Skladiščni dvigalo

Weland Solutions Compact Lift 2440

Leto izdelave: 2008, Stanje: rabljeno, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Slide adjustment: 120 mm Slide area: 2000x1100 mm Bolster area: 2000x1200 mm Die opening in table: 1700x250 mm Shut height (bottom), slide adjustment top: 500 mm Side frame window: 820x650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in slide Semi-automatic stroke adjustment Motorized slide adjustment Stroke rate frequency-controlled Central grease lubrication for guides Oil circulation lubrication Slide counterbalance cylinders Safety doors front/rear Hydraulic die clamping system Extendable bolster plate Hydraulic rollblock strips in table Feed unit: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Loop control, height adjustment via geared motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm, Max. strip cross-section: 1600 mm² at 450 N/mm² Straightening speed, frequency-controlled up to 25 m/min Strip introduction aid: transfer table with hydraulic separating wedge, hydraulically adjustable Hold-down hydraulically adjustable Strip edge guidance: 1 pair of lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers Ø140 mm, pneumatically adjustable Straightener: 9x rollers Ø70 mm, adjustment manual via handwheel Decoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Djdpfx Aaordi Dle Hewf Drive, frequency-controlled Limiting arms Hydraulic expansion Hydraulic hold-down arm

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Djdpfx Aashigmbe Howf Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: novo, High-performance thread tapping machine with leadscrew mechanism. Safety system to prevent tool breakage. Programs for single and continuous operation, programmable thread depth, piece counter, LED light, and electronically controlled motor braking for single-cycle mode. Easy leadscrew change via quick coupling. Normal drilling capacity: 15 mm Thread tapping capacity: M 3 – M 10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat depth: 250 mm Spindle/table distance: 185 to 541 mm Table surface: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Power supply: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm, 560 rpm, 1,000 rpm, 1,600 rpm Dwjdofrlndepfx Aa Hef Also available as a column drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column extended by 200 mm: 14154

Leto izdelave: 2017, obratovalne ure: 30 h, Stanje: kot nova (razstavni stroj), Maximum strip thickness: 4 mm Strip width: 300 mm Repeat accuracy: +/- 0.05 mm NC drive with compact controller Feed force: 3000 N (300 kg) Djdpjb Nbglefx Aa Howf Maximum strip pressing force: 1.2 t

Leto izdelave: 1979, Stanje: rabljeno, Pressure: 160 t Upright distance: 850 mm Stroke: 400 mm Ram area: 800x700 mm Ejector stroke: 300 mm Ejector force: 20 t Table area: 800x700 mm Total power requirement: kW Machine weight approx. 12 t Space requirements approx. 1800x1800x4200 mm Sick BWS for protection and automatic/semi-automatic modes Blow-off function Ejector Mechanical fixed stop Stroke/pressure cut-off Pressure holding time Approved for manual loading operations Djdpfx Aelp Uz Rsa Hjwf

Stanje: rabljeno, Material width: 250 mm Material thickness: 2 - 4 mm Number of straightening rollers: 7 Entry height: 1250 mm Strip feed angle, positive: 25° Dwedpfx Aaegbl Aaj Hof Strip feed angle, negative: 30° Total power requirement: 3 kW Machine weight: approx. 800 kg Space requirement: approx. [to be specified] m² The straightening machine has been disassembled, inspected, and subsequently repainted.

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 90.293/1, Material width: 75 mm Total power requirement: 1.5 kW Dwedpfx Aocxxpnea Hsf Space requirement approx.: 1.90 x 1.15 x 1.25 m

Stanje: zelo dobro (rabljeno), Here we offer you a TOX Complete Punch Riveting System. TOX Complete Punch Riveting System Type TZ-VSN The punch rivet first pierces all joining partners and pushes the punched slug out of the joining area. With its innovative technology for complete punch riveting, TOX PRESSOTECHNIK, the specialist for sheet metal joints, enhances its product and service portfolio with a future-proof process. Complete punch riveting provides an additional mechanical sheet metal joint, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed universally, so that punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be flexibly processed both with TOX hand pliers and TOX robotic tongs. Type: TZ-VSN Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Dodpfxodz Afwj Aa Howf Connections Power: 3.4 kW Electrical connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Power supply type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and error!) If you have further questions, we are happy to answer them by phone. Orders can also be placed in writing via email or fax.

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Stroke: 200 mm Table area: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram area: 1700 x 800 mm Dodotqm Dgjpfx Aa Hjwf Ram adjustment: 100 mm Total power requirement: 11 kW Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m - Safe for manual loading operations - Conversion to West system - Light curtain

Stanje: dober (rabljeno), Leto izdelave: 1994, Sonderangebot, nur 4.000 EUR netto Dsdpfskth U Rsx Aa Hjwf