Stroji za drobljenje Weima WL 4 1991

Weima WL 4

Stanje: rabljeno, Infeed opening: 800x600 mm Motor power: 18.5 kW Hopper capacity: 0.6 m³ Rotor diameter: 252 mm Operating hours: 1741 h Dimensions (L x W x H): 1650x1200x1595 mm Loading dimensions (L x W x H): 1650x1200x1800 mm Weight: 1300 kg WEIMA Shredder WL 4, machine fully overhauled ----- Note: The machine has been completely overhauled by us, runs perfectly, see video. Knives and pusher plate have already been replaced by the previous owner. Drive belts were replaced by us during overhaul. 1741 operating hours. Description: Weima high-performance shredders, with their flexible application options, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts etc.) into fuel chips. They achieve enormous volume reduction, particularly for bulky materials. Operation: The machine is equipped with a large feed hopper and can be filled by conveyor belt or manually. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feed without the need for manual assistance. The hydraulically operated pusher automatically and load-dependently feeds the wood waste to be shredded into the cutting area of the rotor. The inner pusher guides are made of highly wear-resistant plastic (polyamide) and can be readjusted. The hydraulic cylinders are mounted on universal joints to prevent lateral forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80-120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are housed in milled pockets on special knife holders. This patented system, thanks to the reduced cutting gap between counter-knife and rotor, guarantees high throughput, low energy consumption, and optimal discharge of the shredded material. The screen placed under the rotor determines the chip size (10-100 mm). On request, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a robust gearbox which is mounted on a stub shaft at one end of the rotor. Technical data WL 4 / 18.5 kW ----- Infeed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Screen diameter: 15 mm Coating: Weima standard RAL 2002 / 7016 Connection rating: 400 V +/- 5 % / 50 Hz Weight: approx. 1,300 kg Including: - Electric control system (Moeller / Siemens / Allen-Bradley) - Control cabinet (Rittal / Sarell) - Concave-ground reversible knives (40 x 40 mm) - Star-delta starting - Vibration-damping base Dodpfx Adoyrtzwe Ajup - Patented V-rotor with milled knife pockets (Technical details as provided by manufacturer - subject to change and without guarantee!)

Stanje: rabljeno, Sečnja hlodovine: 100–150 m³/h Sečnja manjših ostankov: 50–100 m³/h Djdohclffspfx Ad Aoup Teža: 3.165 kg Največji premer hloda: 254 mm Sekalnik Söderhamn Eriksson 670-56 CC z električnim motorjem. Sekalnik Söderhamn Eriksson 670-56 je namenjen izdelavi sekancev za proizvodnjo celuloze, vlaknenih in ivernih plošč. Za surovino se lahko uporabljata tako okroglo lesno deblo kot tudi odpadek iz žagarskih obratov. Podajanje lesa pri sekalniku 670-56 poteka vodoravno, pod kotom 37,5° glede na vlaknasto smer. Sekanci enakomerne, visoke kakovosti se lahko izločajo na dnu ali pa se odpihnejo naravnost navzgor. Bodite med tistimi lesno-predelovalnimi podjetji, ki znajo pametno upravljati z razpoložljivimi viri.

Stanje: rabljeno, obratovalne ure: 1.250 h, skupna masa: 1.500 kg, premer rotorja: 252 mm, skupna dolžina: 1.800 mm, skupna višina: 2.000 mm, skupna širina: 1.200 mm, širina rotorja: 600 mm, moč: 18,5 kW (25,15 KM), največja hitrost vrtenja: 90 obr/min, širina odprtine za polnjenje: 600 mm, dolžina polnilne odprtine: 800 mm, No. 3255 Duedpfx Adex Hhk Rs Asp Single-shaft shredder / Shredder WEIMA WL 4 Used, approx. 1,250 operating hours Quiet-running and slow-speed machine V-rotor system Main drive motor power: 18.5 kW Rotor diameter: 252 mm Rotor width: approx. 600 mm Rotor speed: approx. 90 rpm Hopper volume: 0.6 m³ Feed opening cross-section: 800 x 600 mm (L x W) Reversible blades, concave ground Automatic / Manual operation Screen perforation: 15 mm Extraction nozzle: 160 mm Transport dimensions: approx. 1800 x 1200 x 2000 mm (L x W x H) Weight: approx. 1,500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport or assembly Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner – no guarantee Subject to prior sale For used machines, any warranty is excluded; it is sold as seen Images and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 2026, Posebna cena – razstavni stroj Tehnične specifikacije WL 4 Odprtina lijaka z Logspacerjem 600 x 1.050 mm Volumen lijaka 0,6 m³ Delovna širina rotorja 600 mm Premer rotorja 252 mm Pogonska moč 18,5 kW Hitrost vrtenja rotorja 80–120 obr/min Število nožev 28 kos Tip in velikost nožev konkavno / 40 x 40 mm, izmenljivi rezalni kroni Velikost lukenj na situ 15–20 mm Barva WEIMA standard RAL 2002 / 7016 Priključna moč 400 V +/- 5 % / 50 Hz Teža pribl. 1.300 kg Vključeno: • Električna omara* (Rittal) vklj. električnim krmiljenjem (Moeller / Siemens) in zagonom zvezda-trikot • Gumijasti nihajni elementi • V-rotor (patentiran) z vrezanimi žepki za nože v profilu • Končno stikalo menjalnika • Nihajni potisnik • Polovičen hod potisnika • Lijak z Logspacerjem • 2. vrsta nožev Dsdjyl I Npspfx Ad Aoup Lokacija skladišča: dobavitelj

