Coordinate Measuring Machine

Zeiss UMM 550

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Dcodpfx Afeuz If Nswjp Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: pripravljen za uporabo (rabljen), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Wafios RB20 bending head, bending direction: left and right, max. total tool height: 78 mm, bending capacity: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeatability for bending, rotation and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, max. reach: 1611 mm, repeatability: +/-0.05 mm, weight: approx. 235 kg. Includes overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile operator panel, docking station and work table. Documentation available. On-site inspection possible. Dedowwlkijpfx Afwecp

Stanje: dober (rabljeno), Leto izdelave: 1991, x-axis travel 4000 mm Dcsdpfxsvwgmgo Afwop y-axis travel 2500 mm z-axis travel 1200 mm Control system: FIDIA M30 Spindle power: 37 kW Spindle speed: 4500 rpm Column clearance: 2300 mm Distance spindle to clamping surface: 1250 mm Tool holder: ISO SK-50 Table dimensions (longitudinal): 3000 mm Table dimensions (cross): 1500 mm The 5-axis portal milling machine Ingersoll-Bohle is in good condition and can be inspected by appointment with the seller. Accessories: - High-frequency spindle 3.8 kW with 25,000 rpm Description: - Infinitely adjustable angled milling head (spindle speed 4500 rpm)

Stanje: novo, Leto izdelave: 2024, Serija SJET – večnamenski industrijski pralniki delov, ki so izjemno enostavni za uporabo. Rotacijski pralnik z vrtljivo košaro. Pralnik delov z vrtljivo mizo. Idealni sistemi za pranje delov za razmaščevanje in vzdrževalno čiščenje. Način delovanja: Košara se po naložitvi vstavi v stroj, nato se na vrtljivo košaro razprši vroča voda, zmešana s čistilnim sredstvom. Posebno nameščene šobe iz nerjavečega jekla in rotacijsko gibanje košare zagotavljajo temeljito čiščenje vseh delov v košari. Pred vračanjem v rezervoar se voda filtrira, kar podaljšuje življenjsko dobo detergenta in zmanjšuje stroške. Dcedpfx Afed I Aw Eswjp Serija SJET zmanjšuje porabo vode in čistila ter prispeva k varovanju okolja. Pralniki SJET so izdelani iz nerjavečega jekla AISI 304. Na voljo so različne dimenzije in kapacitete košar. Na voljo sta tudi opciji izpiranja in sušenja. Možne so različne izvedbe pokrovov. Rotacijski pralnik z vrtljivo košaro. Za dodatne informacije in možnosti nas kontaktirajte.

Leto izdelave: 1990, stanje: rabljeno, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Refurbished: 2000 X-axis as longitudinally traversing portal: 850 mm Y-axis cross slide within portal: 1,200 mm Z-axis as measuring head quill (vertical) approx.: 600 mm Clearance between portal sides approx.: 1,000/1,080 mm Vertical clearance approx.: 750 mm Dcsdpfot Hwqksx Afwop Total table size approx.: 1,000 x 2,100 mm Table height above floor approx.: 850 mm Overall machine height approx.: 3,050 mm Weight approx.: 3,800 kg Special equipment / Accessories: – Granite plate as measuring table and crossbeam, vibration-dampened – Measuring 3D probe head for accommodating 5 different probe inserts and for SCANNING operation for continuous data acquisition, resolution 0.1 µm – Path control for 3 axes simultaneously – HEWLETT-PACKARD computer system H 382 with colour monitor, disk drive, keyboard, optional printer – ZEISS software as follows: UMESS 300/MFT 300 with extension package, revision 1998, as well as 302 Form and Position Inspection, 303 Fitting Functions, 305 Automatic Operation, 307 Parameter Ctrl. Manager, and options Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Bore Pattern Program A 741 and Probe Check 99 – Mobile manual control panel with progressive control lever for continuously adjustable travel speed of the 3 axes – Probe magazine mounted on the machine, equipped with 3 probes, with probe change-over facility – Separate control and switch cabinet Type 608485, separate computer desk, separate cabinet – Operating manuals, various measuring probes, and table-mountable calibration ball/standard

Stanje: novo, - with lateral discharge opening - with pneumatic soundproof cover - total volume 53 l - working volume approx. 40 l - dimensions approx. 790 x 415 x 670 mm (h) - working container dimensions approx. 590 x 290 x 290 mm (h) - drive power 0.55 kW - max. speed 1,500 rpm Dodpfx Afjd I Dpiowecp - PU-coated base approx. 10 mm - PU-coated side wall approx. 8 mm - total weight approx. 80 kg - including dosing pump - including control unit with variable speed control, 1,000 – 1,500 rpm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 500 mm, skupna višina: 2.700 mm, skupna dolžina: 3.800 mm, skupna širina: 2.350 mm, širina mize: 500 mm, dolžina mize: 750 mm, skupna masa: 9.500 kg, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 22, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Prodam: Strojna freza AXA DBZ – leto izdelave 2014. Nadzorni sistem Heidenhain iTNC 530 HSC. 2 obdelovalna prostora, velikosti 750x500. Petosna rotacijska miza, nameščena na eni mizi (z neprekinjenim gibanjem). Skladišče za 22 orodij SK40. Optični merilni sistemi na vseh osi. Sesalni sistem za odvajanje oljne megle. Izmetalnik sekancev. Visokotlačna črpalka. Zunanja postaja za filtriranje hladilne tekočine. Stroj je v delovnem stanju in pripravljen za testiranje. Garancija 3 mesece. Dodpoy D Enhefx Afwjcp Možnost namestitve in zagon pri stranki. Prilagojen za nihajno obdelavo (obdelava na eni mizi, nalaganje na drugi).

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height + 345mm, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible. Dedpewt Tk Nefx Afwocp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Producător: SIP Model: HYDROPTIC 6A Dcjdpfx Afjuxmlvjwep An fabricație: 1984 Dimensiunea mesei de lucru: 1100 x 842 mm Greutate maximă piesă pe masă: 1000 kg Număr, lățime și pas canale T masă: 8, 16, 105 mm Cursă transversală masă (X): 1000 mm Cursă longitudinală masă (Y): 795 mm Cursă verticală masă (Z): 800 mm Distanță maximă ax-masă: 1020 mm Distanță liberă între coloane: 1100 mm Putere motor arbore principal: 6 kW Alimentație: 400 V Greutate: 11300 kg

Stanje: rabljeno, Leto izdelave: 1987, x-travel 400 mm y-travel 250 mm Workpiece height 485 mm CNC control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4,000 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Table traverse (longitudinal/X) max. 400 mm Table traverse (cross/Y) max. 250 mm Vertical adjustment of grinding slide max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Clearance table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16 ° Grinding Ø (bore max.) approx. 230 mm 18 spindle speeds depending on spindle motor steplessly adjustable 4,500-80,000 rpm. Planetary speed (C-axis) steplessly adjustable 5-250 rpm U-axis, radial infeed 6 mm Total drive approx. 10 kW - 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with display, for 4 axes (= XYC + U-axis), with interpolation in 2 ½ dimensions (XYC). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly at the machine, with various subprograms, as well as manual movement of axes via control panel or electronic hand-held unit. Separate digital readout for the Z-axis • U-axis as manual and controlled radial feed axis on the grinding head, with digital readout for feed position, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • HI-Cut device (oil cooling) and automatic fire suppression system • Separately standing coolant unit with belt filter, separately standing hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock as inspected Dedpfx Afst Hw Txewecp Payment: strictly net - upon receipt of invoice