Obdelovalni center CNC z varovalom "hedgehog buffer

Weeke Optimat BHX 500

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-250-12-2554, dolžina obdelovanca (maks.): 3.000 mm, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 80 mm, TECHNICAL DETAILS Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Number of vertical electrospindles: 1 Power of vertical electrospindle: 6 kW Grooving saw (90° on the X-Y axis), diameter: 125 mm Number of vertical drilling spindles: 32 Power of vertical drilling spindles: 2.7 kW Number of horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Power of vertical electrospindle: 6 kW Grooving saw (90° on the X-Y axis), diameter: 125 mm Number of vertical drilling spindles: 32 Power of vertical drilling spindles: 2.7 kW Number of horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Numerical control: PC 85 Software: woodWOP 6 Electrical data Prsdpfx Agexx R Slsped Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Control voltage: 24 V EQUIPMENT Simultaneous machining of two panels Safety enclosure for the working head 2 clamps for securing and moving the workpiece Loading table with air cushion Panel discharge via motorized roller conveyor Safety system with perimeter fencing and front safety mats

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 1.195 kg, volumenski pretok: 7,25 m³/h, obratovalni tlak: 13 letvica, vhodna napetost: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Pjdpjt Hdh Nefx Agpord Variable speed drive (inverter controlled) Equipped with a refrigerated air dryer Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h The compressor is fully operational

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Ta 3-osni stroj HOMAG WEEKE OPTIMAT BHX 500 je bil izdelan leta 2011. Ponaša se z robustnim CNC obdelovalnim centrom z delovnim območjem 2500 mm x 1300 mm, glavno elektro vreteno ima moč 6 kW, največja debelina obdelovanca pa je 80 mm. Vključuje 84 vrtalnih vreten in dvojni rezkalni vreteni, vsaka z močjo 6 kW pri 18.000 vrtljajih/min. Če želite kakovostne CNC zmogljivosti, razmislite o stroju HOMAG WEEKE OPTIMAT BHX 500, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Podpfx Agsxqh T Dspord Vrste uporabe CNC obdelava lesa

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Homag Weeke Optimat BHX 500 20KW machining centre Prsdow A R Iqopfx Agpsd Machine in excellent condition Located in department 14 Dismantling, loading, and transport at buyer’s expense

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW Pjdpfx Aoxfaf Ujgpord n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.

Leto izdelave: 2008, Stanje: rabljeno, Panel return system for use with a single edge banding machine The panel is transported to the operator via a motorized conveyor belt and a roller/conveyor table. Prodpfxjrxzb Re Agped Moeller mini control unit Maximum panel dimensions: 2500 x 1450 mm Maximum panel height: 60 mm Working speed: 8 - 25 m/min Working height from floor: 835 - 960 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Buderus GB312 gas condensing boiler Output: 160 kW Inspection by appointment only – please call to arrange! Psdpfxsmnqb Ej Agperd Preferred sale to dealers, commercial users, or for export. All information provided without guarantee; subject to errors and prior sale. The seller accepts no liability for typographical or data transmission errors. We can of course handle all formalities for you. Loading available.

Stanje: novo, Leto izdelave: 2025, Delovno območje: 6100 mm × 1524 mm / 4000 mm × 1524 mm / 3048 mm × 1524 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W / 1000 W Pedjg Eglpspfx Agpsrd Natančnost pozicioniranja: ±0,05 mm Ponovna natančnost pozicioniranja: ±0,03 mm Maksimalna usklajena hitrost: 91 m/min Maksimalno pospeševanje: 1G 1. Raztegnjen aluminijast nosilec Letalsko-kakovosten material z izboljšano togostjo bistveno zmanjšuje deformacije nosilca pri visokih hitrostih ter povečuje občutljivost in učinkovitost obdelave pri visokih hitrostih. 2. Posteljna konstrukcija z ugreznjenimi spojkami (Tenon-and-mortise) Uporablja tradicionalno kitajsko spojno tehniko "tenon and mortise" za večjo nosilnost. Priključne točke za varjenje in nosilna konstrukcija zagotavljajo dolgoletno stabilnost delovanja. Varjena konstrukcija prispeva k boljši absorpciji vibracij, zmanjša odklone ob tresljajih ter omogoča natančnejše rezanje. 3. Dvojni avtomatski centrirni električni vpenjalniki Dvojna električna vpenjalnika z avtomatsko centrirno funkcijo sta enostavna za uporabo in zahtevata minimalno vzdrževanje. Nov motor omogoča natančen nadzor. Modularne komponente vpenjalnika so samostojno razvite ter jih je mogoče hitro zamenjati. 4. Avtomatska funkcija ostrenja laserske glave Z nastavitvijo perforacijske in rezalne žariščne razdalje posebej je rezanje natančnejše. Primerna za različne žariščne razdalje – položaj žarišča se samodejno prilagodi glede na debelino posameznih pločevin. 5. Funkcija alarma pri nizkem tlaku plina Sproten nadzor tlaka plina in javljanje nepravilnosti zagotavljata kakovost in natančnost reza ter pravočasno opozorita upravljavca na potrebo po zamenjavi plina.

Stanje: novo, Neue Ausrüstung, hergestellt in Dänemark. Hubzeit: 18 Sekunden. Be- und Entladen mittels Palettenhubwagen. Die Lasten werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbedienung für Heben/Senken mit Not-Aus-Funktion. Leistungsaufnahme: 0,75 kW. Tragfähigkeit: 1.000 kg. Spannung: 3 x 400 V. Podpfx Agod Hp Efepord Minimale Hubhöhe: 80 mm. Maximale Hubhöhe: 780 mm. Außenmaße: 1.420 x 1.140 mm. Innenfreiraum: 585 mm. Hub-/Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg.

Stanje: rabljeno, številka stroja/vozila: 007734, Delovno območje os X: 3050 mm Delovno območje os Y: 850 mm Moč glavnega vretena: 5 kW Prodpfow Idb Hsx Agpsd Število vrtalnih vreten: 19