Linija za vrtanje in žaganje

Voortman 1250 x 500 mm drill saw line

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Voortman V808 CNC nosilna linija za obrezovanje – leto 2016 (REF: STK‐1549) Iedpfx Afslff H Eo Tjal Obrezovalni robot | Samodejni vstop in izstop materiala | 1,25 m segmenti | Valjčni podajalnik Kjellberg SmartFocus 300A plazemska enota | Donaldson sistem za odsesavanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: MAX, laserska moč: 6.000 W, trajanje garancije: 12 meseci, Oprema: CE označba, hladilna enota, odsesavanje prahu, Brand new 4th generation laser cutting system SF3015H, designed for high laser powers up to 20KW. Our laser cutter is equipped with a 6KW MAX 5G laser source and features an integrated control cabinet. The laser cutting system comes with an automatic shuttle table, significantly reducing loading times. The machine bed is reinforced for enhanced stability. Equipped with an automatic fume extraction system. Machine control interface is in German. Iaedpfx Aek R T Nmof Tjl HANLI industrial water chiller included. Available for purchase ex-stock Büren, including installation, training, and 1-year warranty. For further questions, please contact us directly!

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Iasdpfehzbipox Af Tol Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: dober (rabljeno), Leto izdelave: 2004, številka stroja/vozila: A II 151768, Offer 25979 - Operating hours: 16,550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/sec - Drive: 400 V / 7.5 kW - Motor speed: 3,000 rpm - Air receiver tank: 250 L - Required space: approx. W 700 x H 1,830 x D 1,050 mm Iaedpfxewrcq Ns Af Tol - Weight: approx. 250 kg

Stanje: zelo dobro (rabljeno), Viessmann Vitoplex 300 low-temperature boiler with 500 kW output, 6 bar, 110°C. Year of manufacture: 2012. Iasdpfx Afovzlkre Tsl

Leto izdelave: 2020, Stanje: zelo dobro (rabljeno), 2 bucket attachments with quick coupler (type DMR) Iaodpfxstu Nmde Af Tel

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Iaodjfibd Tjpfx Af Tel Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Stanje: zelo dobro (rabljeno), Current gauge width approx.: 25.0 m Outreaches: - Fixed support usable (possible)/total (possible) max. approx.: 18.5 (21.5)/22.0 (25.0) m - Pivoting support usable/total max. approx.: 12.5/16.5 m Lifting height under spreader current/possible approx.: 11.3/14.0 m Iedpfx Afod N D U Do Tsal Manufacturer / Rebuild: TAKRAF / TEICHMANN Rebuilt: 2019

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, upogibna sila (maks.): 1.000 t, hod: 200 mm, obratovalna hitrost: 50 mm/s, hitrost vzvratne vožnje: 180 mm/s, skupna masa: 8.000 kg, skupna dolžina: 3.915 mm, skupna širina: 1.605 mm, skupna višina: 2.655 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, trajanje garancije: 24 meseci, Kot upogiba (maks.): 90 °, dolžina mize: 3.200 mm, delovna višina: 450 mm, All-električni servo upogibni stroj Nazivna sila (kN): 1000 Hod drsnika (mm): 200 Globina grla (mm): 360 X-osni pomik (mm): 600 R-osni pomik (mm): 200 Z-osni pomik (mm): 2500 Iodpfx Afjv Hchlj Tsal 🔹 Pametni CNC sistem – SL100-P z naprednimi algoritmi in 12-palčnim zaslonom na dotik za intuitivno upravljanje. 🔹 Visokonatančna konstrukcija – Preračunana s pomočjo metode končnih elementov (FEA), žarjena in enkratno strojno obdelana za dolgoročno stabilnost in natančnost. 🔹 4-osni inteligentni odrivnik materiala (backgauge) – Pogon z AC servomotorji, hitra pozicioniranja z avtomatskim preprečevanjem trkov. 🔹 Sistem za kompenzacijo natančnosti – Nastavljive konveksne letve in fina nastavitev za optimalno natančnost upogibanja. 🔹 Zmogljiv in vzdržljiv pogon – Visokonavorni servomotor, robustni krogelni vijaki in zaščita za dolgo življenjsko dobo. 🔹 Popolnoma zaprto povratno vodenje – Magnetno merjenje Y1/Y2, natančnost pozicioniranja ±5μm. 🔹 Optimiziran električni sistem – Zaprt električni omarica, učinkovito odvajanje toplote in urejena napeljava za zanesljivost in enostavno vzdrževanje. 🔹 Uvožene precizne komponente – Krogelni vijaki in linearna vodila zagotavljajo natančnost brez kompenzacije hoda. 🔹 Visoka natančnost, stabilnost in pametna avtomatizacija – zasnovano za profesionalno upogibanje pločevine!

Stanje: novo, – Semi-automatic – Hydraulic Iaodsvkkl Topfx Af Tel – Infinitely variable bandsaw speed adjustment – Double mitre – Hydraulic clamping of the mitre setting – Saw feed pressure hydraulically adjustable – Fully hydraulic material clamping – Hydraulically adjustable clamping pressure – Coolant system – Automatic shut-off – Automatic machine shut-off in case of: open cover, broken blade, insufficient blade tension – Emergency stop – Documentation – 400V