Štiristranski skobeljnik

WINTER Profimax 4-20

Stanje: zelo dobro (rabljeno), Catalogue number: 6393 TECHNICAL DATA - Max. working width: 200 mm - Max. working height: 150 mm - Number of spindles: 4: Itodpsymnqcjfx Al Nef 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down and right/left - Spindle diameter: 40 mm - Spindle speed: 6000 rpm From the top: - 6 feed-in toothed rollers, including 2 double rollers - 1 feed-out rubber roller From below: - Feed-in toothed roller, driven and swivel-mounted in the lower table - 3 side pressure elements - Feed-out metal roller, smooth and driven - All rollers with pneumatic pressure - Infeed table length: 2130 mm - Table adjustable up/down - Centralised lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment via inverter - Feed motor: 3 kW - Feed on Cardan shafts - Enclosed in a cabin - Extraction connector diameter: 4 x 130 mm - Dimensions (L/W/H): 3550 x 1750 x 1800 mm - Weight: approx. 3000 kg ADVANTAGES – With 4 heads – Ideal for wet and dry wood – DTR technical documentation – Used machine, in very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Max. panel width: 4400 mm Max. panel length: 4300 mm Max. main saw blade projection: 110 mm Itedpfx Asmt Hhwel Nef Number of clamps: 8

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners Itjdpjxranpjfx Al Nof 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: rabljeno, Število vreten: 5 kosov Delovna širina: 230 mm Iodpfxsx Ecguj Al Notf Višina skobljanja: 120 mm Avtomatski štiristranski skobeljni in profilirni stroj Weinig Profimat 23 E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom. Vreteno 1: Spodaj / 5,5 kW / 40 mm Vreteno 2: Desno / 5,5 kW / 40 mm Vreteno 3: Levo / skupen motor z #2 / 40 mm Vreteno 4: Zgoraj / 7,5 kW / 40 mm Vreteno 5: Spodaj / 4 kW / 40 mm

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Profimat 26 Super Working width: 230 mm Working height: 130 mm Number of spindles: 5 Spindle arrangement: Bottom: 4 kW Left Right: 7.5 kW Top: 5.5 kW Bottom: 4 kW Pneumatic pressure rollers divided into 3 sections Itodeu Hgd Iepfx Al Nof Feed speed adjustable via variator: 5-24 m/min CE Certificate Technical documentation

Stanje: rabljeno, Leto izdelave: 2001, skupna širina: 5.440 mm, Dimenzije (D x Š): 170 x 544 cm Cena: Na vprašanje - Leto izdelave: 2001 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat: Ne - Serijska številka: 92789 - Napetost [V]: 380 - Poraba toka [A]: 85 - Varovalka [A]: 100 - Moč [kW]: 38,0 - Transportni paketi [kos]: 1 Finančne informacije DDV: Navajena cena je brez DDV DDV/diferencirana obdavčitev: DDV je odbiten za podjetnike Ijdswnizmopfx Al Netf Dostava in prevzem v račun sta možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Leto izdelave: 2003, stanje: rabljeno, Technical Data: - Manufacturer: Weinig - Model: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm - Spindle arrangement: Spindle 1 bottom: Planing and milling of the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 top: Combination tool, consisting of a special planer head with guide groove and 2 face milling cutters. Precision thickness planing and face milling of the gluing surfaces right and left. Face milling cutter right: 240x17x40 mm, Z=8 Special planer head: 125x240x40 mm, Z=4 Face milling cutter left: 240x80x122 mm, Z=8 Tool diameters: 125 and 250 mm Spindle 3 bottom: Removal of the guide groove and finishing planing. 125x170x40 mm, Z=4 - Spindle 1: 11 kW - Spindle 2: 18.5 kW - Spindle 3: 5.5 kW - Feed: 2.2 kW Iedpfxoyatffs Al Njtf - Feed rate: 5-20 m/min. - Spindle speed 1 and 3: 6,000 rpm - Spindle speed 2: 7,000 rpm - Transport rollers (hardened): Ø 140 mm - Infeed table length: 2,000 mm - Machine tables hardened - Guide groove in machine table - Extraction ports: 2x140 mm, 1x160 mm - Airflow volume: approx. 5,500 m³/h - Voltage/Frequency: 400/50 - Location: Blomberg warehouse from 01.2026

Stanje: rabljeno, Leto izdelave: 2001, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Length of jointer table: 2000 mm Feed speed: 5–24 m/min Four-side planer Weinig Profimat 26 S Summary: - 5 spindles (bottom, right, left, top, bottom) - Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge - Working width (with tool cutting circle 125 mm): 20–230 mm - Working height (with tool cutting circle 125 mm): 8–120 mm Detailed description: 1ST SPINDLE - First lower horizontal spindle - Motor with brake, 5.5 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 125–145 mm - Axial adjustment 5 mm - Rebating device - Hardened table insert in front of 1st lower spindle 2ND SPINDLE - First right vertical spindle - Motor with brake, 7.5 kW (shared with left vertical spindle) - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle, 15 mm below table level: 100–200 mm - Tool cutting circle, 40 mm below table level: 100–180 mm - Max. tool diameter behind fence: 180 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Right spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment: 125 mm 3RD SPINDLE - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle, 15 mm below table level: 100–200 mm - Tool cutting circle, 40 mm below table level: 100–180 mm - Max. tool diameter behind fence: 180 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Insertion segment: 125 mm 4TH SPINDLE - First upper horizontal spindle - Motor with brake, 7.5 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 112–200 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Upper horizontal spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw diameter 200 mm - Split pressure shoe in front of upper spindle, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded - Pneumatic glazing bead discharge after upper spindle, height-adjustable 5TH SPINDLE - Second lower horizontal spindle - Motor with brake, 4.0 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 112–200 mm - Max. profiling depth: 15 mm All profiling spindles are dynamically balanced for high concentric running accuracy Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge FEED SYSTEM - Mechanical feed, steplessly adjustable 5–24 m/min, with brake – 2.2 kW - Infeed roller before 1st lower tool pneumatically controlled "up/down" - Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning - Feed roller adjustment in relation to left spindle, axial 35 mm MACHINE ELECTRICS - Operating voltage: 400 Volt (range 380–420 Volt), 50 Hz Itodpfxeyuzczj Al Nef - Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1 Further information on request.

Stanje: rabljeno, Four-side planer, Weinig brand, model Unimat U17N with 7+1 spindles, spindle length 170 mm, equipped with fluted table and cardan shaft feed. Spindle configuration: Bottom, right, left, right, top, bottom, left, universal. Spindle motor power: 4+4+5.5+5.5+7.5+5.5+5.5+7.5 kW. Iodpfx Alspfp Els Nstf Feed motor power: 4 kW, raise and lower: 0.75 kW.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, Štiristranski skobeljni stroj SCM SUPERSET XL Leto izdelave: 2007 Itsdoyhhx Nepfx Al Njf Stroj je deloval le 50 ur, praktično kot nov. Tehnični podatki: • Delovna širina do 240 mm • Delovna višina do 120 mm • Hitrost vrtenja vreten: 6000 obr./min • Brezstopenjsko nastavljiv pomik 5-25 m/min • Razporeditev vreten (5 vreten): - spodnje 7,5 kW - desno 7,5 kW - levo 7,5 kW - zgornje 7,5 kW - spodnje 7,5 kW • Vsa vretena za orodja z neodvisnimi motorji Stroj ima 2 navpični vreteni (2 in 3) s hitromenjalnimi priključki HSK85S.