Hladilni dostavnik
VW CRAFTER 35 2,0 TDI Kühlkoffer 2,60 m*THERMOKING

Fiksna cena plus DDV

11.850 €

Leto izdelave

2014

Stanje

Rabljeno

Lokacija

Riederich

Hladilni dostavnik VW CRAFTER 35 2,0 TDI Kühlkoffer 2,60 m*THERMOKING

VW CRAFTER 35 2,0 TDI Kühlkoffer 2,60 m*THERMOKING

Osnovni podatki

Oznaka stroja:: Hladilni dostavnik

Proizvajalec:: VW

Model:: CRAFTER 35 2,0 TDI Kühlkoffer 2,60 m*THERMOKING

Leto izdelave:: 2014

Stanje:: rabljeno

Cena in lokacija

Fiksna cena plus DDV

11.850 €

Lokacija prodajalca:: Siemensstr. 6 - 10, 72585 Riederich, Nemčija

Pokliči

Tehnične podrobnosti

Dimenzije in teža

Skupna masa:

3.500 kg

Prostornina tovornega prostora:

9 m³

Dolžina tovornega prostora:

2.575 mm

Širina tovornega prostora:

1.886 mm

Višina nakladalnega prostora:

1.917 mm

Motor in menjalnik

Vrsta goriva:

dizel

Vrsta prenosa:

mehanski

Oprema

Centralno zaklepanje

Varnostne funkcije

ABS

Dokumentacija in certifikacija

Emisijski razred:

Euro 5

Dodatne podrobnosti

Prevoženi kilometri:

374.811 km

Moč:

120 kW (163,15 KM)

Prva registracija:

10/2014

Barva:

bela

Število sedežev:

Podrobnosti ponudbe

ID oglasa:: A18652851

Referenčna številka:: 4213

Posodobitev:: nazadnje dne 29.07.2026

Opis

* CRAFTER 35 2.0 TDI with Kress refrigerated box 2.60 m, with double-wing rear doors
* THERMOKING V 300 MAX refrigeration unit, for both driving and stationary operation, 380 V electric

* Vehicle No. for customer inquiries: 4213

* Environmental badge (green)
* Euro 5 engine variant
* Central locking with remote control
* Two-seater
* Electric windows (double)
Dodpev Hizxefx Anujcn
* Manual gearbox
* Full service history
* 2/3-doors

No liability for typing or printing errors.
Sales exclusively to commercial buyers.
Subject to change, prior sale and errors reserved. Changes, interim sale and errors expressly reserved. This description serves for vehicle identification only and does not constitute a warranty in the legal sense of the purchase law. Only the description as defined in the purchase contract is binding.
* TOP SERVICE + QUALITY
* We will gladly provide you with a LEASING-FINANCING-INSTALLMENT PAYMENT offer
* Warranty insurance available on request from the insurer
* TÜV, UVV tail lift inspection, tachograph test, and installation of OBU unit can be arranged locally by our partners
* Export license plate valid for 30 days
* All export customs documentation possible, but must be requested individually
* Toll registration for Toll-Collect possible at our location
* Free transfer from Stuttgart airport or Metzingen (Württ) train station

* ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT.

* FOR ENGLISH * Andreas Pittas * Thomas Pittas
* Alexander Pittas * Robin Pittas
WHATSAPP number * *
---- Visit us on our website
* Always over 200 vehicles in stock

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2001

226 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 7123 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za valjanje ploščatih navojev EWM GW62

Wiefelstede

932 km

Stroj za valjanje ploščatih navojev
EWMGW62

4.500 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation Dedpfx Anji Eg Nksuscn - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg

Poglej podrobnosti

Mali oglas

Günzburg

438 km

TISKALNA ZAVORA
TRUMPFTrumaBend V 85 S

Pokliči

Mali oglas

Stroj za brušenje površin - horizontalni ELB-Schliff SWN 8 ND

Malsch

586 km

Stroj za brušenje površin - horizontalni
ELB-SchliffSWN 8 ND

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Dolžina brušenja 800 mm Širina brušenja 375 mm Višina obdelovanca 375 mm Električna magnetna vpenjalna plošča 900 x 300 mm Hitrosti vretena 1500 - 3000 min⁻¹ Pritrdilna površina mize 1550 x 370 mm Vzdolžni hod mize 100 - 1000 mm Maksimalna teža obdelovanca 350 kg Dimenzije brusilnega koluta 300 x 50 mm Skupna potrebna moč 9 kW Teža stroja cca 4,6 t Potreben prostor cca 4,0 x 2,3 x 2,6 m Oprema za mokro brušenje, samodejni navpični pomik. Preklopno za potopno ali ploskovno brušenje. Električna naprava za ravnanje Električna magnetna vpenjalna plošča 900 x 300. Dcsdsunt Iujpfx Anuon

