Avtomatizirana proizvodna linija za škatle

Zemat Automatische Schachtelproduktionslinien

Stanje: rabljeno, Gainsborough Verwiegeanlage und All-Fill Pulverdosierer. Rodpfx Agovvpphs Tsp

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request. Rjdpforkgy Ujx Ag Tsp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Rodpfx Aet Eu Azog Tep

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Clamping force: 25 tons Version: with shuttle table Opening force/stroke min.-max.: 100/225 mm Mold height variable min.-max.: 122-222 mm Shuttle table stroke: 500 mm Weight on shuttle table: max. 120 kg Ejector force/stroke: max. 16/40 kN/mm Rjdpfxju Epy Ne Ag Top Screw diameter: 22 mm Effective screw length L/D: 20 Screw stroke: max. 90 mm Shot volume: 34 cm³ Shot weight: 31 g Injection pressure: 2,000 bar Operating hours: 12,500 h

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Rjdpjutni Rsfx Ag Tep Model: SBO 16/16 S1 Year of manufacture: 1998 Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Comes with comprehensive and original technical documentation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 90 mm, skupna masa: 11.000 kg, vpenjalna sila: 160 kN, skupna širina: 2.200 mm, skupna dolžina: 5.200 mm, skupna višina: 2.200 mm, razmak osovin: 250 mm, Oprema: dokumentacija / priročnik, Hello, This offer concerns extrusion blow molding machines for PP, HDPE, PE, PE/PP, and HDPE/PP (for canisters and bottles up to 6L capacity). There are four complete lines available, including all essential auxiliary equipment: compressors with tanks, chillers, scrap grinders with conveyor, color mixers, pneumatic granule loaders, bottle conveyors, and a bottle leak tester. The machines are equipped with a Moog Parison Controller—an advanced parison wall thickness control system for blow molding machinery, which precisely regulates wall thickness to ensure uniform material distribution inside the mold. This results in higher product quality, improved durability, and reduced raw material consumption in the production of bottles and other packaging. The main control panel is available in both Polish and English. Attached are a technical drawing of the blow mold mounting base and a video showcasing the bottle production and handling process. - 4 sets available Rjdpfx Asxhg N Eeg Top - Price per set: €36,000 - Special price for four sets: €124,000 Main technical specifications: - Maximum product volume: 6 L - Maximum output (blow cycles): 700*2 stations/hour - Screw diameter: 90 mm - Screw length-to-diameter ratio (L/D): 24 - Plasticizing capacity: 150 kg/h - Maximum extruder die diameter: 200 mm - Distance between die heads: 250 mm - Mold thickness: 195~580 mm - Maximum mold flat surface dimensions (W x H): 450 x 580 mm - Clamping force: 160 kN - Machine dimensions (L x W x H): 5.2 m x 2.2 m x 2.2 m - Machine weight: 11,000 kg

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Rsdewa Rhrepfx Ag Tjp Vgrajena moč: 150 kW V kompletu kalupi za 1,5 L Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 32.886 h, Rabljeni stroj za izpihovanje plastenk KRONES Contiform S14, leto 2014 Predstavitev: Revolucioniranje polnilnih operacij Na področju tehnologije polnjenja izstopa rabljeni stroj za izpihovanje plastenk KRONES Contiform S14, izdelan leta 2014, kot vzor učinkovitosti in natančnosti. Razvit s strani podjetja Krones, ta rotacijski stroj postavlja nova merila v proizvodnji ter se ponaša z vrhunskimi funkcijami in zmogljivostmi. Inženirska odličnost: Pregled komponent V središču Contiform S14 se nahaja natančno zasnovana izpihovalna glava s 14 orodji (gnezdi), prilagojena različnim proizvodnim zahtevam. Ta konfiguracija omogoča optimalno izkoriščenost virov ob ohranjanju visoke izhodne zmogljivosti. Dopolnjuje jo impresivna delovna hitrost stroja, ki dosega do 28.000 plastenk na uro, kar potrjuje njegovo učinkovitost pri izpolnjevanju zahtevnih proizvodnih urnikov. Moč in zmogljivost: podrobnejši pogled na stroj za izpihovanje KRONES Contiform S14 Moč Contiform S14 izhaja iz robustnega izpihovalnega mehanizma, ki generira 266 kW sile za natančno in konstantno oblikovanje vsake plastenke. Integriran hladilni agregat s kapaciteto 13 kW zagotavlja stabilnost temperaturno občutljivih procesov in kakovost izdelkov skozi celoten proizvodni ciklus. Takšna natančnost izpostavlja Kronesovo zavezanost za zanesljive rešitve na področju polnilnih linij. Pretok in produktivnost: optimizacija proizvodnje Ključni del vsakega stroja za polnjenje je pretok, pri čemer je Contiform S14 izjemen z zmogljivostjo 1300 m³/h. Ta funkcionalnost omogoča nemoten proces materialov, zmanjšuje izpade in povečuje produktivnost — kar je še posebej pomembno za industrije z visokimi proizvodnimi zahtevami. Strukturna robustnost: zasnovan za dolgo življenjsko dobo Vzdržljivost je temeljna značilnost oblikovanja Contiform S14, kar potrjuje tudi njegova masa 25 ton. Masivna konstrukcija omogoča stabilnost med delovanjem in dolgo življenjsko dobo ter zmanjšuje vzdrževalne posege in stroške. Rotacijska zasnova stroja dodatno prispeva k zanesljivosti in omogoča neprekinjeno delovanje z minimalnimi izpadi. Električna učinkovitost: energijsko optimizirano delovanje Učinkovitost stroja se kaže tudi v njegovih električnih sistemih. Napaja se z napetostjo 400 V, frekvenco 6 Hz in tokom 337 A, s čimer optimizira porabo energije, zmanjšuje odvečno porabo in stroške delovanja. Energetska učinkovitost je ključna za trajnostne operacije, skladne z najnovejšimi okoljskimi standardi in predpisi. Trenutno stanje: pripravljen za vključitev v proizvodnjo Kljub svojim naprednim lastnostim je Contiform S14 trenutno v skladišču in čaka na implementacijo v proizvodnih obratih, ki želijo izboljšati svoje polnilne procese. Rjdpfx Ajvgu Ecsg Tep

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg Rodpfx Aokucxljg Tjp As-new condition

Stanje: rabljeno, Leto izdelave: 2002, Overview This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and is used for filling carbonated water and soft drinks into 1.5-liter PET bottles. The line offers a production capacity of up to 16,000 bottles per hour. It has been regularly maintained and is in good condition. Availability: End of August 2025. Technical Data Output: up to 16,000 bottles per hour (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short-neck and cap) Bottle material: PET Filler type: Isobaric filler Year of construction: between 1999 and 2007 (various machines) Closure type: Short-neck Label type: OPP (Contiroll) Scope of Supply 1 x Blowing machine CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing machine to labeller & filler Rjdpfx Agewzvl Se Tsp 1 x Labeller CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and soft drinks | approx. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and shrink tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Handle applicator TWIN PACK MDE INOX | 2003 | single lane, 45 packs/min Package transport to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet magazine with lift and transport 1 x Pallet stretch wrapper ROBOPAC GENESIS | 2002