Stroj za neprekinjeno vrtanje

Vitap Sigma 2TAS

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Prehodna vrtalna masina Vitap Sigma 2TAS Iaodpfx Absy Idd Noxou 4 navpične vrtalne skupine, vsaka z dvema glavama 2 stranska čelna vretena Razdalja vreten: 32mm Maksimalna dolžina obdelovanca: 2500mm, minimalna: 240mm Globina vrtanja do 70mm Pnevmatsko vpenjanje materiala Leto proizvodnje: 2006 CE znak Teža stroja: 1600kg Dimenzije: 390x180x145cm (V)

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Isdsh Ryhnepfx Abxeau Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 0,004 kW (0,01 KM), največja višina reza: 250 mm, največja širina rezanja: 450 mm, premer žaginega lista: 400 mm, skupna masa: 7.500 kg, Double Arbor Multi-Blade Saw 2x110 kW TOS SVITAVY PWR 422 – Czech production – double arbor – full technical documentation (DTR) TECHNICAL DATA: – Maximum cutting height: 250 mm – Track width: 450 mm – Arbor width: 450 mm – Blade bore diameter: 80 mm – Arbor diameter: 60 mm – Minimum blade diameter: 300 mm – Maximum blade diameter: 400 mm – Maximum input material width: 860 mm – Minimum processed material length: 1500 mm Iedpsri Nvvsfx Abxjau * From above: – Kickback devices: yes – Pneumatically pressed metal feed roller: yes – Kickback devices: yes – Pneumatically pressed metal feed roller: yes – Pressure unit: yes – Saw arbor: yes – Pressure unit: yes – Two pneumatically pressed metal feed rollers: yes * From below: – Metal idle roller: yes – Guide: yes – Kickback devices: yes – Track: yes – Saw arbor: yes – Track: yes – Infinitely variable feed speed with inverter: 4–40 m/min – Main motors: 2x110 kW – Feed motor: approx. 3 kW – Electric elevation of the frame (up/down): 0.55 kW – Electric adjustment of saw arbors: 2x0.18 kW – Central lubrication system – Extraction port diameter: 2x300 mm – Dimensions (LxWxH): 3400x2650x2200 mm – Approximate weight: 7500 kg

Stanje: dober (rabljeno), Leto izdelave: 2005,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Basic Information Manufacturer TOS SVITAVY Model PKSN 32 B Category Multi-blade Saws Shipping Delivery To be agreed Semesters Technical Specifications Maximum working width: 400 mm Machine with simultaneous transport and processing of the workpiece CE certified machine Used machine Minimum working length: 330 mm Motor power: 55 kW Supply voltage: 380-400 V Safety features Completely refurbished Isdpfshixkhjx Abxoau Electrically controlled adjustments Fully operational Excellent condition Spindle diameter: 70 mm Single tool spindle Equipped with noise reduction enclosure Cast iron body Feed speed: 36 m/min Spindle lock Maximum cutting height: 160 mm New electrical system New mechanical components New pneumatics New appearance Noise level: 70 dB Right and left rotation Automatic adjustment Very good condition Cutting width: 400 mm Machine width: 1800 mm Working width Saw blade diameter: 400 mm Machine weight: 3500 kg Machine dimensions: 1600 x 1800 x 2500 mm Cutting height Processing height: 160 mm Infinitely variable feed speed With in-machine workpiece transport

Stanje: novo, Leto izdelave: 2026, The PS12E-2000 panel saw is a professional woodworking tool distinguished by its versatility and advanced features. This circular saw is designed for a wide range of wood processing tasks, offering precise cuts of narrow and thin boards as well as handling thick wooden panels up to a maximum thickness of 100 mm. Key features of the PS12E-2000 sliding table panel saw: • Dual saw blades: The saw is equipped with two blades – main and scoring – for versatile cutting of various types of wood materials. • Scoring unit for MDF boards: An additional scoring blade is installed on the machine, enabling precise cutting of MDF boards and other wood-based panels with similar structure. • Blade height adjustment: Smooth adjustment of the main saw blade up to 100 mm allows adaptation to various material thicknesses. • Blade tilting: The main blade can be tilted from 90° to 45°. • Heavy-duty guides: The machine is fitted with robust guides with scales, both longitudinal (steel) and angular. • Additional sliding table: A large, ball-bearing sliding table with a support rail is one of the primary advantages of this saw. It enables processing of oversized panels and large workpieces. • Chip extraction system: The machine is equipped with a chip extraction pipe system, ensuring cleanliness in the workplace. • Easy blade change: The blade replacement process is quick and efficient for high productivity. Ijdjvuf Tmopfx Abxsau • Rip fence with scale: Fitted with a rip fence with an accurate scale for repeatable lengthwise cuts. • Blade guard: The saw comes with a blade guard, which can be connected to an extraction system for added safety and increased workshop cleanliness. Technical specifications: Sliding table length [mm]: 2000 Cutting width, right side [mm]: 1260 Blade tilt [°]: 45 Max cutting height at 45° [mm]: 80 Max cutting height with 315 blade at 90° [mm]: 100 Max cutting height with 300 blade at 90° [mm]: 95 Maximum blade size [mm]: 315 x 30 Maximum scoring blade [mm]: 100 x 20 Main blade speed [rpm]: 4500 Scoring blade speed [rpm]: 5800 Motor power S1/S6: 3.8 kW / 6.1 HP Power supply: 3-phase, 400V Weight [kg]: 275 Warranty [months]: 12