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 1 h, številka stroja/vozila: 268955558, GREMAC e1 Trommel screening plant Tandem chassis / axles 2x kg (permissible total weight) kg unladen weight without power unit Overrun brake Vehicle lighting in accordance with German Road Traffic Licensing Regulations (StVzO) TÜV approval Drum Length: mm Diameter: mm 4.0 kW electric drive Speed adjustable via frequency inverter Lifting screw Adjustable cleaning brush Hopper with conveyor belt Rubber belt with chevron profile 0.75 kW electric drive Speed adjustable via frequency inverter Duodpfel Hbcfox Ad Aep Fine material collection belt Movable suspension Smooth rubber belt 1.5 kW electric drive Speed adjustable via frequency inverter Fine material conveyor Movable suspension Rubber belt with chevron profile 2.2 kW electric drive Speed adjustable via frequency inverter 25° angle of inclination Manual cable winch for angle adjustment Oversize stockpile conveyor Movable suspension Rubber belt with chevron profile 1.5 kW electric drive Speed adjustable via frequency inverter 25° angle of inclination Manual cable winch for angle adjustment Control system Siemens Logo PLC Control panel with buttons and potentiometers 400V power circuit 24V control circuit Main switch Ceekon 16A socket Emergency stop relay Without generator Cladding Hot-dip galvanized frame parts Painted drum Covers powder-coated in RAL7005 and RAL5018 Further information Application: Construction General condition: very good Technical condition: very good Visual condition: very good Delivery terms: EXW

Stanje: zelo dobro (rabljeno), obratovalne ure: 820 h, Zariadenie na spracovanie zvyškového dreva WEIMA Model: WL 4 Vstupný otvor: 600 mm x 800 mm Objem násypky: 0,6 m³ Výkon: v závislosti od materiálu a sita Priemer rotora: 252 mm Otáčky rotora: 60 - 100 ot./min Výkon motora: 18,5 kW Nástroje: 14 nožov Veľkosť otvorov sita: 20/25 mm Priemer odsávacej prípojky: 160 mm Rýchlosť prúdu vzduchu: 28 m/sec Hmotnosť: cca 1 200 kg Rozmery (d x š x v): 1600 x 1150 x 1655 mm Vrátane všetkej dokumentácie Upozornenie k použitým strojom: • Technické údaje bez záruky, platí vyhradenie práva na predchádzajúci predaj. • Uvedené ceny platia EXW – naloženie v cene! • Stroje boli vyčistené a odskúšané na funkčnosť. • Všetky stroje sa predávajú v stave 'ako boli videné', bez akýchkoľvek nárokov na záruku. Kupujúci si môže stroje osobne prezrieť na mieste. • Osobitné dohody sú platné len v písomnej forme. (Na otázky odpovedáme iba s uvedením vašej adresy a telefónneho čísla!) Duedpfx Adeylaf Ae Asp

Stanje: rabljeno, Leto izdelave: 1993, Moč: 18,5 kW Število nožev: 28 Teža: 1300 kg WEIMA drobilnik WL 4 Dujdpfx Adoyk H Tqs Aep - Leto izdelave: 1993 - Serijska št.: 500/1695 - Odlično stanje, malo rabljen Tehnični podatki: - Odpiranje lijaka z Logspacerjem: 600 x 1000 mm - Prostornina lijaka: 0,6 m³ - Delovna širina rotorja: 600 mm - Premer rotorja: 252 mm - Pogonska moč: 18,5 kW - Hitrost vrtenja rotorja: 80 - 120 obr/min - Število nožev: 28 kosov - Vrsta in velikost nožev: 40 x 40 mm - Lakiranje WEIMA standard RAL 2002 / 7016 - Priključna vrednost: 380 V +/- 5% / 50 Hz - Teža: 1.300 kg

Stanje: zelo dobro (rabljeno), Kataloška številka 6726 TEHNIČNI PODATKI - Vhod lijaka za polnjenje: 280x300mm - Izhod za zdrobljen les: premer 310mm - Delovna širina rotorja: 340mm - Glavni motor: 22kW - Število nožev: 6 kosov - Dimenzije (d/š/v): 1300x1150x1680mm - Teža: 720kg Djdpsignt Uefx Ad Ajup PREDNOSTI – Zelo dobro stanje – Rabljen sekalnik Neto cena: 19.900 PLN Neto cena: 4.740 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih valutnih nihanjih se cena lahko spremeni)

Stanje: novo, Leto izdelave: 2025, Leto proizvodnje: 2025/2 Moč motorja: 18,5 kW Hitrost: 90 1/min Teža: 1,3 t Djdpfx Adevw Tw Eo Ajup Dolžina rotorja: 600 mm Premer rotorja: 252 mm Noži na rotorju: 28 kosov Lijak: 600 x 1050 mm z dodatno rebrasto drsno ploščo

Stanje: novo, Leto izdelave: 2025, Leto izdelave: 2025/2 Moč motorja: 18,5 kW Duedpsrq Eu Rofx Ad Asp Hitrost: 90 1/min Teža: 1,3 t Dolžina rotorja: 600 mm Premer rotorja: 252 mm Noži na rotorju: 28 kosov Lijak: 600 x 1050 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Zlagalnik paletnih desk PBS M4 – Avtomatski zlagalnik za proizvodno linijo palet Duedpfjhhnblox Ad Aep Avtomatski zlagalnik paletnih desk, zasnovan za učinkovito integracijo v proizvodne linije za palete. Zagotavlja natančno poravnavo desk, stabilno zlaganje in visoko proizvodno zmogljivost z minimalnim ročnim rokovanjem. Vključen komplet: - Krmilni program - Zlagalnik z integriranim dvigalom - Razdruževalec desk - 2 dozirnika distančnikov z nosilnim ogrodjem - Izvozna transportna naprava z dvigalno ploščadjo - Dvigalo za pakete za enostavno rokovanje z viličarjem - Primerno za neprekinjeno industrijsko proizvodnjo paletnih desk.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Low-noise, slow-running WL 4/18.5 kW Djdpjbtnftefx Ad Aeup Technical specifications: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of blades: 28 pcs Blades: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration elements Second blade row Log spacer (self-cleaning hopper) Top configuration Location: Ex stock Bitburg - immediately available - special price

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Low-noise & slow-running WL 4/18.5 kW Technical Data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of knives: 28 pcs Dedpfx Aebunq Hsd Ajup Knives: 40 x 40 mm concave Screen perforation: 15/20 mm Includes: Control cabinet Electric control system Star-delta starter Rubber oscillating elements Second row of knives Log spacer (self-cleaning hopper) Location: 54634 Bitburg Immediately available

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 650 mm, skupna dolžina: 1.150 mm, skupna višina: 1.700 mm, Cable shredder, cable granulator, cable granulation plant, cable granulation machine Net price: €6,000.00 Djdpfxswgkhle Ad Asup Technical specifications: Shredder power supply: 380 V Total power: 5.67 kW Input size range: 0 - 30 mm Weight: 500 kg Dimensions: 1150 mm x 650 mm x 1700 mm Cable processing capacity: approx. 50-70 kg/h

Stanje: rabljeno, Leto izdelave: 2023, Demonstration machine! List price: €33,390. Machine Concept: Weima high-performance shredders, with their flexible applications, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips. In doing so, they achieve enormous volume reduction for bulky materials. Operation: The machine is equipped with a large feed hopper and can be loaded either via conveyor belt or manually. The hopper can be tailored to individual requirements and ensures a continuous and cost-effective material feed, negating the need for manual intervention. A hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor, with automatic, load-dependent control. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and can be adjusted as needed. The hydraulic cylinders are universally mounted to prevent lateral forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and fourfold indexable knives/cutting crowns are mounted in milled knife pockets on special knife holders. This patented system ensures – for the first time – minimization of the cutting gap between counterknife and rotor, enabling high throughput, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Standard Equipment: - V-rotor with one knife row (40 x 40 mm) - Vibration-damping machine feet - Hold-down device on the pusher - Horizontal pusher - Control cabinet with 5 m cable incl. PLC controller and LOGO! text display - Bolt screen - WEIMA WAP gearbox - Extraction port, Ø160 mm - Straight hopper Optional Equipment: - Additional rotor knife row (28 blades) - Anti-bridging hopper (LOGSPACER) - Segment floor, four-sided - Fast reverse hydraulics with shock valve Dujdpfx Adovfy Rzj Asp Location: