Škarjasta dvižna miza

WTT Fördertechnik E 05.08.5.1.0.RB

Stanje: rabljeno, Leto izdelave: 1978, Drilling capacity in steel (diameter) 40 mm Throat depth 345 mm Quill stroke 200 mm Table clamping surface 720 x 560 mm Spindle speed 60 - 765 rpm Feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Tool holder MT 4 Total power requirement 3.0 kW Machine weight approx. 0.4 t Cjdsv Ehftepfx Afqerk Drilling machine equipped with: Feed 2 gear stages Forward/reverse operation Foot switch Coolant pump Machine lamp

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick Cjdpjiidm Nofx Afqork - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa Csdequ N U Dspfx Afqork 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: rabljeno, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Nominal load capacity: 1,500 kg Lifting capacity (practically tested): 1,000 kg (at approx. 350 bar) Platform dimensions: 2,100 x 1,400 mm Lift stroke: max. 930 mm Installation height (lowered): 100 mm (with mounting frame) Installation height (raised): 1,030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1,000 kg Hydraulic motor power: 1.5 kW Cjdpfjl Nbqcox Afqerk Electrical connection: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop the lowering process when the safety edge is actuated - No hydraulic power unit included - No electrical controls included Mounting frame length: 2,270 mm Mounting frame width: 1,580 mm Mounting frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition

Stanje: rabljeno, Leto izdelave: 2017, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Plasma cutting system: HEZINGER PlasmaLine EPJ / ECKERT including extraction unit PFC-4 Plus 4kW F3800 Technical specifications HYPERTHERM Powermax 125 plasma cutting unit: Cutting capacity: Recommended: 38 mm Maximum: 44 mm Severance cut: 57 mm Output current: 30–125 A Power supply: 400 V, 36 A Compressed air requirement: 260 l/min Air pressure: 5.9 bar Dimensions: 592 x 274 x 508 mm Weight: 49 kg Csdpfoucpnlsx Afqork

Stanje: novo, Maximum welding current: 70 A Maximum cutting capacity: 25 mm Open-circuit voltage: 120 V Minimum compressed air connection: 4 bar Cjdowfyq Hopfx Afqjrk Connected load: 9.2 kW Operating voltage: 400 V Weight: 0.28 kg Dimensions (L x W x H): 1.7 x 1.0 x 1.2 mm Plasma cutting machine with cutting table, type CEBORA Axial 607 Including additional hose package

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, širina valja: 700 mm, skupna širina: 800 mm, skupna dolžina: 2.600 mm, moč: 1,5 kW (2,04 KM), 2 WTT materials handling equipment – hydraulic scissor lift tables with powered roller conveyor. Type: E.20.16.8.2.0.RB Length: 2,600 mm Width: 800 mm Cjdpfx Aouyhltefqjrk Roller width: 700 mm Load capacity per unit: 2,000 kg Max. lifting height: 2,000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, 2 pcs. ZIMZ scissor lift platform/lift table/scissor hoist with undercarriage Load capacity: 1000 kg Hydraulic operation Roller conveyor length: 2500 mm Entry height on roller conveyor (in transfer area): 280 mm Max. lifting height: 1100 mm Usable lift: 800 mm With pneumatic brake for rollers With rails Foot protection contact strips (safety edging) Overall dimensions: length 2500 mm, width 615 mm, height 280 mm Integrated hydraulic power unit Operating voltage: 400V, 50 Hz Price per unit Credpfxsv Dycho Afqjk