Center stružnica

XYZ Machine Tools 1550VS Centre Lathe

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: Chodpfx Aehhm Edjfqsf - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 5.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TPK-90/5M has undergone a comprehensive overhaul and modernization by us. It features technical specifications that correspond to the operating and technical documentation of a new machine, complies with WOT technical acceptance requirements, Polish standards, and also meets all EU directives. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: In stock, under power, ready for inspection at any time Technical specifications: - Distance between centers / Turning length: 5,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 Chsdpfx Afswk Iq Eeqsf - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 1,800 mm Height: 1,800 mm Total weight: 7,300 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment (available at extra cost): - 3- or 4-jaw chucks, various sizes and versions - Digital Read Out for 2 axes, incl. display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Cjdew Dcccjpfx Afqjhf

Stanje: novo, The KNUTH Sinus 400/1500 D is a robust universal lathe in the category of conventional lathes, renowned for its high machining efficiency. Featuring a one-piece, heavy cast iron bed and a spindle bore of 105 mm, this machine is ideal for machining long workpieces or large flanges. Technical highlights include a removable gap bridge for workpieces with diameters up to 1035 mm, high precision and smooth operation, as well as rapid traverse on two axes for quick positioning. Safety features such as overload protection and the automatic lubrication of the main spindle ensure reliable operation. The manual design provides a direct power transmission between the motor and the spindle, enhancing performance. If you are interested in the Sinus 400/1500 D, you can now submit an inquiry or obtain further information about this universal lathe in the category of conventional lathes. Cjdpfx Asq Rdp Aefqohf

Stanje: novo, Parallel lathe with Fervi T075/400V3A digital readout. Monobloc cast iron bed. Centre height: 230 mm Max. swing over bed: 460 mm Max. swing over carriage: 270 mm Max. swing in gap: 690 mm Tool height: 25 mm Distance between centres: 1500 mm Distance between guides: 300 mm Spindle bore taper: MT7 Spindle bore: 58 mm Spindle nose: Camlock D1-8 Spindle speeds (12): 25–1700 rpm Longitudinal feeds (42): 0.031–1.7 mm/rev Cross feeds (42): 0.014–0.784 mm/rev Metric threads (41): 0.1–14 mm Inch threads (60): 2–112 TPI Tailstock quill stroke: 130 mm Tailstock taper: MT4 Motor: 400 V 50 Hz 5.5 kW Coolant pump: 400 V 50 Hz 90 W Machine dimensions: 2750 x 1080 x 1370 mm Net weight: 2020 kg Total dimensions: 2870 x 1180 x 1570 mm Gross weight: 2200 kg Included accessories: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Faceplate Ø350 mm Fixed stead rest Travelling (follow) steady rest Reducing sleeve MT 7/4 Fixed tailstock centre MT 4 Rotating tailstock centre MT 4 Threading dial indicator Quick-change tool post guard Spindle guard Rear splash guard Type B quick-change tool post LED light Coolant system Electromechanical foot brake Carriage gears in oil bath Chjdpfx Afjvbqv Hoqef Rapid-lock tailstock carriage

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 390 mm, višina središča: 310 mm, skupna masa: 61 kg, vhodna napetost: 230 V, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 3.500 obr/min, nosilec vretena: MK 2, moč: 0,75 kW (1,02 KM), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast tool rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Edge of the tool rest made from hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejection pin and key for securing the faceplate. • Pre-drilled holes for headstock lighting. • Simple assembly of accessories: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! The mid-size LAGUNA 1216 wood lathe is distinguished by its robust components: cast-iron headstock, tailstock, precisely ground bed, and tool rest with a hardened steel edge for increased durability. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50–525, 325–1750, 650–3500 rpm. Infinitely variable speed control via the Duralumin dial, and switching between three gearing ranges using a simple lever mechanism. The advanced motor technology ensures high torque, even at low speeds. Tailstock locking at the rear: unobtrusive during operation but always within easy reach. Ergonomic handles with eccentric locking for secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50–525, 325–1750, 650–3500 rpm • Max. working diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock bore: 17 / 17 mm • Quill travel: 63 mm • Tool rest post diameter: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm Chsdpfxjtuuv Ne Afqef • Weight: 56.3 kg • Dimensions including packaging: 750 × 226 × 442 mm • Shipping weight: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Drive center • Live center • Faceplate • Tool rest • Ejection pin with brass tip • Spindle locking key

