Wenzel LH 65

Wenzel LH 65

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LH-M064774, merilno območje os X: 650 mm, merilno območje osi Y: 750 mm, merilno območje os Z: 500 mm, teža obdelovanca (maks.): 270 kg, Offered for sale due to upgrade (we require a larger model) Wenzel 3D Coordinate Measuring Machine, Type LH65, with accessories New measurement software system: Quartis R2022-2 Used, but in very good condition Fixed price: 22,500 EUR net, ex works 95369 Untersteinach, collection only Payment required prior to or at the time of collection The measuring machine will remain in use until early April 2026; demonstrations possible until then Technical data - Model: LH 65/CNC - Year of construction: 2005 - Initial commissioning: 04/2006 - Serial number: LH-M064774 - Weight: 1,270 kg - Permissible workpiece weight: 500 kg - Regularly serviced and calibrated - Machine has always been located in a climate-controlled measurement room - Operating time approx. 1 week per month Measuring range and accuracy - Measuring range (X/Y/Z): 650x750x500 mm - Usable table area: 1450x850 mm - Measurement uncertainty according to DIN EN ISO 10360-2 for TP200 probe - Measurement accuracy (MPE E): 2.6/1000+(L/300) - Temperature range: 20°C ±2K, 1.0K/h, 1.0K/m - Operating temperature: 15°C – 30°C - Relative humidity: 10% - 70% - Supply pressure: 6-10 bar, pre-filtered, quality in accordance with ISO 8573-1, class 4 or better Ljdpfx Alsyxv Eao Nshf Equipment - CNC control - Renishaw probing system - Base plate made of natural hard stone, minor repairs present (see photo) - Air bearing, horizontal, LH system on measuring table - Active damping (pneumatic), instead of elastomer vibration dampers - PC system & software - Upgraded to WM Quartis R2022-2 (new price: 23,740.50 EUR) - 4-port PCIe interface card - USB keyboard, black German layout - One LED monitor, Full HD (1080p) – 61 cm, 24” - Front panel PC Si-Esprimo P757 Accessories - Reference sphere, diameter 25 mm, ceramic, with M10 fixture - Small stylus kit, M2 - PH10T rotary and swivel head - PHC 10-3 Plus control unit for rotary/swivel head - 1x TP200 - 1x SF module - 1x SCR 200 - Various styluses M2 (1 piece each: 0.5mm, 1.0mm, 2.0mm, 4.0mm diameter) - M2 rotary/swivel joint - M2 stylus holder, length 19 mm - 1 hex key and 2 pin keys - Stylus holder case - PC and controller cart with desk combination - HAT-400 hand control unit - Documentation All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale. Sale without warranty.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 27.608 h, proizvajalec krmilnikov: SIEMENS, Ta 5-osni DMG MORI CTX beta 800 TC je bila izdelana leta 2014. Opremljena je z glavno vreteno s 5.000 obr/min in protivreteno s 6.000 obr/min ter z 30-pozicijskim magazinom za orodja. To stružno-rezkalno središče DMG MORI CTX beta 800 TC je idealno za zahtevnejše stružno-rezkalne postopke. Za več informacij o stroju nas kontaktirajte. Ljdpjx U D Hqefx Al Nehf • Orodja: 30 kosov • Vključena orodja, prikazana na fotografijah • Brez podajalca palic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Travel X/Y/Z: 600 mm / 750 mm / 500 mm, max. length measurement error: 3 + L/350, max. single point error: 3, control: Pantec Eagle Pro/3. Includes PH10M Plus probe head, PHC-2, TP200 sensor, 20-piece stylus kit, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. On-site inspection possible. Lsdpsw H Auwjfx Al Nohf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 054344, Oprema: Na voljo je tipska ploščica, Wenzel LH 65 Podatki o stroju: MBX 650-MBY 1000-MBZ 500 Serijska številka 054344 Leto izdelave 2005 Krmilnik: WPC 2030 Merilni sistem: Renishaw Izmenljivi most: Renishaw Lhodpfsxr Av Nox Al Nof Programska oprema Metrosoft CM 3.111 Programska oprema Quartis R10 Merilna glava: PH 10M PHC: PHC 10 Tipalo: 2x SM25-1 Tipalo: 1x SM25-2 Tipalo: 1x TM25 (adapter) DAkkS kalibracijski certifikat z dne 05.09.2025 Merilni stroj je popolnoma funkcionalen in v odličnem stanju

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Lhsdpfjuxft Eox Al Nsf Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, število osi: 9, To 9-osno stružno-rezkalno središče NAKAMURA-TOME WY150 je bilo izdelano leta 2023. Gre za stružno-rezkalno središče z obsežno opremo držal za orodja, vključno s 6 zunanjimi, 4 notranjimi, 3 radialno vrtljivimi ter 12 aksialno vrtljivimi držali ter vpenjalnim tulejem in trivaljno vpenjalno glavo. Izkoristite priložnost za nakup tega stružno-rezkalnega centra NAKAMURA-TOME WY150. Za več informacij nas kontaktirajte. Dodatna oprema: • 6 zunanjih držal za orodje • 4 notranja držala za orodje • 3 radialno vrtljiva (gnana) držala za orodje • 12 aksialno vrtljivih (gnenih) držal za orodje • 1 vpenjalni tulec Lhodpfxjyb Sako Al Nsf • 1 trivaljna vpenjalna glava

Stanje: rabljeno, Leto izdelave: 2018, x-Weg 620 mm y-Weg 520 mm z-Weg 460 mm c-Achse 360° b-Achse -50 / +110° Abstand Spindelnase und Tisch 170 - 630 mm Lhodoxap Eaepfx Al Nsf CNC-Steuerung iTNC 640 HEIDENHAIN Tischgröße Ø 650 mm max. Tischbelastung 500 kg Spindeldrehzahlen 12.000 U/min Antriebsleistung - Spindelmotor 15,5 / 33,0 kW Eilgang 48 m/min Werkzeugwechseleinrichtung 48 Pos. SK 40 Kühlmitteleinrichtung IKZ 30 bar Betriebsspannung 400 V Gesamtleistungsbedarf 35 kW Maschinengewicht ca. 10,0 t Raumbedarf ca. 4,00 x 2,46 x 2,85 m Späneförderer 2,90 x 0,50 x 1,30 m Kühlmittelkasten 2,30 x 1,70 x 0,45 m Kühlmittelpumpe 0,60 x 0,50 x 0,90 m Ölkühler 0,55 x 0,60 x 1,10 m 5-Achsen-Simultan-Bearbeitungszentrum - Fabrik-Nr.: 9496-117 - Steuerung EIN: 10.137 h - Spindel EIN: 3.380 h - Steuerung: HEIDENHAIN iTNC 640 - elektr. Handrad - IKZ 30 bar - Späneförderer

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Ledot Hw Nyepfx Al Nohf Payment: Net – upon receipt of invoice.

Stanje: novo, The splitter separator has a diameter of 900 mm and can be supplied with sound insulation upon request. Drive: Electric motor, 0.75 kW Lsdpfxovuku Ne Al Njhf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm Lhjdpfx Aloxw N S Ij Nsf - Spindle speed range: 20–3,150 rpm, stepless - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.