a cast iron worktable with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting motion comes from the movement of the blade, while the arm moves down. The descending speed (cutting speed) is controlled by a hydraulic cylinder. Feed speed is regulated on the saw’s control panel. Two blade speeds are available: 37.5 and 75 m/min. Once the arm reaches the lowest position (after completing the cut), the blade drive switches off automatically. Safety is provided by the blade guards and micro-switches that stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection switches off the saw automatically in case the blade breaks. Power transmission is via a motor with a worm gear drive. The motor is equipped with a thermal protection fuse to prevent overheating during operation. Technical Data: TOTAL POWER: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE SIZE: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VIC HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter x Profile x Square): Angle 0º: ø220 / 260 x 140 / 200 x 200 mm Angle 45º R: ø160 / 160 x 140 / 160 x 160 mm Angle 60º R: ø100 / 120 x 100 / 100 x 100 mm Price does not apply to machines purchased in Poland. Lredpfx Asudi Unoamep

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration / Trade Show / New Machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipping knives: 2 pcs Number of counterknives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Lsdew I R Rnopfx Aamerp Number of infeed rollers: 3 pcs Throughput capacity: up to approx. 20 stacked cubic meters/hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Infeed roller drive power: 2 x 2.2 kW Operating/control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, and infeed method S&F chippers and drum chippers with horizontal infeed are used in many sectors of the wood processing industry (sawmills, timber plants). The “ATH” series chippers produce high-quality, homogeneous wood chips with low fines content from wood residues, e.g., as premium chips for the pulp industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible application - Custom manufacturing Do you need further information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Shredder