Multi blade saw

WEINIG Transportkette 59 Glieder

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Stroj za lupljenje debel BG 90 6W-GR Cedpfx Ajy Iabdog Eohd Letnik izdelave: 2001 Leta 2022 generalno prenovljen, nato ni bil več postavljen Minimalni premer: 14 cm Maksimalni premer: 90 cm S transportnimi napravami za dovod in odvod Takoj na voljo – generalno prenovljen Lokacija: Avstrija, v bližini Linza

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, obratovalne ure: 12.500 h, Funkcionalnost: nefunkcionalno, Hammel VB 850 E stacionaren z magnetom Csdpfxjyt Iawo Ag Eohd + 2 para novih gredi Stroj je brez menjalnika.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Csdpfx Agoy Ehrxj Ejhd Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Chodeukhd Aepfx Ag Ejd Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Cjdeh Invrepfx Ag Eshd Lapping plate diameter 525 mm Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operator panel Full-featured lapping machine, conventional control

Stanje: zelo dobro (rabljeno), TECNI-ARMENTIA CH-70 Edger – hydraulic control – programmable cutting width – storage for up to 12 programs – centering feed table TECHNICAL SPECIFICATIONS: maximum cutting width: 700 mm maximum cutting height: 130 mm main motor power: 55 kW Chsdpfxoidmpte Ag Ejd maximum material width: 830 mm length of fixed sleeve: 300 mm length of movable sleeve: 100 mm minimum material length: 700 mm spindle diameter: 65 mm sleeve diameter: 85 mm disk diameter: 350 – 400 mm feed speed hydraulically adjustable, stepless maximum feed speed: up to 38 m/min infeed table length: 2700 mm roller width: 700 mm roller diameter: 140 mm centering infeed table 2 lasers pump motor power: 4 kW anti-kickback pawl row three upper feed rollers three lower feed rollers hydraulic hold-down hydraulic height adjustment dimensions (L/W/H): 480 / 200 / 230 cm weight: 4000 kg

Leto izdelave: 1985, stanje: delavnici obnovljeno (rabljeno), REFORM Type AR 10 Model 40H Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Modicon control unit 6-step magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Infinitely adjustable grinding motor infeed: 0.01 mm – 0.1 mm Hydraulic oscillating drive Codsd E Np Eepfx Ag Eohd New power supply cables between machine and control cabinet

Leto izdelave: 2020, stanje: novo, Dimensions: 250x250x80 mm Filter systems are used for thorough separation of the finest iron metal contaminants. Examination of bulk materials Universally applicable in pipeline systems, hoppers, and chutes Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular, or square designs. Cjdpfedzqw Iox Ag Eohd Iron-containing particles are reliably filtered out of the bulk material as they pass through the grids. In addition, this design offers easy cleaning of the bars. The filter system can be removed from the housing with a single handle. The maximum operating temperature is 80°C.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Optimizing Cross-Cut Saw Dimter / Weinig OptiCut 450 Quantum Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine Description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for fast and precise cross-cutting of wood with yield optimization. The Quantum version is among the most advanced in the OptiCut 450 series, developed for industrial use with very high productivity, precise positioning, and reliable material feed. This machine is suitable for cut-to-length work, defect removal, and production optimization. The OptiCut 450 series is designed for integration with scanners, grading systems, and automated handling equipment. Typical features of the Quantum version include VarioSpeed feed, HighGrip rollers, an independent length measuring system, and servo-controlled waste gate. ([jacks.co.nz][1]) Technical Data: - Capacity: up to approx. 540 cuts/min - Feed speed: approx. 300 – 415 m/min - Maximum workpiece length: approx. 6.3 m - Saw blade diameter: 450 mm - Maximum cutting width: 235 mm - Maximum cutting height: 100 mm - Working height: 900 mm - Motor: 7.5 kW - Air consumption: approx. 1200 NL/min - Cutting accuracy in the OptiCut 450 series: approx. ± 0.8 mm Features / Advantages: - Very high cutting capacity - High positioning accuracy - VarioSpeed system that minimizes gaps between workpieces - HighGrip rollers for secure material feed - Servo-driven waste gate - Can be integrated with scanners and grading lines - Proven Weinig / Dimter technology for continuous production Cjdpfx Agsyu Uris Ejhd Condition: very good Note: Technical data may vary depending on the machine’s exact configuration, control version, conveyor system, and optional equipment.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 550 mm, izvrtina vretena: 77 mm, premer struženja nad ležiščem sani: 800 mm, GURUTZPE lathe model Super AT 400/6000, with 6,000 mm distance between centers, swing over bed 820 mm, swing over cross slide 550 mm, swing in gap 1,150 mm, spindle bore diameter 76.5 mm, 24 speeds ranging from 9 to 500 rpm, equipped with a fixed steady rest, fitted with an 800 mm diameter 4-jaw chuck, in very good overall condition. Codpfjwd D Itjx Ag Eohd