Stanje: novo, Parallel lathe with clutch and digital readout Fervi T085F10, featuring a mechanical clutch, 3-axis digital readout, and semi-Norton gearbox. Available with 2000 mm and 3000 mm center distances as well. EQUIPPED WITH MECHANICAL CLUTCH, 3-AXIS DIGITAL READOUT, AND SEMI-NORTON GEARBOX. FITTED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. BUILT ON A ONE-PIECE CAST IRON BASE. Technical data: - Center height: 280 mm - Max swing over bed: 560 mm - Max swing over carriage: 360 mm - Max swing in gap: 770 mm - Tool height: 32 mm - Distance between centers: 1000 mm - Spindle bore: 105 mm - Spindle mount: Camlock D1-8 - Spindle speeds (12): 36 - 1600 rpm - Longitudinal feeds: 0.063 - 2.52 mm/rev - Cross feeds: 0.027 - 1.07 mm/rev - Metric threads (22): 1 - 14 mm - Inch threads (26): 2 - 28 TPI - Tailstock taper: MT 5 - Motor: 400V 50/60 Hz, 7.5 kW - Coolant pump: 400V 50/60 Hz, 90 W - Dimensions: 2500 x 1400 x 1500 mm - Net weight: 2920 kg - Gross weight: 3555 kg Included accessories: - 3-jaw self-centering chuck Ø 320 mm with reversible jaws - 4-jaw independent chuck Ø 400 mm - Faceplate Ø 600 mm - Travelling steady Chjdpevbquiofx Afqjf - Fixed steady - MT 5 live center - Thread chasing dial - Leadscrew guard - Tool post guard - Spindle guard - Rear splash guard - Quick-change tool post type C - LED lamp - Coolant system - Electro-mechanical foot brake - Quick-locking tailstock carriage - Carriage gears in oil bath - Adjustable leveling feet

Stanje: novo, TC 205 x 1000 CVS Exhibition machine, color blue Technical Data: Swing over bed: 410 mm Chjdpjvzmtzjfx Afqjf Centre height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 - 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting imperial: 2 - 72 T.P.I Thread cutting metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Main motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splashguard rear panel - 4-way tool post - Foot brake - Emergency stop switch - Coolant system - Chip tray - Fixed centre - Change gear set - Reducing bush for main spindle - Machine pads - Service tools - Operating manual

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, višina središča: 165 mm, širina na sredini: 635 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 30 obr/min, skupna masa: 900 kg, Dear Sir or Madam, For sale is a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully functional and can be inspected and tested on site. Availability: immediately Centre distance: 635 mm Chodsu St S Aopfx Afqof Centre height over bed: 165 mm Centre height over cross slide: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required floor space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Stanje: novo, ELMAG INDUSTRIE 1000/230 HD Universal Gap Bed Lathe with Leadscrew and Feed Shaft 88173 Includes RÖHM chuck Includes 3-axis digital position display Includes quick-change tool post set, Multifix system Ready to operate: includes oil filling, cleaned of preservative (degreased), fully assembled, and tested Heavy-duty gap bed lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models is apparent from the moment you switch them on: barely audible drive noise. No vibrations even with heavy cutting depths. Indeed, the 230 HD models—at 2,635, 2,835, and 3,055 kg—are the heaviest in their class and, with their extremely robust construction, e.g. induction-hardened bed ways, are perfectly suited for heavy-duty and continuous operation. The 230 HD offers an extra-large spindle bore at 80 mm for working with bar stock up to 2 1/2" (76.1 mm) in diameter. A swing over cross slide of Ø 290 x 1,000, 1,500, or 2,000 mm and a maximum swing diameter of 460 or 700 mm meet virtually all demands in mechanical engineering, steel fabrication, plant construction, and toolmaking. Also features 12 spindle speeds, 170 longitudinal and cross feeds, and 150 leadscrew thread pitches for both metric and imperial threads. Standard equipment: - Digital position display included - RÖHM three-jaw chuck Ø 250 mm - Four-jaw independent chuck Ø 315 mm - Face plate Ø 350 mm - 2 fixed centering points - Live center MT 5 - Travelling steady - Fixed steady - 5-piece quick-change toolpost set, type MB - Thread dial indicator - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety interlock - Machine base / chip tray / splash guard - Tool kit / operation manual / CE Optional accessories: - Indexable insert turning tool set 25 x 25 mm, 7-piece - Indexable insert set, 7-piece for 25 x 25 mm turning tool set - 'Camlock' turning tool set 25 x 25 mm, 7-piece - Parting tool holder 25 x 25 mm, length 150 mm - Blade for parting tool holder 25 x 25 mm ADVANTAGES: - CE-compliant machines with highest level of safety and machine accuracy to DIN standards - Powerful and robust – suitable for commercial and industrial use - Integrated coolant tank and pump in machine base TECHNICAL DATA: Distance between centers 1000 mm Center height 230 mm Max swing over bed 460 mm Max swing over cross slide 290 mm Max swing without bridge 700 mm Bed width 340 mm Bridge length 200 mm Travel of cross slide 280 mm Travel of top slide 100 mm Max turning tool section 25x25 mm Chuck mount D1 - 8 Spindle fitting (turning spindle) MT 7 Spindle bore 80 mm Spindle speed range 25 - 1800 rpm Chsdpfx Ajtw Dxkofqof Number of speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Cross feeds (170) 0.02 - 1.23 mm/rev Metric thread pitches (24) 0.5 - 20 mm Metric module pitches (20) 0.25 - 10 mm Imperial threads, TPI (61) 1-5/8 - 72 TPI Imperial module threads, TPI (45) 3-1/4 - 96 TPI Lead screw pitch 6 mm Lead screw diameter 40 mm Tailstock taper MT 5 Tailstock diameter 75 mm Tailstock stroke 130 mm Main motor power 5500 W Coolant pump 40 W Power supply 400/50 V/Hz Total length 2310 mm Total height 1255 mm Weight 2635 kg