Različne

Wahli-Stream Feeder TM 530

Leto izdelave: 2025, Stanje: novo, A workshop cabin washing machine made from AISI 304 stainless steel and acid-resistant AISI 316 steel, designed for professional use across a wide range of industries and the automotive sector. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner solution, which, when combined with optimal temperature and spray gun pressure, effortlessly removes all types of contaminants. Standard features include a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically raised wash chamber, and a height-adjustable frame for operator convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with a flow rate of 5 L/min - Compressed air gun up to 8 bar - Heated 90-liter solution tank - LED lighting - Air blower for the inspection window - Pneumatic chamber opening mechanism - Fluid level and temperature sensors - Dual fluid filtration system - Integrated oil separator (effectively separates oil contaminants from water in the tank) - Dual foot-operated switches - Height-adjustable leveling feet up to 100 mm Chjdpfogvaazex Afqjf - Fully made of stainless steel - Protection rating: IP 54 - XPOWER Active Cleaner solution, 5 L (two versions available) OPTIONAL ACCESSORIES FOR MASTER CLEANER MC1000: - Spray arm - Rotary basket - Rotating nozzle - Nozzle for cleaning collectors - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with chamber open (cm): 125 x 85 x 235 - External dimensions with chamber closed (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic pressure: 6 - 8 bar - Maximum power output: 7.5 kW - Pump operating pressure: 140 bar - Solution working temperature: up to 45°C - Air connection: pneumatic quick coupling, plug DN 7.2 - Safety features: temperature sensor, emergency stop switch, end switch - Protection rating: IP 54 VARIOUS MACHINE VERSIONS AVAILABLE: CONTACT US TO LEARN MORE ABOUT OTHER MODELS.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Hainbuch centroteX Quick Change System (Year 2019) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Draw tube connection: M85x2 o Length: 53 mm o Bore: 78 mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o Item no.: 10000678 o Length: 136 mm • 1x TOPlus mini Axzug size 65 (A038530.008C) o Item no.: 10000676 o Length: 134.5 mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179 mm o Diameter: 210 mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155 mm o Diameter: 257 mm • 1x monteq quick change system (A012708.0009B) • 1x Roll container D400 Codsv Ivakepfx Afqjhf o Storage for the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side • Operating instructions/manuals • 1x toolbox with accessories Accessories: • Clamping head TOP65 (serrated, for raw material): o 1 pc. each → d12, 20, 30, 36, 40, 50, 55, 60, 65 mm • Clamping head TOP65 (hexagon): o 1 pc. each → SW36, 45, 46, 50 • Clamping head TOP65G (smooth): o 1 pc. each → d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 mm o 2 pcs. → d38 mm • 1x extraction ring for clamping head 65 • Total of 50 clamping heads • Accessories for jaws: o for HWR 4-jaw chuck:  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck:  1 set of hard reversible jaws o Various T-nuts and bolts o Various distance studs for jaws (to adjust clamping length for material) • Various soft jaws (2 pallets)

Stanje: rabljeno, Leto izdelave: 1989, Collating Machine TMF N1414 - Collating Machine with 14 Stations for A3, 7 Stations for A2 - Includes delivery jogger with online zigzag unit Chodpfeh Uk E Sex Afqjf - Panel operation and controls - Jamming detection - Double-sheet and misfeed (no-sheet) control - Pre-set counter and full receiving tray - Manuals included - Online video inspection available via Skype - We would be pleased to welcome your visit – more machines in stock - Available immediately – can be inspected - Located in Emskirchen / Nuremberg – available for testing

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Diverter Belts: Cedpsh Eibajfx Afqehf For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), Ronde aanvoer voor stapels, eerste vouwunit TD78/4-1 met 4 stations, tweede unit TD66/4-2 met 4 stations, derde unit met mesvouw: Stahl EF63 (1984), SBP 80 persafleg, geen pomp - machine werkte op interne persluchtaansluiting. Chjdpfx Afod Tnxlsqof

Leto izdelave: 2022, Stanje: novo, Aluminum angle conveyor belt with substructure Conveyor belt length: 1000 mm horizontal + 2400 mm inclined Chedpfx Afeht U Tdeqef Incline angle at bend: 45° Discharge height: approx. 2000 mm Height at horizontal section: 300 mm top edge PPU conveyor belt FDA food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width: 400 mm T20 cleats welded - pitch 202 mm * Antistatic due to filaments in the running side fabric Endless finger-spliced with stepped finger joint 30 mm high corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Cross arrangement: -70/+35/-5/+190/-5/+30/-70 mm Full-surface support plate Drive: Motor approx. 0.25 kW Belt speed approx. 0.3 m/sec Connection: 220/400 V, 50 Hz, protection class IP54 Our core competence is delivering precisely what the customer really needs. We collaborate with our customers to develop tailor-made, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grid magnets, metal separator, block magnet, filtration systems.

Stanje: rabljeno,

Leto izdelave: 1988, Stanje: rabljeno,

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen),

Stanje: rabljeno, Leto izdelave: 2016, Perfect binder Rigo Lamibind 340 HM, used The Rigo Lamibind 340 HM is a compact and efficient perfect binder designed for small to medium print runs. This pre-owned machine offers a range of features for professional bookbinding operations. Key Features: - Equipped with milling unit for precise spine preparation - Active side gluing for reliable binding - Integrated cover station for easy application of book covers - Simple operation via touchscreen interface - Suitable for digital and offset papers - Hotmelt (EVA) glue system - Cover feed: manual - Book removal: manual - Performance: Suitable for small to medium runs Technical Details: - Maximum block length: 340 mm Cedpfx Afevax Arjqohf - Maximum block thickness: 40 mm - Milling: Fixed HM disc – 0.5 mm All-Inclusive Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a tailored leasing offer. Sustainable and Cost-Effective Choose a used machine and enjoy double the benefits: conserve resources and reduce your expenses. Despite possible signs of wear, you receive a quality product at an attractive price.