Visoko zmogljiv Vecoplan drobilnik

Vecoplan VIZ 1300 L5 ESC

Stanje: novo, številka stroja/vozila: Baureihe GSL 300 / Neumaschine, The granulators of the GSL series 300/400 to 300/800 are primarily designed for size reduction of production scrap in injection molding and blow molding applications. Cedpfxeghgbhe Afnopw In addition to the key advantages of the GSL series, the slow-speed granulators GSL 300/400, GSL 300/600, and GSL 300/800 are particularly suitable for processing large-area components such as automotive door panels, bumpers, or hollow bodies. The "V arrangement" of the rotor blades ensures that the pre-shredded material is held at the center of the rotor. As a result, wear on the grinding chamber walls is significantly reduced when processing glass fiber-reinforced plastics. Material build-up on the chamber side walls is also prevented. Thanks to the staggered arrangement of the rotor discs, only individual knives are engaged at any one time, thereby always providing higher cutting force.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 6.800 h, Funkcionalnost: nepreverjeno, Basic Package AK560: Central axle trailer chassis with 2 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Tyres 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted mudguards) Gross vehicle weight rating 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, compliant with EUROMOT IV emission standard Load-dependent control of material feed incl. automatic scraper floor reversal Fuel tank 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with bolted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and exchangeable flail tips Standard: “Streusel” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g. raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, disengaging travel drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size 30 – 280 mm, gradations upon request) incl. rear flap Scraper floor with 32 slats Complete radio remote control Travel drive preparation Acoustic start-up warning Paintwork: RAL2011 deep orange Optional Equipment: Special paint finish in DB6841 MB-Trac Green Hydraulic travel drive Cpjdexx Rvkjpfx Afnow 600 l fuel tank Fine shredding basket 4 m rear conveyor, belt width 1,800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper side walls Impact plate with wear strip and additional row of teeth Delivery date by arrangement

Stanje: rabljeno, Leto izdelave: 2018, premer rotorja: 368 mm, širina rotorja: 1.500 mm, No. 10027 Single-Shaft Shredder / Shredder AMIS / WEIMA WT 15 Used, year of manufacture 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be inspected and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening: 1500 x 1160 mm (LxW) Rotor width: 1500 mm Rotor diameter: 368 mm Rotor speed: approx. 90 rpm Motor power: 90 kW Throughput: approx. 5 tons per hour (depending on material) Total plant output: 99 kW Current consumption: 210 A Voltage: 400 V / 50 Hz Csdpexwdiuofx Afnspw PLC control: Siemens SIMATIC Built-in screen with hole diameter 20 mm Replacement screen with hole diameter 50 mm The high-performance shredder of the WT series is ideally suited for processing a wide range of plastics – especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams, as well as all loose and non-bulky residual materials. The WING-RAM swing arm ensures reliable feeding even of contaminated or moist material. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of manufacture 2018 / 1.5 kW Incl. AMIS magnetic separator Installation dimensions approx. 9000 x 3500 x 3950 mm (LxWxH) Transport dimensions (single-shaft shredder) approx. 3000 x 2700 x 3200 mm (LxWxH) Weight: approx. 12,500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, transport and assembly Dismantling, transport and loading by us optionally available Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale is as-is Technical data, condition description, year of manufacture and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: rabljeno, številka stroja/vozila: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows of stator knives Cjdek Tuxdepfx Afnopw Infeed cross-section approx. 600 x 660 mm Drive motor: 30 kW

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 4.240 h, Funkcionalnost: popolnoma funkcionalen, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC Directive 50 mm EC towing eye including coupling shoe Tires: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust directed upwards Load-dependent control of material feed including automatic scraper floor reversal Fuel tank: 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - double lock Standard: “Streusel plus” flail tip Centrally positioned slide bars Electric pump for cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold in/out rear belt, release travel drive) when engine is off 24-V electric control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh size between 30 - 280 mm, grade on request), including one-piece rear door Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor 4 m, 1,800 mm wide “classic” Antimagnetic centerpiece on rear discharge conveyor Cpedpoyhckmefx Afnjw Reinforcement plates on feed hopper (Hardox material) on both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Optional Equipment: Hydraulic travel drive Fuel tank 600 l Flail tip C1 “Bear Claw” with carbide Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separated drive for feed roller and scraper floor – "Twin Drive" Duomatic coupling Smooth impact plate Fine-shredding basket Delivery date to be agreed

