Center CNC za struženje in rezkanje

WFL M 60 G MILLTURN

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Gbjdju Hl R Tjpfx Afqeg Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Gsdpfsxddvnsx Afqebg Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: zelo dobro (rabljeno), Novo 2008 Premer nad posteljo – 600 mm (Ø 23,62") Premer × dolžina obdelovanca – Ø 300 × 600 mm (Ø 11,81 × 23,62") Maks. premer obdelovanca – Ø 380 mm (Ø 14,96") Maks. hod osi Z/X – 600 / 240 mm (23,62 / 9,44") Z-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min X-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min Premer vretena/premer vlečne cevi – STD: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04") OPT: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03") Hitrost vretena – STD: 8'' vpenjalna glava 3500 vrt/min OPT: 8'' vpenjalna glava 4500 vrt/min, 10'' vpenjalna glava 3500 vrt/min Premer vpenjalne glave – STD: Ø 8'' ; OPT: Ø 10'' Hidravlična konjiček – hod 465 mm (18,3") MT št. 4 VDI orodni postaji – OPT: 8; STD: 10 Hladilna tekočina Transportni trak za odrezke Priključna moč – 208–220 V / 100 A / 3 faze / 60 Hz Tloris (D × Š × V) – 4080 × 1675 × 1842 mm (160,62 × 65,94 × 72,51") Godpfx Aerfx Tnofqebg Bruto teža (približno) – 5200 kg (11.440 lbs)

Stanje: novo, Leto izdelave: 2023, The B-Series is suitable for bending your reinforcing steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (double bending): BS36, BS45, BS50, BS60 (MG65 PRO) Product information: - Voltage: 380 V (16 A) - Motor power: 2.2 kW – 6 kW - Ideal for your construction company or for use on your construction sites - Left-right bending possible (in the BS models) - In addition to single bending, a bending sequence can also be programmed - Inserts for different rebar diameters are included in the accessories (incl. accessories) Godpfxjm Shffe Afqjbg - Can be operated in automatic or manual mode - Bending capacities depending on steel strength according to table (see images) - Optionally available with digital control panel - Net weight: 215 kg – 850 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, feel free to contact us!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, CNC Milling Machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Gedpfx Aohlp Iwefqsbg Year of manufacture: 2001 Condition: Used Control unit: Heidenhain TNC 426 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping available throughout Germany and Austria. Surcharge: €1,000 Sale excludes any warranty.

Stanje: novo, Cutting diameter round: 900 mm Gbodpjfg E Hpofx Afqog Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 7.100 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 650 mm, premer struženja nad prečnim suportom: 350 mm, premer struženja: 385 mm, hitrost vretena (min.): 4.500 obr/min, izvrtina vretena: 67 mm, potovalna razdalja osi X: 255 mm, pomik po osi Z: 800 mm, For sale: Used DMG NEF400 V3 5th Generation ISM 2-axis universal lathe with C-axis. Travel distance: X: 255 mm Z: 800 mm Swing diameter over bed: 385 mm Maximum swing: 350 mm Turning length: 650 mm Equipment: - Main spindle with integrated spindle motor - Speed: Max. 4,500 rpm - Drive power: 8.0 / 11.5 kW (100/40% duty cycle) - 12-position disc turret VDI30, 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 taper, Travel: 680 mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speed for vibration-critical setups - Manual tool measurement system in work area Gsdoxzqnrspfx Afqsbg - Hydraulic power unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump, 12 bar, 23 l/min - Chip conveyor, discharge height 1,250 mm to the right - Bar machining package including: - Workpiece pick-up device with conveyor to the left for parts max. 65 mm diameter, 150 mm length, weight up to 3 kg - Hollow chucking device, draw tube inner diameter max. 67 mm - Interface for bar loader magazine - Foot switch for tailstock activation - Hydraulic 3-jaw chuck SMW-AUTOBLOK RMS sensor (Relocation Machine Security) Machine available immediately! Machine is ready for operation! We will load the machine for you! Transport can be arranged upon request!

Stanje: dober (rabljeno), Leto izdelave: 2014, 900 mm premer vrtenja, 650 mm maksimalni obdelovalni premer, 992 mm maksimalna dolžina struženja, vreteno do 1000 min⁻¹, premer izvrtine vretena 275 mm, revolver z 10 postajami, Gbsdpfx Aswwtrbsfqjg vretenski motor 45 kW, krmilje FANUC Series 32i, močanske vpenjalne glave s 3 čeljustmi, konjiček, transporter za odrezke, hladilna naprava,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, FPT heavy-duty mobile column boring machine, high-dynamics with 5-axis support, model SPIRIT 240-M140. Working area: X-AXIS: 14,000 mm Y-AXIS: 5,000 mm Z-AXIS: 2,500 mm Equipped with 2 rotary tables, each with a 50-ton load capacity. Automatic tool changer. CNC control: Siemens. Gbedpfxjwiifho Afqsg The machine is fitted with 3 heads: - 1 fully automatic bi-rotary precision milling head TUPCG - 1 automatic heavy-duty milling head TO144 - 1 D’Andrea facing and boring head for turning operations, working range from Ø150 mm to Ø1600 mm, model U-TRONIC 800.

Stanje: novo, Leto izdelave: 2025, Praktikant GSD One of the best-selling and most popular conventional precision lathes stands out due to: advanced engineering highest precision durability ergonomics proven in daily practice minimal space requirements and a wide range of accessories. Proven for decades in single-part and small-batch production, across trade and industry, for training and further education, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed shaft cover Main spindle brake Toolroom accuracy according to DIN 8605 Pole-changeable brake motor Gedpfx Afswhzcpeqebg Headstock gearbox 16 fixed spindle speed steps Digital position readout (optional) LED machine light TECHNICAL DATA: WORKING AREA Centre height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Centre distance 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter at front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 TEST ACCURACY DIN 8605 * Whitworth threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only possible using additional change gears. The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For details on equipment and configuration, please contact us.