Rezkalni stroj s pomično kolono

ZAYER KCU 8000

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. Gsdpfjy Ehrxjx Aa Rjbw AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.250 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426, največja hitrost vretena: 2.500 obr/min, število osi: 5, Ta 5-osni vrtalni stroj TOS WHN 13.8 je bil izdelan leta 1996. Ima premer delovne vretena 130 mm, pomik po osi X 3500 mm, po osi Y 2000 mm in po osi Z 1250 mm. Površina vpenjalne plošče rotacijske mize meri 2200 x 1800 mm ter omogoča maksimalno maso obdelovanca do 12.000 kg. Če iščete visokokakovostno vrtalno napravo, upoštevajte TOS WHN 13.8, ki jo imamo na prodaj. Kontaktirajte nas za več informacij. Prednosti stroja Gbsdpfxsyar D Hj Aa Row Tehnične prednosti stroja: • Vpenjalna površina rotacijske mize: 2200 x 1800 mm Dodatne informacije Premer delovne vretena: 130 mm Tehnična specifikacija Stožec ISO 50

Leto izdelave: 2026, stanje: novo, We offer a wide selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines suitable for all types of products requiring pallet inversion or pallet exchange. Semi-automatic and fully automatic options are available. Gjdshmfctepfx Aa Rebw We deliver and install throughout the EU. Brand new machines.

Stanje: rabljeno, Leto izdelave: 2005, Večnamenski center za obdelavo stekla, INTERMAC tip Master 23, leto 2005 (1700 delovnih ur) Gbjdpfx Aaox Iuhro Rsw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 12.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 2.800 mm, položaj glave za glodanje: ASSE B 1°/ASSE C 3°, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 20 m/min, največja hitrost vretena: 4.000 obr/min, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, HEIDENHAIN iTNC530 številčno krmiljenje Samodejna dvoosna glava TBA4 1° + 3° z ozobljenjem HIRTH Hladilnik za olje glavnega vretena Gedozcfg Hjpfx Aa Rsbw Moč glavnega vretena 30 kW Maksimalni navor glavnega vretena 780 Nm Samodejni menjalec orodij s 61 mesti Premična operaterska platforma z vertikalnim hidravličnim pomikom Programabilno prilagodljivo krmiljenje Nadzor življenjske dobe orodja Verižni sistem za odvajanje ostružkov Hlajenje orodja z dovodom okoli vretena Delovna miza z dvema mizama STOLLE, skupnih dimenzij 12000 x 2500 mm 4 kotniki za delovno mizo, dimenzij 2500x1000x1200 mm CE oznaka in priročniki Glava TBA4 v celoti obnovljena pri EMCO MECOF

Stanje: dober (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 332046, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 2.200 mm, največja hitrost vretena: 850 obr/min, hitrost vretena (min.): 6 obr/min, hitrost pomika os X: 8 m/min, hitrost podajanja osi Y: 6 m/min, hitrost podajanja os Z: 1 m/min, skupna širina: 10.000 mm, skupna dolžina: 14.000 mm, skupna višina: 4.500 mm, premer vretena: 160 mm, obremenitev mize: 40.000 kg, dolžina mize: 3.000 mm, širina mize: 3.000 mm, teža obdelovanca (maks.): 40.000 kg, skupna masa: 71.000 kg, dolžina vrtalne vretena: 1.200 mm, leto zadnje generalne obnove: 2002, moč: 60 kW (81,58 KM), Ploščati vrtalni stroj s CNC rotacijsko mizo TDV5 za zahtevno obdelavo. Gjdouplptepfx Aa Rjbw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, SARATOV 5C280P – Spiralni stroj za obdelavo stožničnih zobnikov – 2 stroja Največji premer zobnika 800 mm Največji modul 16 Največja širina zobatega obroča 125 mm Število zob 5–150 Območje hitrosti vretena 20–125 vrt/min Moč glavnega motorja 7,5 kW Celotne dimenzije (D x Š x V) 3170 x 2180 x 2200 mm Teža 15 t Na voljo je video posnetek stroja v delovanju! SARATOV 5C276 – Stroj za obdelavo stožničnih zobnikov – ravno Modul, mm 10 Največji premer zobnika, mm 500 Največja razdalja med stožci zobnikov, mm 250 Največja širina zobatega obroča, mm 80 Najmanjši kot delilnega stožca (nagib), stopinje 5 Gbodpfjum Ez Rsx Aa Rsw Število zob: 10 – 150 Razdalja med vretenom in središčem stroja, mm – največ (nagib 5 stopinj) 375 mm; – najmanj (nagib 90 stopinj) 75 mm Hod, mm 100 Dvojni hod drsnika, udarov na minuto 48 – 400 Moč motorja, kW 4,0 Teža stroja, kg 8750

Leto izdelave: 1988, stanje: pripravljen za uporabo (rabljen), Travels X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10,000 rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11,000kg. Gsdpfxstpp H No Aa Robw

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Hydraulic press for die testing and adjustment Brand: MHG Godpfx Aask Sgvyo Rsbw Model: ER.2S.DM-300/2100 Serial no.: 927 Year: 2020 Required power: 40 kW Hydraulic oil: 1000 l reservoir + 200 l circuit fill Total number of cycles: 403 (AS-NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300 t Number of cylinders: 3 Maximum tooling dimensions: 1400 x 1400 mm Maximum tooling mass: 16,000 kg Maximum opening between fixed and moving tables: 1690 mm Minimum opening between fixed and moving tables: 960 mm Maximum stroke of moving table: 730 mm Approach speed: 92 mm/s Return speed: 93 mm/s Stop time: 0.2 s Safety distance: 500 mm Weight (empty tank): 35,000 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 132.900 km, barva: rdeča, vrsta prenosa: samodejen, gorivo: dizel, Leto izdelave: 2019, Naprodaj BMW Serije 1 116d v zelo dobrem stanju, z 132.900 km. Udoben in zanesljiv avtomobil. 🔹 Lastnosti: 132.900 km Tkaninska notranjost 4 vrata Rdeča barva Zelo dobro ohranjen Mehka in udobna vožnja Idealno za mestno vožnjo in daljša potovanja 🔹 Stanje Notranjost in zunanjost v zelo dobrem stanju. Gjdpszimhdofx Aa Rsbw