Stroj za rezkanje

WAGNER FCU-1100

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The HURON NU-4 is equipped with various buttons, switches, and levers to control its operation. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm Iiederiulgspfx Ah Aok spindle head - swivelling: 360° spindle taper: SK 40 spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 HP machine weight approx.: 3.1 t machine dimensions approx.: 2.36 x 1.65 x 1.45 m (W x H x D)

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), Vertical Turning Machine Center Dörries Scharmann Type VCE 2000/160 Pallet size: 1,600 mm Pallet load: max. 8,000 kg Number of pallets: 13 pcs Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm each Feed rate X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. turning diameter: 2,000 mm Max. workpiece height: 1,500 mm Main Spindle Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm Tool magazine for turning: 59 stations – system 240.2 Iisdpfx Aoguk S Ssh Ask Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1,500 rpm Tool magazine for SK50: 61 stations CNC Control: Siemens Sinumerik 880M Accessories FMS: 13 pallets Rotary loading stations: 2 pcs Coolant unit with filtration system Through-spindle coolant Machine weight: Approx. 40 t Year of manufacture: 1993 (See also further offers from this seller)

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram Isdpfx Ahortd Uwj Asik - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 250 mm, teža obdelovanca (maks.): 750 kg, dolžina brušenja: 2.000 mm, premer brusilnega koluta: 500 mm, skupna širina: 2.000 mm, skupna dolžina: 6.000 mm, skupna višina: 2.000 mm, premer brušenja: 320.400.500 mm, hod vretena: 50 mm, teža obdelovanca med konicami: 500 g, razdalja med središči: 2.200 mm, premer obdelovanca med konicama: 500 mm, največja hitrost vretena: 560 obr/min, hitrost vretena (min.): 1 obr/min, dolžina podajanja os Z: 2.500 mm, hitrost vretena za brušenje: 1.400 obr/min, skupna masa: 8.000 kg, trajanje garancije: 24 meseci, največja hitrost vretena obdelovanca: 560 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Technical Main Data: Iedpfepy A Iujx Ah Ajik Swing diameter: mm 320, 400, 500 Distance between centers: mm 1000, 1500, 2000, 3000 Maximum workpiece weight between centers: kg 500 Maximum workpiece weight between centers (cantilevered, incl. standard grinding wheel): mm 500 (600 mm optional) Peripheral speed: m/sec 45 Workpiece spindle taper, in tailstock quill: Morse 5 Infinitely variable spindle speed control: rpm 1–560 Minimum programmable increment - in X axis (related to diameter): mm 0.001 - in Z axis: mm 0.005 Table swiveling range: ° +6 / –4 Grinding wheel head swiveling range: ° ±30 Workpiece headstock swiveling range: ° 90 Grinding spindle drive motor: kW 11 Workpiece headstock drive motor: kW 2.5 Total motor power: kW 15 Pneumatic supply: kPa 0.6 Machine weight: kg approx. 8000

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp Isdpfsk Egrpex Ah Aeik - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: dober (rabljeno), Robot Proizvajalec: Staeubli Tip: RX170 101225ä Ijdpfx Asbrhtdoh Aoik

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.250 mm, In good technical condition. Year of modernization: 2005. Main motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including switch cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Occupied floor space: 50 square meters Required installation height: 5800 mm Maximum workpiece weight: 12,000 kg Spindle diameter: 130 mm Spindle taper: ISO 50 Spindle traverse: 800 mm Spindle speed range: 5 to 1800 rpm Distance from spindle axis to table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm Ijdpfxswc Sm Is Ah Asik

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Finger jointing line for wood GOMA FC-10 KZ6 Polish production Year of manufacture: 2002 Technical documentation with declaration of conformity TECHNICAL PARAMETERS: - Wood width min/max: 40 / 160 mm - Wood thickness min/max: 25 / 80 mm - Single glued section length: 6000 mm - Clamping force: 7500 kg / 100 atm SAW - Saw blade diameter: 300 mm - Motor power: 6 kW - Cutter (milling unit) power: 15 kW PRESS - Hydraulic pump power: 4 kW - Working pressure: 100 bar Iiedjt Sfz Iepfx Ah Ask

Leto izdelave: 2014, Stanje: dober (rabljeno),

Stanje: rabljeno, številka stroja/vozila: 242350148, A Flott TB23L bench drill is being offered here. The bench drill is mounted on a special lift table (not the original lift table). Iodpolf Evcjfx Ah Asik Technical specifications: - 6-step speed adjustment (manual via pulley) - MK2 taper fitting