Krožna žaga iz aluminija

Wahlen WK2

Leto izdelave: 2021, Stanje: novo, Enoglava rezalna žaga OMC RONDA 700, nova Stroj na zalogi - žagin list premera 700 mm Njdpfx Aohrukijdyowb - hidro-pnevmatsko podajanje - pnevmatski nagib na obe strani, s fiksnimi kotnimi nastavitvami 22,5° - 45° - 90°. Za vmesne kote z ročnim mehanskim omejilcem - 2 navpična in 2 vodoravna prijemala - sistem mazanja lista s pršilno meglico - popolna pnevmatska zaščita

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Our machine is constructed as a monoblock body, welded from ST42 quality material. Nwsdpfsfv H Dkex Adyob The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. (Documentation available in English only)

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno), Saw blade diameter: 350 Nedpfx Adeff Snbjyjwb

Stanje: novo, 40 MP je enoglavna žaga, ki reže od zgoraj, s premerom žaginega lista 400 mm. Primerljiva z Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom ipd. Žagarsko mizo se lahko ročno nastavi pod kotom +/- 45°. Nagib žagine glave se lahko ročno nastavi od 0° do 45° navzven. Enoglavna žaga 40MP je opremljena z vodoravnimi vpenjalnimi cilindri za pravilno vpenjanje profila, minimalnim mazalnim sistemom in mehansko zaščito žaginega področja. Oglejte si tudi naše rabljene skladiščne stroje znamk Emmegi, Elumatec, Pressta Eisele ipd. Nwsdpfx Aderfapaeyob

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend. Nwedpfjfxyhfsx Adysb

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Nwodpfx Adsd Szf Noyjb Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: novo, Sheet thickness: 1.6 mm Nwsdpfxsftd Uas Adysb Pressing force: 4 t Blade length: 156 mm Adjustable angle: fixed, from – to degrees Table area: 450 mm x 305 mm Total power requirement: manual operation (kW) Machine weight: approx. 95 kg Dimensions (LxWxH): 530 x 380 x 480 mm

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left & right: 20° – 90° - Spindle speed: 4,500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per work cycle: 10 l - Pneumatic profile clamping Nodpfx Adjf E Higsyewb - Table base frame - Space requirement: approx. W 1,100 x H 1,300 x D 700 mm - Weight: approx. 200 kg

Leto izdelave: 2025, Stanje: novo, Nova enoglava žaga z dvigajočim rezilom Ø 300 mm in ročnim pozicioniranjem vertikalne osi FOM INDUSTRIE PANDA 300 ECHO - Rezilo iz volframovega karbida Ø 300 mm - Hidropnevmatski pomik rezila - Sistem za mazanje rezila z meglenjem - Komplet zaščit za območje rezanja - Dva vertikalna primeža Nwedpfxjf Nwxwe Adyob - Dva horizontalna primeža - Pripravljeno za odsesavanje ostružkov in hlapov

Stanje: novo, Tubend aluminium circular saw / under-table saw AC 550 Special equipment included in the price: - Pneumatic vertical and horizontal clamping via 4 clamping jaws - Infinitely variable saw blade feed - Minimum quantity lubrication system - 3m roller conveyor Njdpfskckx Uex Adyowb Description: Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting capacity at 90° (rectangular): 260 x 200 mm Cutting capacity at 90° (square): 155 x 155 mm Cutting capacity at 45° (rectangular): 180 x 200 mm Cutting capacity at 45° (square): 130 x 130 mm Operating pressure: 6 – 8 bar Operating voltage: 380 V Total power requirement: 3 kW Machine weight: approx. 250 kg