Optimizator

Weinig OptiCut S90

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels Crodpfx Aeylmmmeplsb • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: novo, Leto izdelave: 2025,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Weinig Dimter OptiCut S 90 Optimizing Saw with 2 Ejectors – After technical inspection Codpfsi Apgmsx Apljrb – Manufactured in Germany – Year of manufacture: 2005 TECHNICAL PARAMETERS: - Maximum cutting length: 4500 mm - Maximum width: 360 mm - Maximum height: 160 mm - Automatic length measurement - Optimization in 4 quality classes - Total power: 13 kW - Saw blade motor power: 7.5 kW - Pneumatic side and top pressure - Saw blade diameter: max. 500 mm - OptiCom Assist control - Outfeed belt conveyor: 5600 mm - Two ejectors - Total length: 13 m - Element marking printer - Cutting accuracy: +/- 0.5 mm - Transport dimensions (L/W/H): 600 / 240 / 190 cm - Weight: approx. 1800 kg

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers Crsdsv Si Szspfx Aplsb 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: GP6000H2, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, stiskalna sila: 12 t, skupna dolžina: 6.000 mm, skupna masa: 2.600 kg, delovna širina: 180 mm, delovna dolžina: 6.000 mm, Oprema: dokumentacija / priročnik, šasija, MASIVNA STISKALNICA ZA LEPLJENJE LESA, Glulam Tehnični podatki: Dolžina lepljenja: 6 m, (Opcije 12m,18m,24m) Več stiskalnic se lahko po potrebi zloži skupaj do želene dolžine (segmenti po 6 m) Dolžina pritisne letve: 980 mm Širina lepljenja: od 80 mm do 180 mm Skupna višina lepljenja: od 800 do 1300 mm Hod cilindra: 150 do 300 mm Sila stiska: max 12t na cilinder, oz. po naročilu, ustrezna sila se nastavlja na regulatorju tlaka 3D model stroja je na voljo, da lahko naačrtujete postavitev v proizvodnjo. Hidravlični agregat je opremljen s hidravličnim akumulatorjem in tlačnim stikalom, ki omogočata, da se med časomstiskanja hidravlična črpalka vklaplja samo občasno. Hidravlični akumulator zagotavlja konstanten tlak, tudi, ko črpalka ni v delovanju. Po padcu tlaka se črpalka ponovno vklopi in napolni akumulator. Cikel vklopov črpalke: cca 10 sekund. Vse površine, ki prihajajo v stik z lepilom, so zaščitene z polirano nerjavno pločevino, ki omogoča enostavno čiščenje lepila z vodo. Na stiskalnici sta dva vozička s pnevmatskima cilindroma za bočno poravnavo lepljenca. Masa stroja: 2600 kg Priklopna moč stroja: 5 kW, 3 x 400 VAC, Opcije: -prilagojena dolžina do 6 metrov -število vozičkov za bočno poravnavo je po naročilu -Voziček z valjem za nanos lepila po naročilu -Več stiskalnic se lahko po potrebi zloži skupaj do želene dolžine (segmenti po 6 m), zadnji segment po naročilu med 2,0 do 6,0 metrov. -Drugačna višina lepljenja Stroj je popolnoma testiran pri proizvajalcu. Cena ne vključuje prevoza in montaže. MASSIVE GLUING PRESS FOR GLUING WOOD, GLULAM Technical Specifications: Gluing Length: 6 m (Options: 12m,18m,24m) Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Cedpfx Apsu Axfceljrb Clamping Force: max 12 tons per cylinder or as per inquiry; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Stanje: rabljeno, prevoženi kilometri: 371.140 km, moč: 309 kW (420,12 KM), prva registracija: 12/2012, vrsta goriva: dizel, lastna masa: 10.170 kg, največja dovoljena obremenitev: 15.830 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80 R22,5, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: noben, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.600 mm, Leto izdelave: 2012, gradbena višina: 4.000 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, Cylinder head gasket defective The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine delivering 309 kW (420 hp). The vehicle, first registered on 03/12/2012, has a mileage of 371,140 km. It complies with the Euro 5 emissions standard and features an automatic transmission. With dimensions of 9,600 mm in length, 2,550 mm in width, and 4,000 mm in height, this truck offers a permissible gross weight of 26,000 kg. The yellow (metallic) vehicle is fitted with a green environmental sticker (Class 4) and includes practical features such as a steering axle, a reversing camera, and an integrated air conditioning system. The cab accommodates two persons and has two doors. The truck has had one previous owner and is in used condition. In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility for inspection and delivery within Germany. Cedpfx Aswzzkyjplerb Sale exclusively to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Crjdpev Nhx Usfx Apleb Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm Crodpfewwtw Dox Aplsb 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Double-sided parquet tenoner FOD. DOUBLE-SIDED machine for parquet production, equipped with a trimming saw for face leveling and a vertical cutter for groove production. Crsdpfxeilc Nce Apljb

Stanje: novo, Cefla sistem za lakiranje Crjdpewhbrwefx Apljb