Chopper

Weima WL 4

Stanje: rabljeno, Infeed opening: 800x600 mm Motor power: 18.5 kW Hopper capacity: 0.6 m³ Rotor diameter: 252 mm Operating hours: 1741 h Dimensions (L x W x H): 1650x1200x1595 mm Loading dimensions (L x W x H): 1650x1200x1800 mm Weight: 1300 kg WEIMA Shredder WL 4, machine fully overhauled ----- Note: The machine has been completely overhauled by us, runs perfectly, see video. Knives and pusher plate have already been replaced by the previous owner. Drive belts were replaced by us during overhaul. 1741 operating hours. Description: Weima high-performance shredders, with their flexible application options, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts etc.) into fuel chips. They achieve enormous volume reduction, particularly for bulky materials. Operation: The machine is equipped with a large feed hopper and can be filled by conveyor belt or manually. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feed without the need for manual assistance. The hydraulically operated pusher automatically and load-dependently feeds the wood waste to be shredded into the cutting area of the rotor. The inner pusher guides are made of highly wear-resistant plastic (polyamide) and can be readjusted. The hydraulic cylinders are mounted on universal joints to prevent lateral forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80-120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are housed in milled pockets on special knife holders. This patented system, thanks to the reduced cutting gap between counter-knife and rotor, guarantees high throughput, low energy consumption, and optimal discharge of the shredded material. The screen placed under the rotor determines the chip size (10-100 mm). On request, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a robust gearbox which is mounted on a stub shaft at one end of the rotor. Technical data WL 4 / 18.5 kW ----- Infeed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Screen diameter: 15 mm Coating: Weima standard RAL 2002 / 7016 Connection rating: 400 V +/- 5 % / 50 Hz Weight: approx. 1,300 kg Including: Ffjdoyrtzwjpfx Abvew - Electric control system (Moeller / Siemens / Allen-Bradley) - Control cabinet (Rittal / Sarell) - Concave-ground reversible knives (40 x 40 mm) - Star-delta starting - Vibration-damping base - Patented V-rotor with milled knife pockets (Technical details as provided by manufacturer - subject to change and without guarantee!)

Stanje: rabljeno, obratovalne ure: 1.250 h, skupna masa: 1.500 kg, premer rotorja: 252 mm, skupna dolžina: 1.800 mm, skupna višina: 2.000 mm, skupna širina: 1.200 mm, širina rotorja: 600 mm, moč: 18,5 kW (25,15 KM), največja hitrost vrtenja: 90 obr/min, širina odprtine za polnjenje: 600 mm, dolžina polnilne odprtine: 800 mm, No. 3255 Fsdpfxsx Hhk Ro Abvefw Single-shaft shredder / Shredder WEIMA WL 4 Used, approx. 1,250 operating hours Quiet-running and slow-speed machine V-rotor system Main drive motor power: 18.5 kW Rotor diameter: 252 mm Rotor width: approx. 600 mm Rotor speed: approx. 90 rpm Hopper volume: 0.6 m³ Feed opening cross-section: 800 x 600 mm (L x W) Reversible blades, concave ground Automatic / Manual operation Screen perforation: 15 mm Extraction nozzle: 160 mm Transport dimensions: approx. 1800 x 1200 x 2000 mm (L x W x H) Weight: approx. 1,500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport or assembly Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner – no guarantee Subject to prior sale For used machines, any warranty is excluded; it is sold as seen Images and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: zelo dobro (rabljeno), obratovalne ure: 820 h, Zariadenie na spracovanie zvyškového dreva WEIMA Model: WL 4 Vstupný otvor: 600 mm x 800 mm Objem násypky: 0,6 m³ Výkon: v závislosti od materiálu a sita Priemer rotora: 252 mm Otáčky rotora: 60 - 100 ot./min Výkon motora: 18,5 kW Nástroje: 14 nožov Veľkosť otvorov sita: 20/25 mm Priemer odsávacej prípojky: 160 mm Rýchlosť prúdu vzduchu: 28 m/sec Ffjdpfx Abeylaf Aovjw Hmotnosť: cca 1 200 kg Rozmery (d x š x v): 1600 x 1150 x 1655 mm Vrátane všetkej dokumentácie Upozornenie k použitým strojom: • Technické údaje bez záruky, platí vyhradenie práva na predchádzajúci predaj. • Uvedené ceny platia EXW – naloženie v cene! • Stroje boli vyčistené a odskúšané na funkčnosť. • Všetky stroje sa predávajú v stave 'ako boli videné', bez akýchkoľvek nárokov na záruku. Kupujúci si môže stroje osobne prezrieť na mieste. • Osobitné dohody sú platné len v písomnej forme. (Na otázky odpovedáme iba s uvedením vašej adresy a telefónneho čísla!)

