Prehodna prostornina 5 m³

Weiss Technik Klima-Prüfkammer WK 5/55-120 -55°C bis +120°C

Stanje: rabljeno, GOM - ATOS III Rev.02.1 - 3D-merilna naprava Stanje: rabljeno, zelo dobro. Tehnični podatki: Kamerni sistem: 2 x 8.000.000 Kamerne pike: 2048 x 2048 slikovnih pik (pribl. 4 megapiksle) Velikosti merilnega polja XYZ: 150 x 150 x 100 mm do 2000 x 2000 x 2000 mm Razdalja merilne točke: 0,075 mm do 1,0 mm Čas skeniranja: približno 2 sekundi Merilni volumen: 700 (vklj. s kalibracijsko ploščo) Tehnologija Blue-Light: Natančne meritve neodvisno od okoljskih svetlobnih pogojev. Kdodpexr Umgofx Al Njk Vključuje računalniško opremo in USB ključek Programska verzija 2023 Vklj. Tritop sistem (kamera, 2x 1 m merilni letev, licenca) Vse v originalnih kovčkih Z stojalom, računalnikom, rackom, zaslonom, malim orodjem, referenčnimi točkami, 1x tipalo Priključite in takoj začnite delati…

Stanje: zelo dobro (rabljeno), Weiss Model: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to +150°C Chamber volume: 34 liters Feedthroughs included in standard configuration: R1 NW 50 mm Kdodpfx Alstr Dins Nok L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance Data for Temperature Testing: Temperature range: -60 to +150 °C Temperature variation in stabilized state (per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Performance Data for Climate Testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (in stabilized state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.h. Operating Data: Test chamber lighting: Halogen bulb 12V, 20W Nominal voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Nominal power: 2.5 kW Nominal current: 11 A Required customer-side fuse: 16A slow-blow Heat dissipation for air-cooled chambers: Max. heat emission to environment: 1700 W Refrigerants: R-452A / R23 Weight: 140 kg For your safety as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors, all details are non-binding!) If you have any further questions, we are happy to answer your calls.

Stanje: zelo dobro (rabljeno), Feutron Model: 3702/06 Climate Test Chamber, Water-Cooled Technical Data: Test Chamber Nominal Volume: 2.0 m³ Dimensions: Outer test chamber with humidifier console Width: 2970 mm / Height: 2370 mm / Depth: 1530 mm Rear wall Minimum installation dimensions: Width 2970 mm / Height 2390 mm / Depth 1550 mm Test Chamber (Inner): Width 2000 mm / Height 1000 mm / Depth 1000 mm Door: double-leaf, clear opening width 2000 mm / height 1000 mm Viewing windows, heated, 2 pcs: Width 500 mm / Height 600 mm Cable port, 1 pc. left side wall ∅ 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature variation over time ≤ ±0.5...±1.0 ΔN/K Rate of temperature change, measured in air supply without load: Cooling up to 2.0 average K/min Heating up to 2.0 average K/min Humidity range: 10...95 % rH Humidity fluctuation over time ≤ ±3.0 % rH Dew point range, temporarily: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer unit Refrigerant: R507 (Μ-K1) Climate and desiccant cooler, air-cooled / hermetic unit Refrigerant: R134a (Μ.KK) Power supply: Electrical connection: 400V 3/N/PE AC, 50Hz Power plug: CEE 5-pin, 32 A, with 5.0 m cable Kjdpfsk E Hnqsx Al Nsdk Maximum simultaneous power demand: 10.0 kW Power line fuse: 3x 25, Char. C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications may be subject to changes and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Performance Data for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.3 to ±1.0 K Spatial Temperature Uniformity: ±0.5 to ±2.0 K Rate of Temperature Increase (Heating): 4.0 K/min Ksdpfov Tnd Ssx Al Njdk Rate of Temperature Decrease (Cooling): 3.0 K/min Heat Compensation: max. 550 W Temperature Calibration Points: +23°C and +80°C Performance Data for Climate Testing: Temperature Range: +10 to +95°C Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Temporal Temperature Deviation: ±0.3 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.5 K Climate Calibration Points: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Dimensions (W x D x H): 350 x 300 x 310 mm External Dimensions (W x D x H): 640 x 750 x 1730 mm Electrical Connection: 1/N/PE AC 230 V ±10%, 50 Hz Nominal Current: 11.0 A Maximum Power Rating: 2.5 kW Sound Pressure Level: 59 dB(A) Refrigerant: R-404A / R23 Weight: approx. 130 kg For your security as a buyer, please note the following: The following procedures are performed on all chambers we offer in advance: 1. Functional test and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are run through a documented test cycle. Condition: used Scope of delivery: (see image) (We reserve the right to make changes or correct errors in the technical data and specifications!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for handling large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Kedpfx Aljytrzfj Nodk Typical applications: • Industrial production • Plastics and metal processing • Component drying • Heat treatment • Testing technology / material testing • Laboratory and experimental applications The system is robustly built to industrial standards and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Max. temperature: 250 °C Temperature safety class: TB Class 1 TWB Class 2 Chamber: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm Height: 2500 mm Depth: 2250 mm External dimensions: Width: 2900 mm Height: 3530 mm Depth: 2700 mm Load capacity: Internal housing load capacity: 400 kg Floor surface load: 1000 kg Weight Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Rated power: 54 kW Connection load: 58 kW Additional data: Minimum exhaust air volume flow: 600 m³/h Reduced exhaust air volume flow: 150 m³/h Purge time: 465 s Total vapor space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter cut-off temperature: 280 °C Temperature setpoint limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Kedpfxoklv H Ie Al Nsdk Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Sonstige, model krmilnika: Formtracepak V6.1, Opis: Tehnični podatki: Pomik v X/Z: 100/500 mm Vpenjalna površina: 600 x 450 mm Kdodpfx Alsy Dy A Tj Nsk Križna miza (X/Y): 100/50 mm Oprema/Dodatki: Formtracer: FTA-H4 D3000-D Contracer: C-3200 Surftest: S-3000 Upravljanje: Ročni upravljalnik z joystickom Ostala oprema: Vrtljivi primež, Kalibracijski etaloni, Zaščitna ponjava

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Zwick/Roell naprava za preizkušanje materialov – vrhunsko stanje, takoj pripravljena za uporabo Naprodaj je visokokakovostna naprava za preizkušanje materialov Zwick/Roell za natančno testiranje nateznih in tlačnih napetosti. Naprava blesti po zanesljivosti ter je idealna za laboratorij, kontrolo kakovosti ali izobraževanje. Podrobnosti in oprema: * Področje uporabe: preizkušanje natezne in tlačne trdnosti različnih materialov * Dodatki: * Razni rezervni deli Kdodpfjytrqyox Al Nok * Nosilci za vzorce * Libela * Originalni CD-ji s programsko opremo in priročnikom

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Kdsdpfx Aex Anipol Njk Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Kdsdpfxsxr A R To Al Nsk Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.