Poglej podrobnosti

Mali oglas

Villagarcía de Arosa

1.924 km

Hladilni kombi
IvecoDAILY 35C13

5.000 €

~~13.500 €~~

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZCFC359300D477672, prevoženi kilometri: 195.243 km, vrsta goriva: dizel, lastna masa: 3.130 kg, največja dovoljena obremenitev: 400 kg, skupna masa: 3.500 kg, velikost pnevmatike: 195/75R16, konfiguracija osi: 4x2, medosna razdalja: 3.450 mm, energetska učinkovitost: B, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 3, Leto izdelave: 2012, FINANCING SUBJECT TO CONDITIONS AND APPROVAL BY THE FINANCIAL INSTITUTION. Djdpfjwpwvhex Anuscn

Poglej podrobnosti

Mali oglas

Szigetszentmiklós

334 km

Brusilnik za orodje
EWAGRS 12

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1984, Glava za brušenje: - moč motorja: 2,2 kW - hitrost vrtenja vretena: 1.000 – 8.000 vrt/min - naklon vretena (os A): -10° do +27° - natančnost nastavitev: 1 minuta - nastavitev višine (os Y): 130 mm - obseg giba (os X): 220 mm - obseg nihajnega giba, brezstopenjsko nastavljivo med nihanjem: 0–30 mm - frekvenca nihanja: 30/60 1/min Djdpevmpabsfx Anuecn Delovna glava: - nastavitev polmera (os Z): 0,01–50 mm - natančnost nastavitev: 0,01 mm - umik drsnika od brusilnega do merilnega položaja: maks. 49 mm - križna miza, površina za vpenjanje: 155 x 205 mm - gib X – Y: vsaka 60 mm - največji kot vrtenja (os B): 260° - napetost napajanja: 380 V - teža: 1200 kg Dodatna oprema/opcije: - spremenljiv brušilni pritisk - projektor, pritrjen v merilnem položaju - 1 omara z dodatno opremo - različne brusilne glave, prirobniki - rezervoar za hladilno tekočino - dokumentacija Na zalogi v našem skladišču.

Poglej podrobnosti

Mali oglas

Stroj za valjanje navojev, stroj za hladno valjanje, stroj za valjanje navojev, profilni valjar, val PEE-WEE UPW 24

Hessisch Lichtenau

682 km

Stroj za valjanje navojev, stroj za hladno valjanje, stroj za valjanje navojev, profilni valjar, val
PEE-WEEUPW 24

23.000 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Dodpfxjuz If Ne Anuocn Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Poglej podrobnosti

Mali oglas

CNC center za struženje in rezkanje Gildemeister GMX 400 linear

Sternenfels

563 km

CNC center za struženje in rezkanje
GildemeisterGMX 400 linear

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power Line Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Dcodpfjwzbq Tjx Anuon Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Lower turret: X-axis: Z-axis: Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Poglej podrobnosti

Mali oglas

Rödermark

625 km

Hitri radialni vrtalnik
DONAUDR 28 Z

Pokliči

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 Dcedpou Et Nbjfx Anujn - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Poglej podrobnosti

Mali oglas

Center CNC za struženje in rezkanje INDEX G 400

Bühl

587 km

Center CNC za struženje in rezkanje
INDEXG 400

Pokliči

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Dsdst U R Hzopfx Anuscn Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine.

Poglej podrobnosti

Mali oglas

Razkopalnik-ravnalnik ARKU RM 3035.4/9 & AH 1000/MSG

Nemčija

650 km

Razkopalnik-ravnalnik
ARKURM 3035.4/9 & AH 1000/MSG

Pokliči

Stanje: rabljeno, Leto izdelave: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Straightening machine weight: 2 t Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Decoiler weight: 1.3 t Dedot Hmk Topfx Anujcn Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Poglej podrobnosti

Oglašujte tukaj