Ravnalni brusilnik

OKAMOTO ACC 450 AV

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Duodpfx Asu Sbkgeplot Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 Dsdpfx Aeylw Stspljut • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Dodpfxsuyk N Ij Apleut

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard Duodpfx Ajlxyp Hopljt CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear Feed Unit Waveline 60 Basic Measuring range: 60 mm Resolution: 0.014 µm Measuring Column Wavelift 400 CNC Travel: 400 mm Positioning repeatability: < 10 µm Machine Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Full enclosure with electrically operated roller shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece holding plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurement  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard stone plate  Documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 510 mm, premer struženja: 300 mm, izvrtina vretena: 61 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 560 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – Year of Manufacture 2019 – Excellent Condition, Ready for Operation! For sale is a Doosan LYNX 2100LMA CNC turning center, a high-performance machine for the precise machining of rotational parts such as shafts, cones, spheres, as well as internal and external threads. The machine is in excellent technical condition, available immediately, and ready for inspection. Key features: - High precision and reliability for both series and single-part production - Large turret with 24 tool stations (including driven tools) - Control system: SIEMENS Sinumerik 828D - Powerful spindle and driven tools for maximum productivity - Spindle bore diameter of 61 mm enables the machining of a wide range of workpieces Technical specifications: - Year of manufacture: 2019 - Max. turning length: 510 mm - Max. turning diameter: 300 mm - X-axis travel: 210 mm - Z-axis travel: 560 mm - Swing over bed: 600 mm - Swing over tailstock: 400 mm - Spindle bore: 61 mm - Max. bar diameter: 51 mm - Max. spindle speed: 6000 rpm Duodeyftatspfx Aplot - Number of turret tools: 24 (including driven tools) - Control system: SIEMENS Sinumerik 828D - Dimensions (L x W x H): 2805 x 1582 x 1693 mm - Weight: 3500 kg The machine is fully operational, currently connected to power, and available for viewing.

Stanje: novo, moč: 90 kW (122,37 KM), Leto izdelave: 2026, Dvovretenski drobilnik s kladivom je vrsta drobilnika, pri kateri sta na eni osi nameščena dva rotorja, ki skupaj tvorita vrteči se rotor. Dvovretenska zasnova izboljšuje zmogljivosti drobljenja ter zagotavlja bolj učinkovito in zanesljivo rešitev v primerjavi z enovretenskimi drobilniki. Ključne lastnosti in značilnosti dvovretenskega drobilnika s kladivom: Djdpfeq Nf Enox Apljut 1. Dva rotorja: Kot že ime pove, ima drobilnik dva rotorja, ki se vrtita v nasprotnih smereh na skupni osi. Ta konfiguracija omogoča večjo silo udarca in večjo moč drobljenja. 2. Visoka zmogljivost: Zaradi dvojnega rotorja lahko drobilnik obdela večje vhodne kose in zagotavlja večjo kapaciteto kot drobilniki z enim rotorjem. Primeren je za drobljenje materialov z visoko trdoto in velikimi dimenzijami. 3. Večnamenskost: Dvovretenski drobilniki s kladivom so vsestranski in se uporabljajo v različnih panogah, kot so redukcija apnenca, sadre, premoga in drugih podobnih materialov v rudarstvu, cementni in gradbeni industriji. 4. Drobljenje z udarcem: Glavni mehanizem drobljenja je udarec kladiv ob material. Material se dovaja v drobilnik, kjer ga hitro vrteča se kladiva razbijejo in razdrobijo. 5. Nastavljiva režna odprtina: Ti drobilniki pogosto omogočajo nastavljanje reže med rotorji in udarnimi ploščami, kar omogoča nadzor nad končno velikostjo zrn. 6. Trpežnost: Robustna konstrukcija omogoča dolgotrajno uporabo pri težkih materialih in neprekinjenem obratovanju. 7. Manjša obraba: Dvojni rotor omogoča bolj enakomerno porazdelitev obrabe med kladiva in druge obrabne dele, kar lahko podaljša življenjsko dobo drobilnika. Tipične tehnične specifikacije: (Podatki se lahko razlikujejo glede na proizvajalca – navedene so standardne vrednosti za industrijske modele): Model (velikost rotorja), Maks. vhodna velikost, Izhodna velikost, Kapaciteta (t/h), Skupna moč motorjev 600 × 400, ≤110 mm, ≤3 mm, 10 – 15, 18,5+18,5 kW 800 × 600, ≤120 mm, ≤3 mm, 40 – 50, 45+45 kW 800 × 800, ≤180 mm, ≤3 mm, 50 – 60, 45+55 kW 1000 × 800, ≤180 mm, ≤3 mm, 70 – 80, 75+55 kW 1100 × 1000, ≤200 mm, ≤3 mm, 70 – 100, 90+110 kW 1400 × 1200, ≤200 mm, ≤3 mm, 90 – 110, 132+160 kW Za dodatne informacije o dvostopenjskem drobilniku s kladivom oziroma drobilniku z dvema rotorjema nam pošljite sporočilo – naša ekipa vam bo odgovorila v najkrajšem možnem času.

Stanje: novo, Univerzalni rezkalni stroj Znamka: OPTimill Model: MT 50 Kataloška št.: 3336005 Stanje: Nov stroj Hodi: - X-os: 580 mm - Y-os: 200 mm - Z-os: 340 mm Serijsko opremljen z: - 3-osni digitalni prikaz DPA 31 PLUS - Avtomatski pomik v osi X - Dolg rezkalni trn 16 mm - Dolg rezkalni trn 22 mm - Vpenjalna glava B 18 - Zobata vrtalna glava 3-16 mm/B 18 - Redukcijska puša MK 2 z izmetno režo - Redukcijska puša MK 3 z izmetno režo - Strojna svetilka - Hladilni sistem - Orodje za upravljanje Djdpfebnfxusx Apleut - Navodila za uporabo

Stanje: novo, Leto izdelave: 2026, Swing diameter over bed 554 mm Swing diameter over cross slide 370 mm Turning length 2000 mm Centre height 280 mm Spindle bore 104 mm Drive power 11 kW - New machine - Dujdpfxowyd Tns Aplst with 2-axis ACU-RITE digital readout including constant cutting speed, MULTIFIX quick-change tool post size MC * For more information about the exact standard specification and available options, please visit our website or contact us directly *

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Duedpfx Aofg Rlcoplst Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Duodpjywtwwsfx Aplet Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360