Stroj za parket

Wintersteiger DSG 200 (Steuerung Neu)

Stanje: dober (rabljeno), Leto izdelave: 2016, Kupujem večlistno žago slovenskega proizvajalca MEBOR VR900. Fpedpfxsxxgy Ss Afljb Višina reza pod rezilom 160 mm / možnost nastavitve. Širina reza na transportnem kolesu največ 900 mm. 1 kos premično žagin list z laserjem. Premer glavnega žaginega lista 300–500 mm. Motor 55 kW. Skupna teža cca 4000 kg. Vključno z žaginimi listi in distančnimi obroči. Stroj je na zalogi v Kežmaroku, Slovaška. Takoj na voljo.

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Fjdpfx Ajhw Ng Iefljpb Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Fsdpfx Afjd Rzc Rolopb Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: zelo dobro (rabljeno), Kotel Buderus SB 625 -185kw Fpjdpfx Aeu I Rx Ssfljb

Stanje: potreben popravila (rabljeno), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 SP. 150 mm Fjdon R Dihopfx Aflspb Composition: - LOADER - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 SP. 150 mm - GRAVITY ROLLER UNLOADER, 3000x1300 mm Press platen dimensions: 3000x1300 mm Pressing pistons: No. 6, Ø 70 mm, stroke 200 mm Pressing force: 70 t

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Fodpfx Asw Dp Ufsflopb Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output Fpjdpfxswhmdfe Aflsb 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: generalkompletno obnovljen (rabljeno), VERSCHIEDENE MOTORTYPEN UND SCHLITTEN FÜR CELASCHI DET GEBRAUCHT, KOMPLETT GENERALÜBERHOLT Fpjdsdvlcyspfx Afleb

Stanje: rabljeno, Leto izdelave: 2015, POWER PC 85 + WOODWOP 6.0 nadzor (posodobljeno 2023) Delovne dimenzije: 3050 x 850 mm Delovna debelina: 12–60 mm Vrtalna glava z 19 neodvisnimi vreteni, razporejenimi, kot sledi: – 8 vertikalnih vreten na osi X – 5 vertikalnih vreten na osi Y – 4 horizontalna vretena na osi X – 2 horizontalna vretena na osi Y 1 3-osni vertikalni rezkalni stroj z avtomatsko menjavo orodij 4-kratni avtomatski menjalnik orodij 1 integrirana enota z žaginim listom – premer: 100 mm Skupna moč: 12 kW Teža: 1450 kg Fodpfx Asxp Rqioflepb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Fedpsph Uk Njfx Afljpb Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)