Stanje: rabljeno, Leto izdelave: 2026, Special Price - Exhibition Machine Garbsen Our machine concept WL 6: The WEIMA high-performance shredder, with its flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper, which can be loaded via conveyor belt or manually. This hopper can be customized to individual requirements and guarantees continuous and cost-effective material feeding without manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor’s cutting area, with automatic, load-dependent regulation. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted with gimbal suspension to prevent lateral forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are seated in milled knife pockets on special knife holders. This patented system guarantees, for the first time, a reduced cutting gap between counter-knife and rotor, resulting in high throughput, low energy consumption, and optimal discharge of the shredded material. The screen beneath the rotor determines the chip size (10–100 mm). Optionally, a hydraulically opening screen basket is available. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox, mounted on one side of the rotor shaft. Isdpfx Aoy D E Tdobxeau Precise cutting at high throughput with profiled V-rotor: The V-rotor, specially developed by WEIMA, is universally applicable and made from solid material. Its aggressive material intake, with up to two knife rows, ensures high throughput with low power requirement. It can be equipped with hardened cutting knives (edge lengths 30 mm and 40 mm), which are multiple reversible when worn, drastically reducing maintenance costs. Intuitive operation via Siemens PLC control with touch display: To ensure optimal coordination of electronics and machine, we design, build, and wire our own control cabinets, exclusively using premium components (e.g., Siemens or Rittal). Intuitively operable touch surfaces ensure fast adjustments. Features such as adjusting the pusher stroke or stop ensure high throughput. Built-in overload protection also prevents machine damage. Technical Features WL 6 - Feed opening: 800 x 1,250 mm - Hopper volume: 0.9 m³ - Rotor length: 800 mm - Rotor diameter: 256 mm - Drive power: 22 kW - Rotor speed: 90 rpm - Max. number of knives: 42 pcs - Knife type and size: concave / 40 x 40 mm, reversible cutting crowns - Screen perforation: 10–60 mm - Paint finish: WEIMA standard RAL 2022 / 7016 - Electrical connection: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg - Including: Control cabinet (Rittal) with electrical control (Moeller/Siemens) and S

Stanje: novo, Leto izdelave: 2026, The PS12E-3000 panel saw is a professional woodworking tool that stands out for its powerful specifications and capability to perform precision cuts on a large scale. This advanced circular saw is designed for a wide range of woodworking tasks and is the perfect tool for demanding users. Key features of the PS12E-3000 panel saw for wood: Iaedpfx Ajvugc Ajbxeu Two saw blades: The machine is equipped with two saw blades – a main and a scoring blade – providing great cutting versatility for various types of wood-based materials. Large sliding table: One of the main advantages of this model is its exceptionally long, ball-bearing sliding table with support, allowing for precise machining of large-format particle boards up to almost 3000 mm long and other large panel materials. Additional scoring blade: The supplementary scoring blade makes this saw ideal for cutting furniture boards and particle boards, eliminating the risk of chipping and ensuring a clean edge. Tilting blade: The main saw blade can be tilted from 90° to 45°. Maximum guide length: This saw features an impressive 2300 mm guide length for versatile workpiece positioning. Blade change: Blade replacement is quick and efficient thanks to the removable metal table top and easy blade removal system. Saw guard: The machine is equipped with an efficient blade guard that can be connected to an extraction system, helping to keep the workspace clean. Powerful motor: Both blades are driven by a robust 3.8 kW, 400V motor that guarantees smooth operation and effective cutting performance. Control panel: The control panel is located on the lower part of the saw and includes an emergency stop, an angle adjustment knob (45°), and a blade height adjustment knob with lock. Additional measurement devices: All guides come with length and angle scales, enabling quick setting of the required angle and length without needing extra measurements. Dust extraction compatibility: The saw is designed for connection to a dust and chip extraction system with a 100 mm suction port, contributing to workplace cleanliness. Application of the PS12E-3000 panel saw: The PS12E-3000 panel saw is an advanced machine that combines durability, precision, and efficiency, making it an ideal choice for professional carpenters and woodworkers. Its versatile features and advanced functions allow for the execution of various woodworking projects and tasks, both in industrial and craft environments. SLIDING TABLE DIMENSIONS 3000 x 270 mm MAIN TABLE DIMENSIONS 800 x 385 mm AUXILIARY SIDE TABLE DIMENSIONS 880 x 800 mm CUTTING WIDTH 1220 mm BLADE TILT 0-45° CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW BLADE DIAMETER 315 mm MAXIMUM SCORING BLADE DIAMETER 100 mm MAIN SAW SPEED 4000 rpm SCORING BLADE SPEED 5800 rpm MOTOR POWER S6 5.3 kW / 7.1 HP MOTOR POWER S1 3.8 kW / 5.1 HP POWER SUPPLY 400 V WEIGHT 309 kg

Stanje: rabljeno, Plate turning device for loading and unloading panels. Working dimensions: Ijdpferzhfajx Abxeau * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Rotation direction: from longitudinal to transverse. This device is commonly used in the woodworking and furniture industries to facilitate the handling of panels during processing. If you have any further questions or require additional information, please do not hesitate to contact us!

Stanje: rabljeno, Plate turning device for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Rotation direction: from crosswise to lengthwise. This device is commonly used in the woodworking and furniture industry to facilitate the movement of panels during processing. If you have any further questions or require additional information, please do not hesitate to contact us! Iaedpfx Abjrzhfdsxju