Stroj za robne trakove

Vitap Quartz 6.7

Description:

Solid steel construction for high machine stability. Workpieces are conveyed on a smooth-running transport chain with plastic plates. The top pressure unit is equipped with two rows of rubber-coated rollers. Manual adjustment of the top pressure, with automatic positioning of the processing units according to the changed workpiece thickness. Mechanical digital display for panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3mm edging material. Support plate for edging rolls with a diameter of up to 800 mm. Central extraction system. Roller track as workpiece support along the entire machine length. Protective hood over all processing units. Control panel, including emergency stop button and lockable main switch. Transformer for 24V auxiliary circuit.

Pre-milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable stopper at the infeed. Maximum material removal: 2 mm. 2 motors, each 1.1 kW, 12,000 rpm, maximum material removal 2 mm, extraction diameter 120 mm, incl. 2 WIDIA cutting tools.

Gluing section for hot-melt adhesive with rapid heating and glue application roller. System for temperature control and recycling of excess hot-melt adhesive. Power consumption: 3.5 kW, capacity: 1.5 kg, heat-up time: approx. 15 min, depending on ambient temperature and adhesive.

End trimming unit
With 1 saw blade for trimming the front and rear overhanging edges at a 90° angle, flush with the workpiece. Trimming of the front and rear overhangs is individually controllable as required.
Motor: 0.35 kW
Saw blade speed: 12,000 rpm.

Flush trimming unit
With 2 motors for milling radii or chamfers at the top, bottom, and/or front edge. Vertical and horizontal adjustment of the motors on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motors not tiltable. Unit complete with WIDIA cutting tools 2/3 mm.
2 motors, each 0.55 kW, 12,000 rpm.
Diamond cutting tools, 68 mm Z6, R=2.

Profile scraping unit
Flat scraping blade
Buffing unit

Form trimming unit
With 0.22 kW, 12,000 rpm, prismatic linear guide.
Max. panel thickness: 50 mm
Max. edge material thickness: 2 mm
Hsdpsxn Hzbsfx Ah Dsfn

Technical data:
Edging strip thickness (for manual feed) max.: 5x45 mm
Pre-milled panel thickness: 10 – 40 mm
Unmilled panel thickness: 10 – 60 mm
Max. height melamine edging: 65 mm
Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm
Max. edge overhang top/bottom: 2 mm each
Minimum workpiece width with roll material: 90 mm
Minimum workpiece length with roll material: 160 mm
Adhesive temperature: 190°–210°C
Feed speed: 8 m/min
Inverter: 200 Hz
Compressed air: 7 bar
Extraction socket diameter: 2x 60 mm
CE standard

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.