Stanje: rabljeno, Leto izdelave: 1993, Moč: 18,5 kW Število nožev: 28 Teža: 1300 kg Fedpfxeyk H Tqj Abvefw WEIMA drobilnik WL 4 - Leto izdelave: 1993 - Serijska št.: 500/1695 - Odlično stanje, malo rabljen Tehnični podatki: - Odpiranje lijaka z Logspacerjem: 600 x 1000 mm - Prostornina lijaka: 0,6 m³ - Delovna širina rotorja: 600 mm - Premer rotorja: 252 mm - Pogonska moč: 18,5 kW - Hitrost vrtenja rotorja: 80 - 120 obr/min - Število nožev: 28 kosov - Vrsta in velikost nožev: 40 x 40 mm - Lakiranje WEIMA standard RAL 2002 / 7016 - Priključna vrednost: 380 V +/- 5% / 50 Hz - Teža: 1.300 kg

Stanje: rabljeno, Leto izdelave: 1991, skupna dolžina: 1.660 mm, skupna višina: 1.470 mm, skupna širina: 1.100 mm, Lastna teža: 1.300 kg - Leto izdelave: 1991 - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne - Serijska številka: 500-1014 - Glavna moč motorja [kW]: 18,5 - Širina rotorja [mm]: 600 - Širina odprtine [mm]: 600 - Dolžina odprtine [mm]: 800 - Perforacija sita [mm]: 15 - Število rotirajočih nožev [kos]: 1 - Transportne mere: 1660mm x 1100mm x 1470mm (d x š x v) - Transportna teža [kg]: 1300 kg - Število transportnih paketov [kos]: 1 Fsdpfxjwu Uy Is Abvsfw Finančne informacije DDV: Naveden cena ne vključuje DDV DDV/Obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo Yorick Diebels

Stanje: novo, Leto izdelave: 2025, Leto proizvodnje: 2025/2 Moč motorja: 18,5 kW Hitrost: 90 1/min Teža: 1,3 t Dolžina rotorja: 600 mm Premer rotorja: 252 mm Noži na rotorju: 28 kosov Fjdpfovw Tw Esx Abvjfw Lijak: 600 x 1050 mm z dodatno rebrasto drsno ploščo

Stanje: novo, Leto izdelave: 2025, Leto izdelave: 2025/2 Moč motorja: 18,5 kW Hitrost: 90 1/min Teža: 1,3 t Dolžina rotorja: 600 mm Premer rotorja: 252 mm Ffjdpfxsrq Eu Rs Abvjw Noži na rotorju: 28 kosov Lijak: 600 x 1050 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Low-noise, slow-running WL 4/18.5 kW Technical specifications: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of blades: 28 pcs Blades: 40 x 40 mm, concave Fjdobtnftepfx Abvofw Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration elements Second blade row Log spacer (self-cleaning hopper) Top configuration Location: Ex stock Bitburg - immediately available - special price

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Low-noise & slow-running WL 4/18.5 kW Technical Data: Hopper opening: 600 x 800 mm Ffsdobunq Hopfx Abvew Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of knives: 28 pcs Knives: 40 x 40 mm concave Screen perforation: 15/20 mm Includes: Control cabinet Electric control system Star-delta starter Rubber oscillating elements Second row of knives Log spacer (self-cleaning hopper) Location: 54634 Bitburg Immediately available

Stanje: rabljeno, Leto izdelave: 2023, Demonstration machine! List price: €33,390. Machine Concept: Weima high-performance shredders, with their flexible applications, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips. In doing so, they achieve enormous volume reduction for bulky materials. Operation: The machine is equipped with a large feed hopper and can be loaded either via conveyor belt or manually. The hopper can be tailored to individual requirements and ensures a continuous and cost-effective material feed, negating the need for manual intervention. A hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor, with automatic, load-dependent control. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and can be adjusted as needed. The hydraulic cylinders are universally mounted to prevent lateral forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and fourfold indexable knives/cutting crowns are mounted in milled knife pockets on special knife holders. This patented system ensures – for the first time – minimization of the cutting gap between counterknife and rotor, enabling high throughput, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Standard Equipment: - V-rotor with one knife row (40 x 40 mm) - Vibration-damping machine feet - Hold-down device on the pusher - Horizontal pusher - Control cabinet with 5 m cable incl. PLC controller and LOGO! text display - Bolt screen - WEIMA WAP gearbox - Extraction port, Ø160 mm - Straight hopper Fsdpjvfy Rzjfx Abvofw Optional Equipment: - Additional rotor knife row (28 blades) - Anti-bridging hopper (LOGSPACER) - Segment floor, four-sided - Fast reverse hydraulics with shock valve Location: