Vzporedna stružnica

WEILER PRIMUS

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Nasadni konjiček: MK 2 Pogon: 1,5 kW Todpew I A Uxofx Abgsf Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Primus VC, letnik 1999, z 3-osnim digitalnim prikazovalnikom Siemens, trizajčnim vpenjalom, Multifixom, zadnjo zaščito proti pršenju in električno zaščito vpenjala. Stroj je v dobrem, delujočem stanju, po dogovoru možen prikaz v obratovanju. Tsdpfxjx Afvgj Abgef

Stanje: pripravljen za uporabo (rabljen), Weiler Primus stružnica Precizna stružnica z dodatki Weiler Primus stružnica: Višina konice: 125 mm Območje vrtljajev: 40-3000 min⁻¹ Razdalja med konicama: 400 mm Premer vretena: 24 mm Dodatki: 35 kos vpenjalnih tulec Vpenjalna glava 4 nosilci Multifix Omara za dodatke Ostala dodatna oprema glejte slike Vabljeni na ogled. Na zahtevo lahko za vas organiziramo ugoden prevoz! Prejmete uraden račun. Za tuje stranke je možen tudi račun brez DDV, pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Tjdjxw R N Ujpfx Abgef Obiščite našo trgovino in si oglejte tudi ostalo ponudbo. Navedenih imena podjetij in blagovne znamke so last njihovih imetnikov in služijo le za identifikacijo in opis izdelkov. Možne so razlike v tehničnih podatkih ter napake v opisu, pridržujemo si pravico do sprememb.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 Tedpfxeu Aftgj Abgof >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), WEILER PRIMUS Tip MD-G - Višina konic: 125 mm - Razdalja med konicama: 400 mm - Območje vrtljajev: 40–3000 vrt/min - Premer vretena: 24 mm - Električna zaščita vpenjalne glave - Sistem Multifix z vložki - Reitstock z vrtalno pinolo - Vpenjalna glava s štirimi čeljustmi - Delovna svetilka - Omejevalnik postelje - Dokumentacija Mere: D x Š x V: 1,3 x 0,8 x 1,6 m / Teža: 450 kg Todpexw H Dbjfx Abgef Možnost napak ali napačnih vnosov pridržana.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders Tjdpfxjvtp Edj Abgof - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Specifications: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitch from 0.25 to 2.5 mm Tedpfx Aowkh Abebgjf >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Features: >> New collet chuck system, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in excellent condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and enables ground-finish surfaces to be produced. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube Tjdpfx Abevkfhpsgjf • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Todpfx Ajvivmyebgef >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Primus VC Precision Centre Lathe 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Speed and CE. Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT3 >> Feeds from 0.02 to 0.63 mm/rev >> Available threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Equipment and Accessories: >> 3-axis digital readout K&C NEW >> Collet device with collets 3 to 26 mm, new, incremented by 1 mm, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electronic chip guard >> Machine feet >> Splash guard Tsdpfow Idlljx Abgsf About the Machine: For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. An excellent lathe with VC drive and infinitely variable speed control of the main spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is user-friendly and allows for producing surface finishes comparable to grinding. The K&C digital readout further simplifies and improves accuracy of operation. You are welcome to inspect the machine powered up at our premises and convince yourself of its condition.