Stroj za brušenje jekla

WMW nicht bekannt

Stanje: rabljeno, Technical details: Height above floor: 930 mm Machine weight approx.: 75 kg (+ 27 kg base frame) Dimensions (L x W x H): 0.6 x 0.48 x 0.43 m EDGE BEVELING MACHINE Application: For beveling Machine table (W x D): 600 x 240 mm with guide rail (L x H): 400 x 25 mm Installed tool: Cutter approx. 50 mm with 45° milling profile Bevel width: approx. 6 mm Voltage: 380 V Lhodeu Ngdtjpfx Al Nef with ON/OFF switch

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 29 kg Total power requirement: 0.25 kW Circular Saw Blade Sharpening Machine SBS 8-70 - Saw blade diameter: 80 - 700 mm - Saw blade holder swivel: -30° to +45° - Grinding angle: -20° to +20° Lodpfx Aov A Hhhel Nshf - Speed: 2850 rpm - Grinding wheel dimensions: 125 x 10 x 32 mm - Motor: 250 W - Connection: 230 V / 50 Hz - Weight: 29 kg Scope of delivery: - Diamond grinding wheel for carbide-tipped circular saw blades - Cast iron base for increased precision - Rubber feet for vibration dampening and quiet operation - Spacer rings for different saw blade bores

Stanje: rabljeno, Tehnične podrobnosti: Ledpfxsu Ng Edo Al Nshf Premer brusilne plošče: 240 mm Premer žaginega lista: 600 mm Skupna potrebna moč: 1,1 + (0,37 kW) kW Približna teža stroja: 600 kg STROJ ZA BRUSENJE ŽAGINIH LISTOV Stroj izvaja brusilni postopek samodejno Žagin list se pomika mehansko Največji Ø brusne plošče: 240 mm Pogon za podajanje (0,37 kW) Stroj je mogoče demonstrirati i.D.

Stanje: rabljeno, Technical Details: Travel path - Y: Slide on beam: 200 mm Spindle mount ISO: SK 40 Spindle head tiltable left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table - spindle bottom end: min./max.: 50 / 400 mm Table clamping surface (mounting area): 760 x 200 mm Table clamping surface (clamping area): 630 x 200 mm Max. table load: 100 kg X travel: table longitudinal: 320 mm Z travel: table vertical: 350 mm Table tiltable +/-: left/right 30° each Distance table - spindle bottom end: min./max.: 50 / 400 mm Feed:: Table: stepless 14 - 71 mm/min Total power consumption: 4.0 kW Approx. weight: 1,200 kg Machine dimensions (LxWxH): 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital position display for X and Y. Lhodju Ndb Aopfx Al Nsf Swiveling working spindle. The feed is driven via a variator gearbox. The table is tiltable. Spindle speeds have 3 mechanical gear steps and 2 electrical steps. Coolant system. The milling beam is extendable by approx. 350 mm. The machine vise is a recommendation and is not included in the scope of delivery. It can be purchased optionally.

Stanje: rabljeno, Profilna brusilnica WICKMAN OPG Lhsdpfx Ajxbt Dpol Njf

Stanje: novo, Grinding range: 2 - 13 mm Point angle min./max.: 90 - 140 degrees Lhjdoupxdqopfx Al Nsf Connected load: 230 V Machine weight: approx. 10 kg Space requirement: approx. 0.35 x 0.2 x 0.2 m

Stanje: dober (rabljeno), x-travel 400 mm y-travel 375 mm z-travel 250 mm Table size 205 x 800 mm T-slots 4 x 45/14 H7 Spindle speeds 50 - 3150 rpm Tool holder 40 ISO Quill stroke 50.0 mm Feeds X & Z axes 5.0 - 1000 mm/min Feed Y axis 5.0 - 670 mm/min Rapid traverse 2.4 / 1.6 m/min Control system Heidenhain Total power requirement 5.1 kW Lhedpfx Alsxl E Sye Nsf Weight 950 kg Dimensions (L x W x H) 1860 x 1790 x 1750 mm From a training workshop (vocational school) Well-maintained condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN positioning/contouring control "TNC 135" * 3-axis manual input control * Programmable by machine operator * Practical and simple operation - Electro-motorised feeds on all axes (X/Z/Y) * X and Z axes: 5.0 - 1000 mm/min with rapid traverse 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse 1.6 m/min - Swivelling milling head in both directions - Tilting T-slot universal table - Vertical clamping area - Infinitely variable spindle speed adjustment - Manually extendable quill - Hardened and ground guideways - Electro-hydraulic tool clamping - Coolant system - Front coolant drip tray - Operating manual

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), used T-slot angle plate Lhjdpfsgwxmxox Al Njf Technical data: Dimensions Height: 1120 mm Width: 320 mm Slot width: 20 mm with - 7 horizontal T-slots used, in good condition

Stanje: zelo dobro (rabljeno), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment/Accessories: - Heidenhain 3-axis Aktiv digital display, Type TNC 113 - Infinitely variable feed on X, Y and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head tiltable and extendable 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication - Machine vise - Various tool holders/collets/tools Required installation space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos showing the geometry can be provided upon request. Lhsdpfx Ajyll A Tsl Nef Backlash Y-axis: 0.1mm Backlash X-axis: 0.2mm Backlash Z-axis: 0.15mm Runout horizontal spindle: 0.001mm Runout vertical spindle: 0.001mm Deviation parallelism Y-axis: 0.002mm (measuring length 150mm) Deviation parallelism X-axis: 0.01mm (measuring length 300mm) Videos demonstrating the geometry measurement can be provided upon request. The following parts have been renewed: - Gears in the horizontal head replaced and gear shaft newly mounted - New guide cover Z-axis + various add-on parts - Machine reconditioned - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Grinding diameter min/max: Mounting: Ø 200 x 32 mm Spindle speed: 3000 rpm Total power requirement: approx. 1.2 kW Machine weight approx.: 0.24 t Machine dimensions (LxWxH): approx. 0.7 x 0.9 x 1.6 m The grinding spindle is equipped with two hand levers: Lodpou Ng Ncofx Al Nehf - Left working area: Manual grinding device for small shank drills, grinding wheel currently Ø 120 x 30 mm; mounting Ø 32 mm; speed 3000 rpm; with grinding rest - Right working area: Pivoting device for tapered shank drills; cup grinding wheel currently Ø 160 x 30 mm; mounting Ø 32 mm; speed 3000 rpm Cutting angle for two-fluted drills max. 180° and for three-fluted drills 120° Relief angle: 5°–9°; Drill Ø 8–40 mm, possible grinding types include: standard grind, cross-point grind, centering grind, spiral grind, step drill grind Machine lighting available