Korozijska preskusna omara za slano pršenje

VLM CC 1000-FL HL V.745.672.120

Stanje: novo, Leto izdelave: 2025, Spray-Flood Cleaning System – Parts Cleaning Machine Washing (600 liters) + Rinsing (430 liters); electrically heated; The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, oscillate, or rotate during the cleaning cycle (freely selectable via the program). Drying via hot air and vacuum drying. Basket usable dimensions (LxWxH): 600 x 400 x 300 mm Maximum load weight: 150 kg Loading table in front of the machine included Lhodpfx Ashu Sg Iehzsp Control: Siemens S7-1200 with 20 programs

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, 2 vacuum drying ovens, GMP-compliant, by Vötsch Industrietechnik (also available for individual sale). Product-contact material is stainless steel 1.4435. Heating type: externally heated hollow plates; the ceiling is also heated, double-walled with internal serpentine flow guides, pressure-tight up to 3 bar. Heating is provided via a heating/cooling circuit (indirect heating with hot water) using a separate hot water thermostat. Operating temperature: max. 95°C, internal vessel operating pressure: 0 to 1 bar abs. External dimensions: 1,485 mm width (housing), 2,000 mm height (housing), 1,700 mm depth. Lhodjucdqnepfx Ahzjp Trays: 1,200 mm width x 950 mm depth. Number of trays: 13 units. Usable area: 14.8 m². Weight: approx. 2,900 kg per dryer. Connections: hot water connection (supply and return), vacuum connection. Heating of the vacuum drying ovens via heating medium, e.g. water, with connections at the rear. Heating medium heated by a temperature control unit Type 95-36-E, rated voltage 400 V 3/N PE AC, 50 Hz, device heating capacity 36 kW, heating capacity can be reduced to 18 kW within a specified temperature range.

Stanje: novo, Leto izdelave: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin, manufactured in 2018. The system is still in its original packaging and available from our warehouse. You are welcome to arrange a viewing appointment on site after prior telephone consultation. Lodjl D Ex Dspfx Ahzehp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohol. Degreasing of metal components contaminated with oil and chips from mechanical processing. Usable solvents: modified alcohols Hydrocarbons class AIII (flash point > 55° C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Oiling for corrosion protection (spraying) Cartridge filter Very good condition (the system has been used very little) 6 months warranty From Metalclean AG service System process: spraying, immersion, ultrasonic cleaning, vapor degreasing including vacuum drying. Data: Basket dimensions: 480 x 320 x 200 h mm Maximum loading weight: 50 kg Average batches per hour: up to 5 Lhodpshg Ugiefx Ahzjp System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Electrical power requirement: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Materials Testing Machine: ZwickRoell GmbH model Z005TN Designed for conducting standard tests on materials and components. It enables precise measurement of tensile strength, flexibility, and other material properties, which are essential in engineering and materials research. Thanks to advanced technology and user-friendly software, these machines provide efficient and safe operation. The device includes accessories for the measurement of tensile, compression, and bending properties of materials. Technical specifications: • Year of manufacture: 2010 • Maximum load (Fmax): 5 kN • Test dimensions: - Height (without accessories): 1070 mm - Stroke height: 1000 mm • Frame dimensions: - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm • Weight: approx. 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption approx. 800 VA The machine enables testing of various materials and components, including: • Construction materials: concrete, steel, wood. Lhsdpfx Ahjuna Iuozop • Plastics: flexibility, tensile strength testing. • Metals: strength, hardness, and fatigue testing. • Mechanical components: compression, bending, and tensile tests. • Samples in various shapes: thin layers, blocks, tubes. Thanks to the system’s flexibility, tests can be tailored to specific requirements. TAGS: Laboratory Equipment, Materials Testing, EPS Polystyrene, Polystyrene Production, Mechanical Testing, Thermal Conductivity, Material Properties, Building Materials, Quality Control, Engineering Research

Leto izdelave: 2005, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.600 kg, največja dovoljena obremenitev: 1.000 kg, notranja višina: 1.200 mm, notranja dolžina: 1.390 mm, notranja širina: 1.390 mm, nazivna moč: 64.000 kW (87.015,68 KM), zmogljivost črpalke: 500 l/min, tlak črpalke: 450.000 letvica, kapaciteta rezervoarja za vodo: 800 l, številka stroja/vozila: 25191, Industrial machine and parts cleaning device. Equipped with 3 washing chambers: one main and two auxiliary. Technical condition: Excellent – used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main machine components: Lodpfxjrkz Stj Ahzjhp - Washing chamber door (with actuators) - Upper washing nozzle - Lower washing nozzle - High-pressure piping - Control cabinet - Main washing pump - Auxiliary pump 1 - Auxiliary pump 2 - Water heater (for each chamber) - Drain valve - Water level sensor - Parts washing basket - Oil separator - Steam vent - Water pressure indicators - Automatic water filling and chemical dosing system Additionally, the set includes a reverse osmosis water filter.

Stanje: rabljeno, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Travels (X, Y, Z): 320 x 220 x 180 [mm] - Table traverse speed: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] - Tank capacity: 260 [l] Lhodpfsuhcbcsx Ahzsp - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control - Cooling unit - Lubrication tank with pump - Automatic wire threading

Leto izdelave: 2006, Stanje: rabljeno, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment System Manufacturer: Sirio-Wire Lsdpfef Nku Rsx Ahzjhp Model: M0209 Number of wires/strands: 12 (6+6) Wire diameter: 1.0 – 5.5 mm; however, even thicker wires have been processed on the system with very satisfactory cleaning results. Year of manufacture: 2006 The system was operated for only around three years before production was relocated to another site. Process: Ultrasonic and electrolytic cleaning in hot bath A detailed description of the process can be found on the manufacturer’s website (siriowire) under 'Ultrasonic and Electrolytic Cleaning.' The system is in good, operational condition and is complete except for the pumps. In the photos, the operator catwalk and the collection tray that the system sits in are missing; these photos will be added shortly. The last three images show systems of this type in operation.

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Lhedpfx Aefk Ailehzop Table width: 1480 mm Table length: 2980 mm Weight approx.: 630 kg Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for the efficient production of assembly, welding, and adhesive constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalog section: welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small to medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick working surface equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, in deviation from the standard. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of wear. This design makes the table system especially durable and sustainable in use. Price must be reconfirmed with manufacturer before ordering!!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Helium leak detector Manufacturer: Leybold Model: Phoenix Quadro EU Condition: As new, ready for use, unused from 2022 Connection: 230V Lhsdpfx Ahst Urlrozep Delivery time: ex stock (subject to prior sale)