Stiskalnica za lepljenje

WINTER UHL-6200-150

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off Chjdpfx Afsvu Hghsqef NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: dober (rabljeno), Slotting saw blades, window milling tool, indexable inserts, window construction tool - Slotting saw blades, milling tool for: wooden windows - Dufix: No./Var 46616 - Bore: Ø 50 mm - Weight: 6.8 kg Chodpfx Afeb A Np Njqef

Stanje: zelo dobro (rabljeno), Block Gluing Press STROMAB SL2-6000 Gluing length: 6000 mm Gluing height: 1200 mm Maximum gluing width: 200 mm Number of vertical hydraulic clamps: 12 Number of frontal clamps: 6 Cylinder diameter: 70 mm Vertical cylinder pressure: 7300 kg Codpfowzg Scox Afqjhf CE Certificate Operating and Maintenance Documentation (DTR)

Stanje: rabljeno, tenoning and mortising machine, tenon cutter, tenon slotter, mortise rotor, tenon and mortise machine, mortising and tenoning milling machine - Manufacturer: Festo, tenon and mortise machine - Model: ZA 101/S - Technical data: see type plates/photos Cedpfx Aof D H E Nefqshf - Dimensions: 1675/1545/H1330 mm - Weight: 546 kg

Stanje: dober (rabljeno), Gold / Stehle / Fantacci / Leitz Chjdeixtudspfx Afqof Window manufacturing tools used various types available upon request

Stanje: novo, Koda: N0015 Znamka: RESCO Model: TENONE Cjdod Ezquopfx Afqjhf Orodja za čepařski stroj (stroj za izdelavo čepov) Št. 4 skupine, premer 300 mm, Z=4, F.50

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine Chjdpfx Afov Tb Hgoqef WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, CMB SFR 4500×200 Frame Press Codpov Scz Ajfx Afqohf Working length: 4500 mm Working width: 200 mm Working height: 1200 mm Number of vertical clamps: 9 Number of frontal clamps: 4 Operating pressure: 250 bar Hydraulic pump motor: 1.5 kW Weight: approx. 2500 kg

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Overview ----- 1. Cross-cut saw ----- Cross-cut saw pneumatic, with 8-position revolver stop Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for saw cut detection Manual length stop 4,100 mm 1. Tenoning and slotting spindle ----- Codjxvtggepfx Afqohf Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle – same direction spindle (climb & counter-climb) ----- Position: vertical right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 pcs Spindle speed: 6,000 rpm Spindle diameter: 40 mm Max. tool swing diameter: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bar saw, horizontally and vertically indexed ----- Position: horizontal, top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial indexing: 2 positions Radial indexing: 2 positions Additional Features ----- Sash rebating unit for tear-free rebating Twin workpiece package Return conveyor for single-operator handling at working height: swivel tray Screen control: 99 programs Tilting window device Electronic angle display for tilted windows INCLUDES window tooling OPPOLD, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Sale of tools as currently equipped, as is, with existing accessories. Note on window profiles, tool drawings, and tool system lists: Engelfried GmbH does not warrant that the actual tools correspond with the specified and illustrated systems. (Technical details as per manufacturer – no guarantee!)

Stanje: rabljeno, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 Technical Data Summary (Please inquire for additionally included accessories) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for saw cut detection Length stop CNC-controlled ----- > Length: 3,500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenoning and grooving spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. cutting circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and counter-rotating) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the machining of narrow, short parts (e.g. glazing bar components) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 5: Horizontal top profiling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutting circle: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. cutting circle: 210 mm > Motor power: 3.0 kW Chjdpfx Afoxtvgkjqjf Additional Features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Sash forming device for tear-free sashes > Double-piece package > Return conveyor for single-operator use: swing belt > Screen control > Angle sash window device > Electronic angle display for sash windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Cross-cut saw: 80 mm Grooving spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving device from...