Stanje: rabljeno, številka stroja/vozila: 12897, Rotor diameter: 800 mm Rotor width: 1600 mm Cpedpowbwwvjfx Afnew Rotor knives: 7 Stator knives: 2 Infeed opening approx. 800 x 1600 mm Drive motor: 160 kW

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, skupna masa: 25.000 kg, Doppstadt DW 3060 Büffel Type C - Year of manufacture: 08/2014 - Operating hours: 7,275 - Engine: Mercedes Benz, 430 HP - AdBlue - Drum: 21 teeth - Overband magnet - Remote control - Hydraulic drive (self-propelled) Csdeygnk Aspfx Afnjpw The machine has been overhauled and is available immediately.

Stanje: rabljeno, Leto izdelave: 2006, No. 10034 2 Units of Stationary Single-Shaft Shredder Doppstadt DW 2560 E1 Stationary Single-Shaft Shredder Doppstadt DW 2560 E1 (1 of 2) Used, year of manufacture 2006 (completely overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.) Approx. 600 operating hours since overhaul Electric motor Approx. 20,000 operating hours Scope of delivery does not include a conveyor belt Including spare gearbox Feed width: 1900 mm / Feed length: 3060 mm Motor: Manufacturer T-T Electric / Type: DC Motor LAK 4250 C / Power: 315 kW / Rated speed: 2000 rpm / Armature voltage: 460 V / Armature current: 721 A / Field voltage: 340 V / Field current: 14.8 A / Protection class: IP 55 / Cooling by 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / Power: 7.5 kW / Rated voltage: 380 V Cutting unit: Roller / Length: 2500 mm / Diameter: 600 mm / Speed: 31 rpm Throughput: Shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25,665 kg Stationary Single-Shaft Shredder Doppstadt DW 2560 E1 (2 of 2) Used, year of manufacture 2006 (completely overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.), fire damage December 2025 (roller condition good, gearbox condition good, motor condition unclear, control unit burnt, hydraulic unit burnt) Approx. 200 operating hours since overhaul Electric motor Approx. 23,000 operating hours Scope of delivery includes a conveyor belt Machine was used for bulky waste and wood Feed width: 1900 mm / Feed length: 3060 mm Motor: Manufacturer T-T Electric / Type: DC Motor LAK 4250 C / Power: 315 kW / Rated speed: 2000 rpm / Armature voltage: 460 V / Armature current: 721 A / Field voltage: 340 V / Field current: 14.8 A / Protection class: IP 55 / Cooling by 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / Power: 7.5 kW / Rated voltage: 380 V Cutting unit: Roller / Length: 2500 mm / Diameter: 600 mm / Speed: 31 rpm Throughput: Shredded material up to 40 t/h Longitudinal conveyor: Length: 7800 mm / Width: 1000 mm / Discharge height: 1680 mm / Speed: 1.8 m/s Cpjdpfx Afeym Edtenjw Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25,665 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport, and assembly Subject to errors in description and price Dismantling, transport, and loading can optionally be provided by us To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale in as-is condition Technical data, description of condition, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, no guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as inspected” Pictures and videos are for reference and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, obratovalne ure: 7.340 h, Doppstadt DW 3060K Büffel - Leto izdelave: 2012 - Delovne ure: 7340 - Motor: Mercedes Benz 430 KM - Valj z 21 zobmi - Gosenice - Daljinsko upravljanje - Teža: 30.000 kg Stroj je obnovljen in takoj na voljo. Codpfx Aoyhyuyjfnspw

Stanje: novo, Rotor diameter: 300 mm Rotor width: 600 mm Rotor blades: 3 x 2 Stator blades: 2 Feed opening approx. 300 x 600 mm Drive motor: 18.5 kW Cpsdewfig Depfx Afnjw