Miza za vpenjanje

WMW 600 x 400 mm T-Nut 12 mm

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Podpfx Aledkdi Tetsgp

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), 2 kosu centrifugalnih črpalk Proizvajalec: KSB Model: WKF 50/7 Pretok: 5,5 l/s (19,8 m³/h) Dvižna višina: 214 metrov (21,4 bar) Maks. temperatura: 130°C Tesnilo: Mehansko tesnilo z priključkom za zaporno vodo Elektromotor: VEM Pogonska moč: 30 kW Pgedpeibwarofx Altjp Hitrost vrtenja: 2935 obr/min ! Cena na kos !

Leto izdelave: 1990, stanje: rabljeno, Material: Mild steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Pgsdegb D Irjpfx Altep Unladen weight: approx. 1500 kg Delivery rate: 14.4 m³/h Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Stroke rate: 326 1/min, Stroke length: 105 mm

Stanje: rabljeno, Gear milling cutter Module 8 20 degrees Length: 1800 mm Podpfsdklt Nex Altjgp Diameter: 120 mm Bore: 40 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm Pgsdpfeh Ek Dajx Altop = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° Pjdpfjd Nt Rqex Altogp - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: zelo dobro (rabljeno), Welding positioner Focker Strähler 8 tons - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted to center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm Pgedof Ezdnjpfx Altep - Condition: visually and technically impeccable, runs very quietly

Stanje: rabljeno, Leto izdelave: 1982, Tehnične podrobnosti: Premer planske plošče: 2600 mm Premer struženja nad podporo: 2500 mm Dolžina struženja: - mm Razdalja med konicama: 1600 mm Premer struženja nad ležiščem: 2900 mm Vretensko izvrtina: 100 mm Število vrtljajev: prestave – obr./min Področje pomika: vzdolžno struženje 0,12–31,5 mm/min, čelno struženje 0,12–45 mm/min Dolžina vodil postelje: 2900 mm Največja teža obdelovanca med konicama: 400.000 kg Skupna potrebna moč: 45 kW Skupna teža stroja (vsi sestavni deli skupaj): pribl. 29,0 t Podpfx Aowtctyjltjgp Dimenzije stroja D x Š x V: 5,2 x 5,0 x 3,1 m 3-osni merilni sistem z digitalnim prikazovalnikom RSF-Elektronik Upravna plošča Hladilna enota za krmilno omaro Rittal

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, Welding Positioner Heinrichsglück 15 Ton Load Capacity Condition: as new Complete with accessories: hand remote control, foot remote control, manual, documentation, electrical diagrams – everything available Specifications: Pgedpfx Alohcbmpetop - Clamping plate diameter: 2200 mm - Height (tilted to center): 1450 mm - Height (horizontal): 1800 mm - Rotation speed: 0.025 to 1.1 rpm - Tilting range: 0 to 135° - Length: 3400 mm - Width: 1800 mm plus 300 mm - Net weight: 8000 kg

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 90030003, Table size: 500 x 1200 mm Travel X-axis: 1000 mm Travel Y-axis: 550 mm Travel Z-axis: 600 mm Spindle taper: ISO 40 Spindle speeds: 60 – 2700 rpm Podpfe Npwfox Altjgp Spindle drive power: 10 kW Electrical connection: 380 V, 20 kVA Required space: 3200 x 2800 x 2650 mm Weight: 7.3 t