Stružnica pribor

Weiler Primus

Stanje: zelo dobro (rabljeno), WEILER PRIMUS Tip MD-G Kdsdpfexw H Dbjx Adisw - Višina konic: 125 mm - Razdalja med konicama: 400 mm - Območje vrtljajev: 40–3000 vrt/min - Premer vretena: 24 mm - Električna zaščita vpenjalne glave - Sistem Multifix z vložki - Reitstock z vrtalno pinolo - Vpenjalna glava s štirimi čeljustmi - Delovna svetilka - Omejevalnik postelje - Dokumentacija Mere: D x Š x V: 1,3 x 0,8 x 1,6 m / Teža: 450 kg Možnost napak ali napačnih vnosov pridržana.

Stanje: rabljeno, Leto izdelave: 2007, Spindle speed: 6,000 rpm Tool holder: BT50 Number of toolchanger stations: 121 Control: FANUC 31iMA Horizontal machining center | TOYODA - FH630SX equipped with through-spindle coolant (IKZ) and chip conveyor. Additional features: + NC rotary table 360,000 x 0.001° The machine is in well-maintained condition. Kedpfxet I Ec De Adisdw Technical specifications will follow shortly. ----- #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Data: Kdedpfou Afqlox Adisw >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 2-axis digital readout from Heidenhain >> 1 new 125 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck system with brand new collets, range from 3 mm up to 25 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Rear splash guard About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to view this machine on-site under power and see its condition for yourself.

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Kjdjrtd Uwepfx Adiedw Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 36 mm, višina središča: 155 mm, stružna dolžina: 800 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 25 obr/min, used centre lathe Weiler Condor, No. 7939, Kdjdjv R Tdxspfx Adisw Centre height: 155 mm Centre distance: 800 mm Spindle speeds: 12–2800 rpm Spindle bore: 36 mm Accessories: 1x 3-jaw chuck RÖHM, Ø 160 mm, Multifix base unit size B with 2 inserts, keyless drill chuck, live centre, and coolant system. The machine is located in our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, For sale: WEILER lathe, model Primus LZ-GS The machine is in excellent condition. Technical specifications: Year of manufacture: 1989 Machine no.: 4443 Operating voltage: 380 V Kodpfx Aeihig Iedijdw Centre height: 120 mm Centre distance: 430 mm Spindle speed: 60 - 3,000 rpm with 18 geared steps Spindle bore: 23 mm Short taper spindle nose, DIN 55027 Tailstock: MT 2 Feeds: 0.03 to 0.15 mm/rev Threads possible: metric, imperial, module, and diametral-pitch Metric thread pitches: 0.25 to 2.5 mm Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Prices are subject to VAT. Inspections are possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: Kodpsu Aftgefx Adisdw >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 9.965 h, - RABLJEN - 3-OSNI VERTIKALNI OBDELOVALNI CENTER Z ROTO-PALETO POMIK X-OSI: 560 mm POMIK Y-OSI: 400 mm POMIK Z-OSI: 570 mm RAZDALJA VRH VRETENA-MIZA: 210 - 780 mm HITRI POMIKI X-Y-Z: 40 - 40 - 32 m/min VRETENO: 80-10.000 min⁻¹; 15-18,5 kW; ISO 40 - BT PALETA: 2 kos.; 712 x 475 mm MAKS. DOVOLJENA OBREMENITEV: 300 x 2 kg VISOKOTLAČNO HLADILNO SREDSTVO: 15 bar MENJALNIK ORODIJ: VERIŽNI TIP; 32 POZICIJ MAKS. PREMER ORODJA: 90 (150) mm Kdodpfx Adoq Nqkxeijw MAKS. DOLŽINA ORODJA: 300 mm MAKS. TEŽA ORODJA: 8 kg KRMILNA ENOTA: FANUC 21i - MB TEŽA: 7600 kg SKUPNE DIMENZIJE: 3010 x 3450 x 3145 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 Kdjdpfevtp Edex Adisw - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Specifications: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 Kjdpfswkh Abjx Adijdw >> Tailstock taper: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitch from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Features: >> New collet chuck system, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in excellent condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and enables ground-finish surfaces to be produced. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Kdedpsqwgzqsfx Adijw Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Kdodevkfhpspfx Adiow Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 Ksdjvivmyjpfx Adisdw >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: rabljeno, Leto izdelave: 2005, Splošne informacije: - Model: ROBODRILL α-T2 STAMA - Serijska številka: 046VH155 - Leto izdelave: 2005 - CNC krmilnik: FANUC (model A04B-0094-B111#BD) - Teža: 2.200 kg - Napajanje: 200 V, 50/60 Hz, trifazno - Priključna moč: 10 kVA ----- Obdelovalne zmogljivosti: Kodpfxjuru I Rj Adijdw - Operacije: - Rezkanje (visokohitrostno in zelo natančno rezkanje) - Vrtanje - Tog navojni rez (rigid tapping) ----- Hodi osi: - Premik X-osi: ~500 mm - Premik Y-osi: ~400 mm - Premik Z-osi: ~330 mm ----- Vreteno: - Konus vretena: BT30 - Standardna hitrost vretena: do 10.000 min⁻¹ (vrt./min) ----- Menjalec orodij: - Tip: avtomatski menjalec orodij - Čas menjave orodja: ~1,6 sekunde ----- Hitro pomikanje: - Hitrost hitrega pomika: 54 m/min na oseh X, Y in Z ----- Ključne lastnosti: - Kompaktna struktura za visoko togost - Visoka produktivnost z izjemno hitrimi cikli vrtanja in navojev - Enostavno vzdrževanje (integriran FANUC diagnostični vmesnik) - Združljivost z avtomatiziranimi proizvodnimi celicami (so-označevanje s STAMA)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Primus VC Precision Centre Lathe 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Speed and CE. Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT3 >> Feeds from 0.02 to 0.63 mm/rev >> Available threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Equipment and Accessories: >> 3-axis digital readout K&C NEW >> Collet device with collets 3 to 26 mm, new, incremented by 1 mm, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Kdodpfx Adjw Idlljiow >> Electronic chip guard >> Machine feet >> Splash guard About the Machine: For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. An excellent lathe with VC drive and infinitely variable speed control of the main spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is user-friendly and allows for producing surface finishes comparable to grinding. The K&C digital readout further simplifies and improves accuracy of operation. You are welcome to inspect the machine powered up at our premises and convince yourself of its condition.