BOEHRINGER VDF 400 CM

VDF Boehringer VDF 400 CM

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 620 mm, pomik po osi Z: 2.000 mm, Premer palice (maks.): 110 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 3, Horizontalni stružnica iz leta 2007. BOEHRINGER VDF 400 CM je opremljena s 500 mm vpenjalno glavo in pogonjenim orodjem za večjo prilagodljivost. Ponuja impresiven pomik po X-osi 620 mm in po Y-osi 2000 mm. Če iščete visokokakovostno stružnico, razmislite o BOEHRINGER VDF 400 CM, ki jo ponujamo v prodajo. Kontaktirajte nas za dodatne informacije. • Premer vpenjalne glave: 500 mm Tehnične specifikacije Pogonjena orodja: Da Proti-vreteno: Ne Pgsdpfx Ajzzp Auonpsu

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled Psdpfx Aouhauyenpegu - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: rabljeno, Leto izdelave: 2007, Turning length: 2,500 mm Control: Sinumerik 840 D Spindle nose: A 11 Number of tools: 48 Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm C-axis: 0.1–30 rpm Quill diameter: 160 mm Internal taper: MK 5 Maximum tool length: 500 mm Maximum tool weight: 15 kg Machine weight: approx. 27 t Space requirements: approx. 8.4 x 4.0 x 2.5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle nose as per DIN 55026: A 11 Bar capacity: 123 mm Front bearing diameter: 200 mm Oriented spindle stop: 0–359 degrees Drive power at 100/60% duty cycle: 37/45 kW Total speed range: 10–2,500 rpm Number of speed ranges: 2 Podpfx Aowwaruonpsgu Speed range I: 10–775 rpm Speed range II: 20–2,500 rpm Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm)

Stanje: dober (rabljeno), Leto izdelave: 2001, Stroj je v dobrem stanju. Deli, ki so prikazani ročno, niso vključeni. Rezalna orodja niso priložena. Pjdpsrpk Rmjfx Anpjgu

Stanje: zelo dobro (rabljeno), For sale: Polish-made underfloor wheel lathe by Rafamet. The machine is fully operational and in good condition, recently modernized with upgraded electrics and controls by Rafamet. The machine was in use until recently, currently disassembled and ready for loading. Technical specifications: - Track gauge (standard): 1,435 mm - Track gauge (special): 1,524 or 1,676 mm - Wheel diameter: 800–1,500 mm - Minimum distance between wheelset axles: 1,500 mm - Maximum axle clamping force on rails: 25 tons - Driving roller speed (stepless): 15–82 rpm - Peripheral speed of driving rollers: 7.5–43 mm/min - Copy slide feed (stepless): 0.95–34 mm/min - External lifter feed: 540 mm/min - Internal lifter feed: 410 mm/min - Slide travel: 2,300 mm/min - Traversing rail feed: 9,000 mm/min - Weight (with standard equipment): 25,200 kg Pgodpfxomidwcj Anpou - Installed power: 83 kW (58 kW after modernization)

Leto izdelave: 2000, stanje: dober (rabljeno), Rezervni deli, prikazani na roki, niso vključeni. Dolžina 1350 mm, premer 480 mm, Pgedpfjpy Eqmox Anpou

Stanje: dober (rabljeno), potovalna razdalja osi X: 12.000 mm, pomik osi Y: 7.300 mm, pomik po osi Z: 3.000 mm, skupna dolžina: 30.000 mm, dolžina mize: 12.000 mm, širina mize: 4.730 mm, skupna širina: 12.000 mm, skupna višina: 10.475 mm, obremenitev mize: 250.000 kg, skupna masa: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Manufacturer: Waldrich - Siegen - Model: PF-F-150(1)-530/400 X-axis: 12,000 mm Y-axis: 7,300 mm Z-axis: 3,000 mm W-axis: 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Traverse-type milling head Vertically adjustable crossbeam Horizontal hydrostatic spindle ram Milling spindle diameter: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angle milling head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2400 rpm Küma fixed head GB1D – 90 kW – 2400 rpm Küma angle head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – coolant through spindle at 20 / 40 bar Machine refurbished in 2004 by Schiess Bed – Table assembly: Renewal of sliding surfaces Regrinding of guideways Renewal of table drive Direct linear measuring system Hydrostatic guideway Gantry and crossbeam: Modification of adjusting spindle Trapezoidal spindle replaced with ball screw Direct linear measuring system New drive motors to increase feed speed of milling axes New milling slide with hydrostatic guideways Electrical System: Completely new control cabinet Completely new wiring Siemens Sinumerik 840D control – 6 axes Equipment: Completely new Raumag-Janich safety covers Completely new double swarf conveyor Large tool package Extensive clamping accessories Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Pjdpfx Asytrxkenpogu Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine casings. Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute any representation or contractual terms. We recommend verifying all critical details.

Stanje: dober (rabljeno), izvrtina vretena: 360 mm, potovalna razdalja osi X: 798 mm, pomik po osi Z: 358 mm, moč vretenovega motorja: 45.000 W, največja hitrost vrtenja: 500 obr/min, skupna višina: 2.100 mm, skupna dolžina: 8.100 mm, skupna širina: 2.750 mm, skupna masa: 13.000 kg, Maks. premer struženja: 665 mm X-os: 798 mm Z-os: 358 mm Vrtina vretena: 360 mm Hitrost vrtenja: 500 obr/min Moč vretena: 45 kW Pgodpfx Anowxb Erjpju Vpenjanje pinole: 6 Mk Hod pinole: 230 mm Premer pinole: 150 mm Dolžina: 8100 mm Širina: 275 mm Višina: 2100 mm Teža: 13.000 kg Prosimo, upoštevajte: Informacije na tej strani so bile zbrane po naših najboljših močeh in, kjer je bilo mogoče, pridobljene od proizvajalca. Podane so v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ne predstavljajo zaveze ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: rabljeno, DONNÉES TECHNIQUES - Nombre d’axes : 7 - Nombre de broches : 2 BROCHE PRINCIPALE - Ø max. de la barre : 32 [mm] - Longueur maximale usinable : 250 [mm] Pedpeyhrlyofx Anpogu - Vitesse de broche : 7000 [tr/min] - Incrément minimal axe C : 0,1 [deg] CONTRBROCHE - Ø max. de la barre : 32 [mm] - Vitesse de broche : 7000 [tr/min] - Nombre de porte-bagues : 2 PORTE-BAGUES 1 - Nombre de positions : 5 - Nombre de positions motorisées : 4 - Vitesse outil motorisé : 5000 [tr/min] PORTE-BAGUES 2 - Nombre de positions : 5 TOURILLON FRONTAL - Nombre de positions : 5 OPÉRATIONS SECONDAIRES - Nombre de positions : 4 ALIMENTATION ÉLECTRIQUE - Tension d’alimentation : 380 [V] DIMENSIONS ET POIDS - Encombrement : 2150x1500 [mm] - Hauteur de la machine : 1800 [mm] - Poids de la machine : 2800 [kg] HEURES MACHINE - Heures de fonctionnement : 23 884 [h] ACCESSOIRES - Commande numérique : Fanuc - Lampe de statut tricolore - Prise de pièces - Éjecteur de pièces - Réservoir de liquide de refroidissement - Chargeur de barres hydraulique marque/modèle : IEMCA BOSS 332

Stanje: rabljeno, Leto izdelave: 1987, x-travel 400 mm y-travel 250 mm Workpiece height 485 mm CNC control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4,000 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Table traverse (longitudinal/X) max. 400 mm Table traverse (cross/Y) max. 250 mm Vertical adjustment of grinding slide max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Clearance table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16 ° Grinding Ø (bore max.) approx. 230 mm 18 spindle speeds depending on spindle motor steplessly adjustable 4,500-80,000 rpm. Planetary speed (C-axis) steplessly adjustable 5-250 rpm U-axis, radial infeed 6 mm Total drive approx. 10 kW - 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with display, for 4 axes (= XYC + U-axis), with interpolation in 2 ½ dimensions (XYC). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly at the machine, with various subprograms, as well as manual movement of axes via control panel or electronic hand-held unit. Separate digital readout for the Z-axis • U-axis as manual and controlled radial feed axis on the grinding head, with digital readout for feed position, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • HI-Cut device (oil cooling) and automatic fire suppression system • Separately standing coolant unit with belt filter, separately standing hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Pgsdpfx Anet Hw Txspsu Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock as inspected Payment: strictly net - upon receipt of invoice