Koordinatni merilni stroj

Wenzel LH 65

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LH-M064774, merilno območje os X: 650 mm, merilno območje osi Y: 750 mm, merilno območje os Z: 500 mm, teža obdelovanca (maks.): 270 kg, Offered for sale due to upgrade (we require a larger model) Wenzel 3D Coordinate Measuring Machine, Type LH65, with accessories New measurement software system: Quartis R2022-2 Used, but in very good condition Fixed price: 22,500 EUR net, ex works 95369 Untersteinach, collection only Payment required prior to or at the time of collection The measuring machine will remain in use until early April 2026; demonstrations possible until then Technical data - Model: LH 65/CNC - Year of construction: 2005 - Initial commissioning: 04/2006 - Serial number: LH-M064774 - Weight: 1,270 kg - Permissible workpiece weight: 500 kg - Regularly serviced and calibrated - Machine has always been located in a climate-controlled measurement room - Operating time approx. 1 week per month Measuring range and accuracy - Measuring range (X/Y/Z): 650x750x500 mm - Usable table area: 1450x850 mm - Measurement uncertainty according to DIN EN ISO 10360-2 for TP200 probe - Measurement accuracy (MPE E): 2.6/1000+(L/300) - Temperature range: 20°C ±2K, 1.0K/h, 1.0K/m - Operating temperature: 15°C – 30°C - Relative humidity: 10% - 70% - Supply pressure: 6-10 bar, pre-filtered, quality in accordance with ISO 8573-1, class 4 or better Equipment - CNC control - Renishaw probing system - Base plate made of natural hard stone, minor repairs present (see photo) - Air bearing, horizontal, LH system on measuring table - Active damping (pneumatic), instead of elastomer vibration dampers - PC system & software - Upgraded to WM Quartis R2022-2 (new price: 23,740.50 EUR) - 4-port PCIe interface card Fpodpfoyxv Eajx Ahmsh - USB keyboard, black German layout - One LED monitor, Full HD (1080p) – 61 cm, 24” - Front panel PC Si-Esprimo P757 Accessories - Reference sphere, diameter 25 mm, ceramic, with M10 fixture - Small stylus kit, M2 - PH10T rotary and swivel head - PHC 10-3 Plus control unit for rotary/swivel head - 1x TP200 - 1x SF module - 1x SCR 200 - Various styluses M2 (1 piece each: 0.5mm, 1.0mm, 2.0mm, 4.0mm diameter) - M2 rotary/swivel joint - M2 stylus holder, length 19 mm - 1 hex key and 2 pin keys - Stylus holder case - PC and controller cart with desk combination - HAT-400 hand control unit - Documentation All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale. Sale without warranty.

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds Fpodpfx Ahst Hw Nyemsh • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, število osi: 3, This 3-axis Wenzel LH 65 was manufactured in 2020. It features CNC control with active damping, a PH6M/TP200 probe head, and a base plate measuring 600 x 500 x 25 mm. The scope of delivery includes an 18-piece set of M2 styli, quick-change racks, and a microfilter for solid particle filtration. If you are looking for high-quality measurement capabilities, you should consider the Wenzel LH 65 CMM machine we have for sale. Please contact us for further details. • 3D coordinate measuring machine • Generation: New Generation 2 • Accuracy Class: PREMIUM accuracy • Active damping system • CNC control: 3-axis Basic-CW • Included software: WM | QUARTIS GEO-L, WM | QUARTIS EMD, WM | QUARTIS IPH, WM | QUARTIS PRC • Probe head: PH6M / TP200 probe head Additional Equipment • 18-piece M2 stylus set with case • Reference sphere • 2x SCR200 quick-change racks • Base/clamping plate 600 x 500 x 25 mm Fpjdpfx Ahsylm Hgomsh • 5x TP200 SF modules • Microfilter for solid particle filtration

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Travel X/Y/Z: 600 mm / 750 mm / 500 mm, max. length measurement error: 3 + L/350, max. single point error: 3, control: Pantec Eagle Pro/3. Includes PH10M Plus probe head, PHC-2, TP200 sensor, 20-piece stylus kit, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. On-site inspection possible. Fsdpfx Ahew H Auwomoph

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 1.000 mm, Measuring ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld terminal: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe change system: Renishaw Fpjdpedv I Absfx Ahmjh (Price REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Original year of construction: 2014, modernized in 2017 and 2025 Exchange for another CMM possible

Leto izdelave: 2023, stanje: novo, Tank & Environmental Protection Wozniack – Specialist Company according to the Water Resources Act Dear Sir or Madam, Fpodjk Dpv Aspfx Ahmeh We offer a 10,000-liter double-walled storage tank for heating oil storage, compliant with EN 12285-2 standard. Nominal capacity: 10 cbm, new, EN 12285-2 standard Color finish: RAL 7035 paint Material: steel-in-steel, material grade S235JRG2 Documentation: manufacturer's certificate / type plate Includes: - 1 dipstick - 1 vent connection - 1 fill connection - 1 new overfill prevention - 1 new leak detection device - 1 ladder - 1 suction line Tank dimensions: approx. 5,300 mm (length) Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Installation: above-ground storage Delivery time: September With best regards from Warstein, Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Stanje: novo, The splitter separator has a diameter of 900 mm and can be supplied with sound insulation upon request. Fjdsvuku Njpfx Ahmoph Drive: Electric motor, 0.75 kW

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting Fpjdjt Hw S Iopfx Ahmjh • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, Used Machine – Mitutoyo Crysta Apex C7106 Here I am offering a very well-maintained 3D coordinate measuring machine (CMM) from Mitutoyo. The machine was manufactured in 2004 and was exclusively operated in a climate-controlled measuring room. This is a top-of-the-line, fully equipped machine, so you can start working with it immediately! Fjdpfsvpdhxjx Ahmeph We can, of course, organize transport, installation, commissioning, and calibration (factory or DAkkS certification) for you, so you do not have to worry about any of the logistics. Machine configuration can be tailored to your requirements upon request. Typically, these machines are equipped with a rotary and swivel head, including the corresponding probe and modules. A probe rack can also be offered if not already included. We can also provide a software upgrade if required. For specifications, please refer to the PDF or images. Leasing available on request. (All prices are net plus VAT.)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, Rešitev za paletiranje s kolaborativnim robotom (kobotom) - razbremeni zaposlene težkega dvigovanja in monotonega, fizičnega napora - sistem je mogoče s konfiguracijo prilagoditi individualnim potrebam - zahteva manj prostora kot običajne rešitve za paletiranje (dimenzije 2.650 x 1.600 mm) Fpedpforbz Rxex Ahmsh - ni potrebna stacionarna varnostna tehnika, zato je UNIPAL enostavno in prilagodljivo uporaben - nadzorna plošča za pregled nad procesom - nosilnost do 22 kg in višina paletiranja do 2.200 mm - hitro in enostavno preurejanje - Plug-and-Play (potrebuje 230 V napajanje) in 6 barov stisnjenega zraka