BOEHRINGER VDF 315 CM

VDF Boehringer VDF 315 CM

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 405 mm, pomik po osi Z: 2.049 mm, Premer palice (maks.): 80 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840C, število osi: 3, Horizontalni stružnica iz leta 1997. Ta BOEHRINGER VDF 315 CM ima maksimalno dolžino struženja 2.049 mm in premer vpenjalne glave 400 mm. Opremljena je z gnanim orodjem za večjo prilagodljivost. Če iščete kakovostno stružnico, razmislite o BOEHRINGER VDF 315 CM, ki jo ponujamo v prodaji. Za več informacij nas kontaktirajte. • Premer vpenjalne glave: 400 mm Ppedpfoy Enqnex Afaju Tehnične specifikacije Proti-vreteno: Ne Gnano orodje: Da

Stanje: rabljeno, Leto izdelave: 2012, Turning diameter: 350 mm Turning length: 650 mm Control system: 840 D SL ShopTurn Siemens Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Main spindle speed range: 0 – 4,500 rpm Main spindle drive power: 11.5 / 8 kW Max. torque: 340 Nm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar capacity: 65 mm Max. chuck diameter: 250 mm Spindle nose: 170 h5 Number of tool stations: 12 positions Shank diameter DIN 69880: 30 mm Number of driven tool stations: 6 positions Speed range – driven tools: max. 4,500 rpm Drive power on driven tool stations: 5.5 kW X-axis travel: 255 mm Z-axis travel: 800 mm Tailstock quill travel: 680 mm Tailstock taper: MT 4 Clamping force: 6.8 kN Feed rate: 0 – 30,000 mm/min Rapid traverse (X / Y / Z): 30 / - / 30 m/min Feed force (X / Y / Z): 4.5 / - / 6.2 kN Total power requirement: 28 kW Machine weight: approx. 3.3 t Space requirements: approx. 5.0 x 2.5 x 2.3 m CNC universal lathe GILDEMEISTER - NEF 400 V3 - C-axis - Driven tools - Only approx. 8,093 spindle hours Ppjdey E Tvvepfx Afaju - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI holders - incl. 8x tool holders - incl. 4x driven tools (2x radial, 2x axial)

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 480 mm Maximum turning length: 2,000 mm Control system: Sinumerik 840 D Siemens Maximum swing diameter over bed cover: 520 mm Spindle speed range - main spindle: 7 - 2,800 rpm Gear stages: 2 Drive power - main spindle: 53 kW Maximum torque: 3,456 Nm Spindle nose: 11 DIN 55026 Chuck diameter: 315 mm Spindle bore: 103 mm Usable bar diameter: 82 mm X-axis travel: 405 mm Z-axis travel: 2,049 mm Quill diameter: 100 mm Ppsdpfx Ajvy Ig Tjfaeu Quill stroke: 100 mm Clamping force: 14 kN Quill taper: 30 DIN 2079 Rapid traverse: 10 m/min Feed speed: 0.1 - 10,000 mm/min Feed force: 15 kN Number of tool stations: 12 positions Driven stations: 6 positions Shank diameter: 50 mm Drive power: 5.4 kW Maximum speed: 2,500 / 625 rpm Maximum torque: 25 / 100 Nm Total power requirement: approx. 50 kW Machine weight: approx. 14 t Space requirement: approx. 6.4 x 3.8 x 3.0 m CNC Lathe VDF BOEHRINGER - VDF 315 Cm / DL 2000 - incl. 2x workbenches

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 480 mm, • Prenova revolverja leta 2021 • Vgradnja KSS črpalke z večjim tlakom/preskrbo leta 2021 • Obnovljena vlečna cev in novo ležajeno ter brušeno vreteno leta 2022 • Pripravljeno za avtomatsko vstavljanje delov z robotsko celico Krmiljenje: CNC krmiljenje s barvnim zaslonom Siemens 840 D TEHNIČNI PODATKI Maksimalni premer vrtenja: 550 mm Maksimalni stružni premer: 480 mm Stružna dolžina: 1000 mm Premer vretena: 78 mm Pogonska moč (50%): 53 kW Območje vrtljajev (1-stopenjsko): 30 – 4000 1/min Revolverska glava: Število mest za orodja: 12, od tega gnanih: 6 Vpenjalo za cilindrična stebla: 40 mm Območje vrtljajev (2-stopenjsko): 20 – 2500 1/min Konjiček (hidravlična nastavitev pinole) OPREMA/PRIBOR  Popolna ohišja z osvetlitvijo delovnega prostora  Samodejna motorizirana drsna vrata  C-os  Programirano povlečen konjiček z raznimi centrirnimi konicami Podpsvr Tkzjfx Afaepu  12-kratna revolverska glava  Pogonski sklop za revolver  Transporter za odrezke  Naprava za hlajenje z okrepljeno črpalko, pribl. 4 bara  Vmesnik za avtomatizacijo  Razni dodatki  1x vpenjalni tulec Heimbuch SK 80, brez vpenjalnih klešč  1x triveljasto vpenjalo Schunk Rota NCF 315  1x triveljasto vpenjalo Schunk Rota NCF 250  1x dvoveljasto vpenjalo Schunk Rota NCF 250  1x strižna glava WTO  2x gnano orodje CAPTO-aksialno orodje  2x gnano orodje CAPTO-aksialno radialno orodje  3x gnano orodje CAPTO-radialno orodje  7x fiksno držalo za orodje  Elementi za postavitev  Dokumentacija

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 1.760 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 380 mm, stružna dolžina: 650 mm, izvrtina vretena: 66 mm, največja hitrost vretena: 4.500 obr/min, največja hitrost vrtenja: 4.500 obr/min, premer nihanja nad prečnim premičnikom: 380 mm, zunanji premer vpenjalne glave: 210 mm, Premer palice (maks.): 66 mm, Oprema: dokumentacija / priročnik, Ponujamo to rabljeno CNC stružnico DMG MORI NEF 400, letnik 2014. tip: NEF 400 serijska številka: 01620009641 leto izdelave: 2014 maksimalno število vrtljajev glavnega vretena: 4500 1/min Hidravlična vpenjalna glava Premer nad sani: 380 mm Stružna dolžina: 650 mm Siemens Shopturn 840 D Premer palice: 66 mm Hidravlična konica Ppsdpjy Iuvcjfx Afaou 12-pozicijski revolver S transporterjem za ostružke Samo 1760 ur vretena Za dodatna vprašanja ali več informacij nam pošljite sporočilo ali nas pokličite.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.500 kg, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 2.170 mm, potovalna razdalja osi X: 390 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 840D sl + ShopTurn mit „manual machine“, premer struženja nad prečnim suportom: 370 mm, širina postelje: 433 mm, višina središča: 315 mm, širina na sredini: 2.000 mm, premer tulec: 100 mm, poteza s peresom: 200 mm, hitri pomik na osi Z: 8 m/min, hitro pomikanje X-os: 8 m/min, izvrtina vretena: 140 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 2 obr/min, premer struženja nad ležiščem sani: 630 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Swing diameter over bed: 630 mm Distance between centers: 2000 mm Max. speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Including equipment such as: - 8-position SAUTER turret VDI-40 - Movable control panel along the entire machine length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M-function) gearbox stage change (2 stages) - Work area enclosed by two sliding doors - Operating mode 1 and operating mode 2 (Setup mode with 5 rpm) - Siemens 840D sl ShopTurn CNC with "manual machine" mode - 15-inch touchscreen (16:9 format) - In manual machine mode, cycles can be run without generating a program header - Siemens control option: remnant material detection - Absolute encoders (no homing/reference run required) - USB interface at control panel - Manual tailstock with drag device and 100 mm quill diameter - Automatic central lubrication Podpswgbuisfx Afajpu - Coolant system

Stanje: zelo dobro (rabljeno), Heraeus / Thermo Type: WU 6100 Forced Air Drying Oven 500°C Description Heraeus WU 6100 Heat and Drying Oven up to 500°C Forced air oven for thermal testing of high-quality materials. Suitable for precise heat treatment processes up to 500°C Offers accurate and uniform temperature distribution as well as exact adherence to the selected temperature. Podpfxewq Rl Eo Afaspu Technical Data: Internal volume: 52 L Temperature range up to 500°C External dimensions (W x H x D): 744 x 552 x 535 mm Internal dimensions (W x H x D): 403 x 380 x 370/339 mm Weight: 53 kg 400 V 50/60 Hz 11.4 A 5.4 kW Equipment: Temperature controller with digital display Over and under temperature protection Throttle valve for stepless adjustment of fresh and exhaust air Time control Variable speed adjustment for the recirculating fan Stainless steel inserts Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data, information given without liability!) If you have any further questions, we will be happy to assist you by phone.

Leto izdelave: 2010, stanje: novo, Spare part for CNC machining center Manufacturer: DMG MORI Model: DMF 220 Linea Parts are new Ballscrew for Y and Z axis Podpfx Afod S A Unjajpu Guide rail package for complete X axis, with brake.

Stanje: zelo dobro (rabljeno), BLB GmbH, your provider for new and used warehouse technology. We offer racking systems, industrial trucks, accessories, and other warehouse equipment. This listing includes the following offer: Used pallet racking / Manufacturer: Meta Boltless racking system with pre-assembled frames, allowing for very quick assembly Configuration: 10 x racking bays, each with 4 x pairs of beams per bay Bay width: 2700 mm / Beam dimensions: 120 x 50 mm / Colour: black Quantity structure: - 11 frames, height approx. 7,500 mm / depth 1,100 mm / powder-coated black / pre-assembled - 80 beams, dimensions 120 x 50 mm, powder-coated black, incl. safety pins This listing is available twice! LARGER OR SMALLER QUANTITIES POSSIBLE! PLEASE ENQUIRE ABOUT YOUR DESIRED QUANTITIES. Additional accessories available at extra cost: - Floor anchors - Impact protection - Impact protection barriers - Wire mesh decking Net price: €2,950 ex stock Weißenhorn. An invoice with itemized VAT will be issued. Pjdpfsp I E Taox Afaopu Collection by the customer is welcome / free loading service / Nationwide delivery can be arranged – please inquire for your shipping costs. Sales of used goods are made without warranty or guarantee. Errors and prior sale of used goods expressly reserved.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 10.779 h, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 362 mm, pomik po osi Z: 1.250 mm, moč vretenovega motorja: 28.000 W, skupna masa: 6.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D SL, število mest v zalogovniku orodij: 12, število osi: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine is equipped with a 12-position disc turret and can be fitted with driven tools, increasing its versatility. If you are looking for a high-quality lathe, consider the DMG NEF 600 horizontal lathe we have for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-position disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant system with chip tray • Operating software: ShopTurn • Control panel: ERGOline control panel • CAD reader: Compatible with external PC • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Maximum draw tube diameter: 95 mm • Coolant spray gun: Supplied • Chip conveyor: Right side discharge • Discharge height of chip conveyor: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50-200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • Tool spindle 1: 90° angled, driven tool holder • Tool spindle 2: Straight 0° tool mount • Tool spindle application: Drilling, milling, and thread cutting • Tool holder shank standard: DIN 69880-40 • Cooling unit for control cabinet: Up to 40°C • DMG Netservice onboard: Integrated Pedpfey Twc Nsx Afaepu OPTIONAL Approx. 100 various tool holders (VDI holders) Technical Specification Counter Spindle: No Driven Tools: Yes