Sredinski stružnica in stružnica za vreteno

WEILER PRAKTIKANT

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Lead and feed screw lathe WEILER "PRAKTIKANT GS" With 3-axis Heidenhain digital readout Year of manufacture: 2007 Spindle bore: 40 mm Distance between centers: 750 mm Swing over bed: 320 mm Speed range: 48–2500 rpm Including the following accessories: - Multifix tool holder - 8 Multifix toolholder inserts - Collet chuck with 55 collets - Chuck guard - Chip guard/rear splash guard - 1 x 3-jaw chuck RÖHM Ø 160 mm - 1 x 4-jaw chuck RÖHM Ø 160 mm - 1 x fixed steady rest Cjdpfx Aajw Agwus Rohc - Machine lamp - 3 revolving/rotating live centers - 1 drill chuck - 6 height-adjustable machine feet - Tailstock with quill - Operating manual THE MACHINE IS IN EXCELLENT CONDITION!! THE MACHINE COMES FROM A TRAINING WORKSHOP!!

Leto izdelave: 1986, Stanje: rabljeno, Weiler Praktikant 160 lathe, year of manufacture 1986, equipped with 3-axis Heidenhain digital readout, three-jaw chuck, Multifix tool post, and chuck guard. Approximate weight: 1,000 kg. The machine is in good, operational condition and can be demonstrated under power by prior arrangement. Chodpfx Ajrg Dudsa Rjc

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: Used, very good, serviced and inspected with factory test report Technical Specifications Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed carriage: 320 mm Maximum swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle bearing diameter (front): 70 mm Spindle bore: 40 mm Usable bar capacity: 40 mm Toolpost: System: MultiFix B Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80-2 1/” Module: 0.25 – 4 mm Travel paths: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – 3-jaw chuck Chsdoxd Tknjpfx Aa Rec – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Lead and Feed Screw Lathe Make: WEILER Model: PRAKTIKANT 160B Year: 1992 Technical Specifications Manufacturer: Weiler Model: Praktikant 160B Centre Distance: 650 mm Swing over Bed: 320 mm Cjdpfx Aajtu Hu Ij Rjhc Swing over Cross Slide: 192 mm Centre Height: 160 mm Spindle Bore: 40 mm Rated Power: 2.4 / 3 kW Spindle Speeds: 48 – 2500 rpm Dimensions (approx.): L 2.20 x W 1.10 x H 1.40 m Weight (approx.): 1 t Accessories • 3-jaw chuck • Emergency stop All information subject to change and without guarantee. A demonstration can be arranged at any time in our showroom.

Stanje: dober (rabljeno), Leto izdelave: 1996, Stroj je v dobrem tehničnem stanju, testiranje je možno po predhodnem dogovoru. Stružnica WEILER Praktikant 160 AC Leto izdelave: 1996 Serijska številka: 4057 Premer nad ležiščem: 320 mm Dolžina med konicama: 650 mm Premer nad sani: 160 mm Premer vretena: 35 mm Hitrost: 48 – 2500 o/min Moč: 4 kW Dimenzije: 500 x 1240 x 1550 mm Teža: 680 kg Csdpfxexfa Sne Aa Rjhc

Stanje: rabljeno, L + Z Lathe WEILER Type Praktikant 800R Machine No. 2997 Year of manufacture: 1982 Centre distance: 800 mm Swing over bed: 280 mm Swing over carriage: 160 mm Centre height over bed: 140 mm Centre height over carriage: 80 mm Spindle bore: 36 mm Feed: longitudinal and cross Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 0.8 / 1.6 kW Power supply: 380 Volt, 50 Hz - 3-axis digital readout SINO, type SDS 6-3V - Spindle speed adjustable via 2 motor speeds and 8 gear stages - 3-jaw wedge-bar chuck BISON Ø 165 mm with 1 set of reversible hard jaws - 1 set base jaws with soft top jaws - MULTIFIX size A quick-change toolpost with 3 tool holders - Live centre - Emergency stop - Hinged chuck guard - Splash guard panel - Without coolant device (electrically prewired) Chjdpfx Ajupbfqsa Rec Space requirement (L x W x H): 1800 x 800 x 1750 mm Weight: 600 kg Very good condition

Stanje: rabljeno, Leto izdelave: 1989, Swing diameter over bed: 300 mm Swing diameter over cross slide: 150 mm Turning length: 800 mm Spindle bore: 36 mm Speed range: 42 - 2000 rpm Feed rates: 0.011 - 0.91 mm/rev Cjdpfx Ajrdwfzoa Rshc Tailstock quill taper: MT 3 Total power requirement: 2.2 kW Machine weight: approx. 0.75 t Space requirements: approx. 1.7 x 0.8 x 2.0 m The machine was operated at a school centre and was used very little!

Stanje: rabljeno, Turning length 800 mm Turning diameter 280 mm Turning diameter over cross slide 150 mm Spindle bore 42.0 mm Tailstock quill taper MK 3 Bed width 208 mm Spindle speed 42 - 2022 rpm Chsdpfx Aaexacg Rj Rec Spindle mount DIN 55027/5 Quill stroke 90.0 mm Voltage 380 V Total power requirement 3.0 kW Machine weight approx. 750 kg Dimensions (LxWxH) 1800 x 800 x 1250 mm Due to its design (construction type, power, feeds, etc.), it is ideally suited for use both in training workshops as well as for toolmaking and repair shops. Equipment: - Robust conventional lead and feed screw lathe - WMW 3-jaw chuck Ø 150 mm - Faceplate 280 mm - MULTIFIX quick-change toolpost with insert - Sliding tailstock - Chuck key - Machine base with storage compartment - Pole-changing drive motor - Operating manual

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: Used, very good, serviced and inspected with factory test report Technical Specifications Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed carriage: 320 mm Maximum swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle bearing diameter (front): 70 mm Spindle bore: 40 mm Usable bar capacity: 40 mm Toolpost: System: MultiFix B Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80-2 1/” Module: 0.25 – 4 mm Travel paths: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – 3-jaw chuck – Tailstock Csdpfjxd Tkbjx Aa Rehc – Multifix tool holder – 8x machine feet – Original tool set

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, As-New Condition, Year of Manufacture 2019 Technical Data: >> Year of Manufacture: 2019, Machine No. OD08 >> Center height: 160 mm >> Swing over bed: 320 mm Chedpfx Aasw Swkvo Rec >> Swing over cross-slide: 190 mm >> Distance between centers: 650 mm >> Spindle speeds from 30 to 4000 rpm (stepless) >> Spindle bore: 43 mm >> Camlock spindle nose, DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Number of feeds: 24 >> Longitudinal feed: 0.02 to 0.63 mm/rev >> Cross feed: 0.006 to 0.2 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 1150 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L) x 1.7 m (H) x 0.89 m (D) Accessories and Equipment: >> Weiler digital position display >> Collet chuck system, new collets from 3 to 26 mm >> 160 mm three-jaw chuck with one set of jaws >> Multifix size B quick-change tool post with 3 holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts list For safety: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Position Display: >> 8-inch color screen >> 3 axes for bed, cross-slide, and compound slide >> 99 tool memory >> Oriented spindle stop >> Option to input constant speed or cutting speed >> Feed and thread settings displayed >> Thread cutting with electronic stop About the Machine: Offered is a Weiler Praktikant VCD precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2019, in as-new condition and original paint. The machine is, of course, fully functional and equipped with new collets and chuck. Take advantage of the opportunity to inspect this machine under power on site and see its condition for yourself.