Skobelni stroj z napravami za zlaganje

Weinig Hydromat 22 B / 8 Wellen

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete Weinig planing line consisting of: - Package infeed, automatic tilt destacking, baton separator. - Cross conveyor with reject separation. - Conveyor feed to twin band saw, singulation before planing machine infeed. - Throughfeed cross-cut saw, infeed to the planing machine. - Weinig 22 B planing machine with 8 spindles; electronic frequency-controlled feed up to 80 m/min. - In 2023, the planing machine was equipped with a new frequency-controlled feed unit, new table, and new wear plates. - Outfeed from the planing machine; Weinig stacking unit with lath magazine, as well as Almab stacking system. The entire planing line is fully mechanized. Specifications: - Wood length: 2.0 – 6.10 m - Wood thickness: 10 – 120 mm - Wood width: 40 – 220 mm Kdjdpfxowvqvbj Aamow - Package size input: 1.20 x 1.30 m; output: 1.20 x 1.20 m (W x H) Well-maintained system with regular servicing.

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 1025, doseg roke: 13.300 mm, nosilnost: 2.300 kg, širina gosenic: 3.000 mm, Oprema: kabina, žerjav, Leto izdelave: 1989 (tovarniška obnova 2007) Številka stroja: 1025 Širina tira, m: 3,0 Tip žerjava: OBX IV (leto izdelave 2007) Doseg: 13,3 m Nosilnost brez grabe: 2.300 kg / 13,0 m Kdjdpfx Aaov Ddtkjmew Grabež: vključen Postavitev žerjava: za kabino Stran kabine: leva Žaga: 1,3 m Alpha Merilni sistem: Enodelna pomoč z dvojnim merjenjem, leto izdelave 2007 !! Prodaja v imenu stranke !! Na voljo od aprila 2025

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram Kdjdpfx Aotynpxsamow + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: delavnici obnovljeno (rabljeno), Stroj za razpiranje tračnih žag za obojestransko razpiranje in povratno razpiranje v enem prehodu za žagine liste do cca 3 mm debeline, z vpenjalno napravo, z 2 novima merilnima urama, s hitro nastavitvijo višine, z vpenjalno letevjo in vpenjalnim vozičkom za žagine liste tračnih žag. Kdjdpfxsru Dabo Aamow

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, For sale: Randek production line. The machines are used and were manufactured in 2007. Kodpfx Aaswczlyjmsdw

Stanje: novo, Leto izdelave: 2024, MULTILAME ANGOMAC SOLID PASSAGE WIDTH: 600 MM MAXIMUM CUTTING HEIGHT: UP TO 120 MM Kodpfx Aaeh Ia Upomsdw MAXIMUM CUTTING WIDTH: 480 MM

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 5.000 kg, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.770 mm, lastna masa: 7.710 kg, skupna dolžina: 4.610 mm, vrsta pogona: Diesel, gradbena širina: 2.010 mm, Tip droga: Triplex Tehnično stanje: Novo STANDARDNA OPREMA • Odprta FOPS kabina operaterja • Nagibna kabina z asistenco za nagibanje • Varnostni pas s senzorjem • Sedež s senzorjem prisotnosti • Deložne luči • Zvočni opozorilnik za vzvratno vožnjo • Gumb za izklop v sili • Hill Holder – pomoč pri speljevanju v klanec • Vzvratno ogledalo • Nastavljiv, ergonomski sedež • Volan nastavljiv po naklonu in globini • Joystick za upravljanje vseh glavnih funkcij • Naslon za roko • FullGrip® druge generacije (4x4) • Diferencial z zaporo na sprednji osi • Inch-pedal • ECO način • Digitalni zaslon • Diesel filter z ločevalnikom vode • Negativna zavora Kjdpfx Aaotr Ufdjmjdw VILICE • Vilice 1.200 mm • Nosilec vilic 1.660 mm tip FEM IV • Integrirani stranski pomik

Stanje: dober (rabljeno), največja višina reza: 200 mm, širina verige: 400 mm, vhodna napetost: 380 V, vrsta nastavitve višine: električni, največja hitrost vrtenja: 3.400 obr/min, moč: 37 kW (50,31 KM), Največja delovna višina: 200 mm Kdedpstvpfmjfx Aamjw Širina verige: 400 mm Največja razdalja med zunanjimi rezili: 380 mm Premer rezil (min/maks): 250 / 350 mm Nastavljiva hitrost podajanja (inverter): 5 – 30 m/min Minimalna dolžina obdelovanca: 1000 mm Premer nosilca rezila: 70 mm Hitrost vrtenja nosilca rezila: 3.400 obr/min Moč motorjev: 2 x 37 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Kdjdjlu D Tfepfx Aamjw Hydraulic power unit: 3 kW / 140 bar

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Kdodpjhw Ng Isfx Aamew Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit