Dvoosni drobilnik Weima HWN-2-1000

Weima HWN-2-1000

Stanje: kot nova (razstavni stroj), Leto izdelave: 2012, številka stroja/vozila: 925624, KUKA unused surplus stock KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Hedpfx Aorfch Uof Tsfb Weight: 1412 kg Serial number: 925625 Includes connection cables: X21/X31 (00-108-948) 25 m and X20/X30 (00-104-744) 25 m Control cabinet KRC2 ED05, serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2, used, fully functional / Serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185° Axis 2: -140° / -5° Axis 3: -120° / 155° Axis 4: ± 350° Axis 5: ± 122.5° Axis 6: ± 350° Robot axis speeds in °/s: Axis 1: 105°/s Axis 2: 107°/s Axis 3: 114°/s Axis 4: 136°/s Axis 5: 129°/s Axis 6: 206°/s

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), skupna masa: 2.600 kg, Leto izdelave: 2006, Cutting width: 600 mm Hsdpfxjtzbvyj Af Tjfb Cutting length: 1200 mm Center distance between knife shafts: 250 mm Knife shaft speed: approx. 16 rpm Knife shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Total drive power: 22 kW Weight: 2,600 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, Stroj za izdelavo knjižnih platnic - Naprava za obdelavo rolanih materialov - Obdelava s toplim lepilom - Naprava za nadzor viskoznosti - Magazin za kartonske obrobe - Naprava za rezanje kartona PS Hfjdpjv Uh Nkofx Af Teb - Naprava za obešanje in prevleko v dveh delovnih korakih - Naprava za obdelavo asimetričnih platnic

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The copper wire granulator can recycle scrap copper wire into separated copper and plastic. The processing capacity is 100–180 kg/h, and the dry mechanical shredding process causes no environmental pollution. For sale is the granulator, including a pre-shredder and a conveyor belt with magnet. Design and Manufacturing 99.99% Outstanding Efficiency and Reliability, Advanced Technology: ● Airflow gravity sorting system for separating copper particles from insulation. ● Powerful vibrating separator to ensure clean separation of copper granulate from insulation by weight. ● Self-cleaning dust collection system to minimize maintenance time and eliminate dust. ● Compact design with a small footprint. Hsdpfsu Tq S Hjx Af Tofb ● 99.99% pure copper recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical Specifications Model: GRS 180KG Voltage: 380V Power: 8.7 kW Frequency: 50 Hz Processing capacity: 100-180 kg/h Dimensions: 80*137*204 cm Net weight: 518 kg

Leto izdelave: 2023, Stanje: novo, Brand: Damatt Model: CA-30 Year of Manufacture: Unused, 2023 Hfsdpfx Afjltmdfo Teb Serial Number: On request Capacity (kVA): 37.5 prime / 41 standby Capacity (kW): 30 prime / 33 standby Engine Model: K4100D Fuel: Diesel Alternator Model: STC-30 Voltage: 400 V Frequency (Hz): 50 RPM: 1500 Amperage (A): 54.1 Dimensions LxWxH (mm): 2200 x 850 x 1120 Weight (kg) approx.: 730 Units in stock: 15 Country of Manufacture: China Comments: Unused soundproof diesel generator, Wisdongen genset controller.

Stanje: novo, Leto izdelave: 2023, Oscillating sanders are designed for sanding straight, curved, and shaped parts with round or oval cross-sections etc., as well as with variable thickness for chairs, tables, beds, and related items. The main features of the machine include: frame made of electro-welded steel – rotating disc with two counter-rotating sanding belts driven by an electric motor, with a rotary movement around the workpiece – electrical control panel – 2 adjustable work tables (infeed – outfeed) – option for integration of 2 automatic workpiece feed units with adjustable speed via frequency inverter. Sanding belts: 80 x 1260 mm Min./max. workpiece diameter: 10–100 mm (Ø) Min. bending radius: 200 mm Dimensions: 760 x 1000 x 1800 mm Hjdpfx Aeqnufvsf Tsfb 3 units available Camam, Comec, OMEF, Brusa di Garboli

Stanje: rabljeno, težka skobeljna SCM F 520 Širina skobljanja 520 mm Dolžina mize 2.960 mm hidravlično nastavljanje višine dovajalne mize z nožnim pedalom, z mikrometrskim prikazom odvzema ostružkov varnostni 4-nožni rezalni valj Hodexzdgujpfx Af Tsfb nastavitev spojnih robov (ravnih in konkavnih) glavni motor 4 kW električna zavora motorja Izvedba CE Stroj je DELOVNO SPOSOBEN v DOBREM STANJU, iz poklicne šole Na zalogi v Liebochu

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm Hjdpfx Afot R T Hce Tofb - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: delavnici obnovljeno (rabljeno), Popolnoma obnovljen transportni trak za hlode, dolžine 8 metrov Hsdpfx Ajncft Ujf Tofb

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Hfjdpfohw Ng Iox Af Teb Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit